50 Excel VBA Oral Interview Questions
Solution: ByRef: If you pass an argument by reference when calling a procedure the procedure access to the actual variable in memory. As a result the variable's value can be changed by the procedure. ByVal: If you pass an argument by value when calling a procedure the variable's value can be changed with in the procedure only outside the actual value of the variable is retained. ByRef is default: Passing by reference is the default in VBA. If you do not explicitly specify to pass an argument by value VBA will pass it by reference.
Solution: Option Explicit makes the declaration of Variables Mandatory while Option Base used at module level to declare the default lower bound for array subscripts. For eg. Option Base 1 will make the array lower bound as 1 instead of 0.
Solution: i) The Boolean data type has only two states, True and False. These types of variables are stored as 16-bit (2 Byte) numbers, and are usually used for flags. ii) The Byte data type is an 8-bit variable which can store value from 0 to 255. iii) The Double data type is a 64-bit floating point number used when high accuracy is needed. iv) The Integer data type is a 16-bit number which can range from -32768 to 32767. Integers should be used when you are working with values that can not contain fractional numbers. In case, you're working over 32767 rows use Long as data type. v) The Long data type is a 32-bit number which can range from -2,147,483,648 to 2,147,483,647. vi) The Single data type is a 32-bit number ranging from -3.402823e38 to -1.401298e-45 for negative values and from 1.401298e-45 to 3.402823e38 for positive values. When you need fractional numbers within this range, this is the data type to use. vii) The String data type is usually used as a variable-length type of variable. A variable-length string can contain up to approximately 2 billion characters. Each character has a value ranging from 0 to 255 based on the ASCII character set.
Solution: ThisWorkbook refers to the workbook where code is being written while ActiveWorkbook refers to the workbook which is in active state with active window. In case of only one workbook open, ActiveWorkbook is same as ThisWorkbook.
Solution: Last Row in a column can be find using End(xlUp) and Last Column in a row can be find using End(xlToLeft). For e.g. Range("A1048576").End(xlUp).Row gives last used row of Column A.
Solution: i) Forms controls can be used on worksheets and chart sheets. Forms controls can also be placed within embedded charts in Classic Excel (though not in Excel 2007). ActiveX controls can only be used on worksheets. ActiveX controls do not work in MacExcel. ii) The Forms controls aren’t very complicated, and they have been part of Excel for longer (they were used in Excel 5/95’s dialog sheets) than the Controls Toolbox (Excel 97), so it stands to reason that they’d be more seamlessly integrated. Being newer, the ActiveX controls have richer formatting possibilities. Both can link to cells and ranges in the worksheet.
Solution: i) Subroutines never return a value but functions does return values. ii) A function could not change the values of actual arguments whereas a subroutine could change them.
Solution: Using Breakpoints(F9), Step-by-step execution (F8), Debug.Print & Immediate Window and Watch window.
Solution: Application --> Workbooks --> Worksheets --> Range / Chart
Solution: For details click here --> http://msdn.microsoft.com/en-us/library/ms172576%28VS.80%29.aspx All the controls in the ToolBox except the Pointer are objects in Visual Basic. These objects have associated properties, methods and events. A property is a named attribute of a programming object. Properties define the characteristics of an object such as Size, Color etc. or sometimes the way in which it behaves. A method is an action that can be performed on objects. For example, a cat is an object. Its properties might include long white hair, blue eyes, 3 pounds weight etc. A complete definition of cat must only encompass on its looks, but should also include a complete itemization of its activities. Therefore, a cat's methods might be move, jump, play, breath etc. Visual Basic programs are built around events. Events are various things that can happen in a program. Let us consider a TextBox control and a few of its associated events to understand the concept of event driven programming. The TextBox control supports various events such as Change, Click, MouseMove and many more that will be listed in the Properties dropdown list in the code window for the TextBox control. We will look into a few of them as given below. * The code entered in the Change event fires when there is a change in the contents of the TextBox * The Click event fires when the TextBox control is clicked. * The MouseMove event fires when the mouse is moved over the TextBox
Solution: Use Sheet's visible property and set it to xlSheetVeryHidden . For eg. Sheets(1).Visible = xlSheetVeryHidden will super hide the first worksheet of the workbook.
Solution: To unite the different ranges depending on the logic. It is similar to set union, here range works as set. For eg. Set nrange = Union(rng1,rng2)
Solution: XLM (used in Excel 97 or before) and VBA(used for 2000 and after). Obviously, VBA is in use these days.
Solution: There is a option "Allow users to edit ranges" can be used for this purpose.
Solution: Using 'Data Validation'.
Solution: No one can't. They're fixed as 65536(2^16) in Excel 2003 or before and 1048576(2^20) in Excel 2007 & Excel 2010.
Solution: No one can't. They're fixed as 256(2^8) in Excel 2003 or before and 16384(2^14) in Excel 2007 & Excel 2010.
Solution: We can create a workbook which cannot be modified but can not create a workbook which can't be copied.(It depends on system security, it has nothing to do with Excel or VBA)
Solution: By chance Excel's fixed-decimal mode was turned on. To return to normal,
Excel 2003 --> Click Tools and then Options to display the Options dialog box. Then click the Edit tab and remove the check mark from the "Fixed decimal " option. Excel 2007 --> Click Office button on Top-Left corner and click 'Excel Options'. Go to Advanced and Uncheck 'Automatically insert a decimal point' option. Excel 2010 --> Click File button on Top-Left corner and click 'Excel Options'. Go to Advanced and Uncheck 'Automatically insert a decimal point' option.
Of course, this feature can be useful when entering some types of data, but most of the time, you'll want to keep the fixed-decimal mode turned off.
Solution: You need to protect the workbook's structure. Excel 2003 --> Select Tools - Protection - Protect Workbook. In the Protect Workbook dialog box, make sure that the Structure checkbox is checked. Excel 2007/2010 --> Go to Review --> Click 'Protect Workbook' --> Click 'Protect Structure and Windows'
If you specify a password, that password will be required to unprotect the workbook. When a workbook's structure is protected, the user may not: * Add/Delete a sheet * Hide/Unhide a sheet * Rename a sheet * Move a sheet
Solution: Excel provides three ways to protect a workbook: * Require a password to open the workbook * Prevent users from adding sheets, deleting sheets, hiding sheets, and unhiding sheets * Prevent users from changing the size or position of windows
Solution: Use Application.Dialogs(xlDialogFont).Show or Application.Dialogs(xlDialogFormatFont).Show to load font dialog box from Excel VBA.
Solution: ADO : ActiveX Data Objects is universal data access framework that encompasses the functionality of DAO. ODBC : Open Database Connectivity(ODBC) is a windows technology that lets a database client application connect to a external database. OLEDB : Low level programming interface designed to access a wide variety of data access Object Linking and Embedding (OLE).
Solution: Activesheet.PageSetup.PaperSize = xlPaperLetter (Similarly xlPaperA4 or xlPaperLegal etc.)
Solution: Any of the three methods can be used: i) Create a class with the properties you require to return and then return the object of the class from the function. ii) Using ByRef for the values. iii) Return an array of the values.
Solution: Yes because VBA is VB6.0 based which is an Object Based Programming Language and is also known as 'Event Driven Programming' and it supports Polymorphism, Encapsulation and partially Inheritance.
Solution: Set Cancel property of Button to True on the Form.
Solution: Type libraries are files that explicitly describe some or all of the contents of components. This includes information about the methods properties constants and other members exposed by the component. Development tools such as Visual Basic make use of the information contained in the type library to help you as a developer access and use the component. In addition type libraries provide a convenient way to include a simple level of descriptive documentation for component members. You can use them through 'Tools --> References' in VBE.
Solution: A computer registry can be used to store configuration settings and application initialization. We can use Getsetting function to read registry settings and save settings function to write registry settings. Application name, section, key, setting, and default are to be specified for registry modifying. It is advisable to know about your computer settings before modifying registry settings.
Solution: Variant data type is able to hold any other data type, including numbers, strings, dates, and object references. A Variant's descriptor is only 16 bytes long (4 short words for the type, and 2 long words for the data, or data pointer). Pros: You cannot use Null with any variable type other than Variant. You don't need to worry about what you have declared a variable as. When a Variant has been declared but not assigned a value, it contains the special value Empty. Cons: A developer may not remember and misuse a variable assigning any value to it which will be type-casted without errors.
Solution: The reasons which made Microsoft drop its support to VBA are as follows, Microsoft visual basic relies heavily on machine code which was written for Power PC architecture. Also it would take another two years for developing VBA support for its architecture. It also states that Microsoft will incorporate VBA in the next script of office release for Mac.
Solution: Volatile functions are a type of function that will always recalculate. That means whenever Excel needs to calculate any part of the worksheet, those cells containing volatile functions will also calculate.
Solution: Some of Excel’s functions are obviously volatile: RAND(), NOW(), TODAY() Others are less obviously volatile: OFFSET(), CELL(), INDIRECT(), INFO() Some are volatile in some versions of Excel but not in others: INDEX()became non-volatile in Excel 97. A number of functions that are documented by Microsoft as volatile do not actually seem to be volatile when tested: INDEX(), ROWS(), COLUMNS(), AREAS() and CELL("Filename") IS volatile although a MSKBN article says its not. One particular syntax of SUMIF is volatile in Excel 2002 and subsequent versions: =SUMIF(A1:A4,">0",B1) is volatile whereas =SUMIF(A1:A4,">0",B1:B4) is not volatile.
Solution: By adding Application.Volatile statement to it. It must be the first line of your User Defined Function.
Solution: Actually INDEX is not a volatile function, even though some MicroSoft documentation says it is. Anyway no its not possible to apply Application.Volatile(False) to a built-in Excel function except by duplicating what the built-in function does inside a UDF.
Solution: Dependency trees are excel way of minimizing the calculation by tracking what has changed since last calculation. It allows Excel to recalculate only: * Formulae/Names that have changed. * Formulae containing Volatile Functions * Formulae dependent on changed or volatile formulae or cells or names.
Excel determines dependencies by looking at the cells referred to by each formula and by the argument list of each function. Dependency trees are immediately updated whenever a formula is entered or changed. To force the dependency trees to be rebuilt and all formulae calculation use CTRL+ALT+SHIFT+F9.
Solution:
| Shortcut Combination | VBA Equivalent | Meaning |
| F9 | Application.Calculate | Recalculate |
| Ctrl+Alt+F9 | Application.CalculateFull | Full Calculation |
| Ctrl+Alt+Shift+F9 | Application.CalculateFullRebuild | Rebuild Excel Dependency Tree and Full Calculation |
| Shift+F9 | Sheets(1).Calculate | Calculate Worksheet |
Solution: To add the specified cells to the list of cells requiring calculation at the next recalculation.
Solution: Pretty simply, using the Application.CalculationState property which tells if calculation has completed ( xlDone ), is pending ( xlPending) , or is in process ( xlCalculating ).
Solution: Using Application.CalculationInterruptKey= XlAnyKey | XLEscKey | XlNokey. Remember using XlNokey, calculation cannot be interrupted.
Solution: When this property is set to True, dependencies are not loaded at open, the dependency dirty chain is not updated, and every calculation of the workbook is a full calculation rather than a recalculation.
If you have a workbook that has so many complex dependencies that loading the dependencies at workbook open takes a long time or recalculation takes longer than full calculation, you can use this property to force Excel to skip loading the dependencies and always use full calculation. Also if making a change to the workbook takes a long time in manual mode because of the time taken to dirty all the dependencies of the cell being changed, then setting Workbook.ForceFullCalculation to True will eliminate the delay.
* Although this is a workbook property the effect is at Application level rather than workbook level. * In Excel 2007 setting the property back to False once it has been set to True has no effect on the current Excel session. * The property is saved and restored with the workbook. * Once this property has been set to True 'Calculate' shows in the status bar and cannot be removed by using calculation keys such as F9.
Solution: There are two limits to the number of dependencies that Excel versions prior to Excel 2007 can track before it must do full calculations instead of recalculations. * The number of different areas in a sheet that may have dependencies is limited to 65,536. * The number of cells that may depend on a single area is limited to 8K. After the workbook has passed these limits, Excel no longer attempts to recalculate only changed cells. Instead, it recalculates all cells at each calculation.
Solution: There are five known conditions in which the status bar will show CALCULATE: * The Calculation Option has been set to Manual and the workbook contains uncalculated formulae. Try setting calculation to Automatic (Tools-->Options-->Calculate). Note that Excel sets the calculation mode from the first workbook opened in a session: when you open two workbooks, one saved in manual mode and one saved in automatic mode, they will both have the calculation mode of the first workbook opened. * The Iteration Option is turned on and the workbook contains circular references. Check that turning off Iteration (Tools-->Options-->Calculation) and pressing F9 shows "Circular Reference" in the statusbar. * You are using Excel 2000 without the SR1 update and have a user-defined function that attempts to define a name and depends on a volatile function: see MSKB Q248179 * You have hit one of Excels limits for tracking dependencies. * You are using Excel 2007 and have set Workbook.ForceFullCalculation to True
Solution: Excel 2007 can split calculation across multiple processors or cores. When Excel 2007 loads a workbook, it determines from the operating system how many processors are available and then creates a separate calculation thread for each processor. These threads can then run in parallel. The beauty of this system is that it scales extremely well with the number of processors.
Most workbooks show a significant improvement in calculation speed on a system with multiple cores. The degree of improvement depends on how many independent calculation trees the workbook contains. If you make a workbook that contains one continuous chain of formulas, it will not show any multithreaded calculation (MTC) performance gain, whereas a workbook that contains several independent chains of formulas will show gains close to the number of processors available.
Solution: Shell command present in VBA can be used to start the dialer present in windows operating system. Phone number can be used to connect to your modem. With the use of shell and sendkeys you can dial to your user. Shell starts windows application and sendkeys inform the window to dial according to the keystrokes of the application. A macro can be used to start the cardfile program which activates the auto dialer feature.
Solution: VBA is licensed to Microsoft and this compatible with and only Microsoft products. Code written is compiled by an intermediate language called P-code and this is stored in hosting applications such as Excel, Word and Access. The intermediate code is interpreted by a virtual machine. This code and intermediate language is the exclusive right of Microsoft.
Solution: The chief use of VBA is to make use of its special function which helps in repeated actions. Goal seek function helps to reduce manual entry of the code each and every time. This solves the problem of repeated function entry by automating functions and actions. Sub routines are inserted into the using the VBA editor and command insert module.
Solution: Visual basic is useful if you are planning to develop your programs from scratch.This language helps you in developing Active x controls, exe files, etc. VB script is a powerful tool, through which you can create small scale applications on web pages, automation applications, etc. Integrated development environment is not present for VB script. Visual Basic for Applications are very useful in automating your existing application. VB application is useful for developing already existing applications.
Solution:
Sub NonBlankCells()
On Error Resume Next
Union(Cells.SpecialCells(xlCellTypeFormulas, 23), Cells.SpecialCells(xlCellTypeConstants, 23)).Select
If Err.Number <> 0 Then
Cells.SpecialCells(xlCellTypeFormulas, 23).Select
Else
Exit Sub
End If
If Err.Number <> 0 Then
Cells.SpecialCells(xlCellTypeConstants, 23).Select
Else
Exit Sub
End If
On Error GoTo 0
End Sub
Ques 50. What is the difference between UsedRange
and CurrentRegion properties ?
Solution:
i) The
current region is a range bounded by any combination of blank rows and blank
columns.
This property is useful for many operations that automatically
expand the selection to include the entire current region, such as the
AutoFormat method. This property cannot be used on a protected worksheet.
The
UsedRange property is used to select the range of used cells on a worksheet. It
returns a Range object that represents the used range on the specified
worksheet.
ii) Every non-blank cell got its CurrentRegion and its keyboard
shortcut is Ctrl+Shift+Spacebar.
iii) There can be many current regions but
there is only one used range in a worksheet.