Oracle 11g 新特性之Highly Available IP(HAIP)

Redundant Interconnect with Highly Available IP (HAIP) 简介

      从11.2.0.2开始,Oracle 的集群软件Grid Infrastructure(GI)中新增了Redundant Interconnect with Highly Available IP(HAIP),以实现集群私网的高可用性和负载均衡。
  在11.2.0.2之前,私网的冗余一般是通过在OS上做网卡绑(如bonding, EtherChannel等)实现的,有了HAIP之后,无需使用网卡绑定就可以实现私网网卡的冗余。
  在安装GI的过程中,可以定义多个私网网卡来实现私网的冗余,如图:

 

安装后,HAIP地址自动设置为169.254.*.*,这个地址不可以手动设置。HAIP 最少为1个,最多为4个(1块网卡,1个HAIP;2块网卡,2个HAIP; 3块及以上,4个HAIP), 均匀的分布在私网的网卡上。

案例:


1. 查看HAIP资源状态

$ crsctl stat res -t -init 

NAME                               

TARGET  STATE        SERVER   STATE_DETAILS  Cluster Resources

-------------------------------------------------------------------------------------------------

ora.cluster_interconnect.haip     

ONLINE  ONLINE        node2                      1

2.查看HAIP地址和分布情况。

#ifconfig -a

eth1      Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:66

          inet addr:192.168.254.32  Bcast:192.168.254.255  Mask:255.255.255.0

          inet6 addr: fe80::20c:29ff:fe4b:b766/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

......

 eth1:1    Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:66

          inet addr:169.254.31.199  Bcast:169.254.127.255  Mask:255.255.128.0  <=====HAIP address one.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          Interrupt:193 Base address:0x1800

 eth2      Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:70

          inet addr:192.168.254.33  Bcast:192.168.254.255  Mask:255.255.255.0

          inet6 addr: fe80::20c:29ff:fe4b:b770/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

......

 eth2:1    Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:70

          inet addr:169.254.185.222  Bcast:169.254.255.255  Mask:255.255.128.0  <=====HAIP address two.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          Interrupt:169 Base address:0x1880

haip均匀的分布在两个私网网卡上。


3. 断掉网卡eth1之后

eth2      Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:70

          inet addr:192.168.254.33  Bcast:192.168.254.255  Mask:255.255.255.0

          inet6 addr: fe80::20c:29ff:fe4b:b770/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:3206 errors:0 dropped:0 overruns:0 frame:0

          TX packets:3916 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:1474658 (1.4 MiB)  TX bytes:2838774 (2.7 MiB)

          Interrupt:169 Base address:0x1880

 eth2:1    Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:70

          inet addr:169.254.185.222  Bcast:169.254.255.255  Mask:255.255.128.0 <=====HAIP address two.

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          Interrupt:169 Base address:0x1880

 eth2:2    Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:70

          inet addr:169.254.31.199  Bcast:169.254.127.255  Mask:255.255.128.0 <=====HAIP address one. 网卡一eth1的HAIP漂移到eth2上
UP BROADCAST RUNNING MULTICAST MTU:
1500 Metric:1 Interrupt:169 Base address:0x1880

 HAIP one 漂移到了网卡eth2上。
4. 网卡eth1恢复之后。

eth1      Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:66

          inet addr:192.168.254.32  Bcast:192.168.254.255  Mask:255.255.255.0

          inet6 addr: fe80::20c:29ff:fe4b:b766/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

......

 eth1:1    Link encap:Ethernet  HWaddr 00:0C:29:4B:B7:66

          inet addr:169.254.31.199  Bcast:169.254.127.255  Mask:255.255.128.0 <=====HAIP address one. HAIP又回来了
UP BROADCAST RUNNING MULTICAST MTU:
1500 Metric:1 Interrupt:193 Base address:0x1800 eth2 Link encap:Ethernet HWaddr 00:0C:29:4B:B7:70 inet addr:192.168.254.33 Bcast:192.168.254.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe4b:b770/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ...... eth2:1 Link encap:Ethernet HWaddr 00:0C:29:4B:B7:70 inet addr:169.254.185.222 Bcast:169.254.255.255 Mask:255.255.128.0 <=====HAIP address two. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:169 Base address:0x1880

HAIP one 回到了网卡eth1上。
注意:HAIP地址失败不会对ocssd产生影响,也就是说HAIP失败,不会导致节点重启。


HAIP 对数据库和ASM的影响


数据库和ASM实例使用这个HAIP作为cluster interconnect,以下是alert.log的片段。

Cluster communication is configured to use the following interface(s) for this instance

  169.254.31.199

  169.254.185.222

cluster interconnect IPC version:Oracle UDP/IP (generic)

IPC Vendor 1 proto 2

Oracle数据库和ASM实例可以通过HAIP来实现私网通讯的高可用性负载均衡私网的流量会在这些私网网卡上实现负载均衡,
如果某个网卡出现了故障,它上面的HAIP会自动切换到别的可用的私网网卡上,从而不影响私网的通讯。
注意:HAIP 是不允许被手动停止或禁用的,除非是由于某些版本或者平台不支持。

关于HAIP的更多介绍,请参考My Oracle Support Note 文档1210883.1.

 

以上文章整理自:

https://blogs.oracle.com/Database4CN/entry/11gr2_rac_%E6%96%B0%E7%89%B9%E6%80%A7%E4%B9%8Bhighly_available_ip

 

你可能感兴趣的:(oracle 11g)