部署备份

 

sudo apt-get install gcc
sudo apt-get install build-essential

sudo apt-get install gcc g++ build-essential libssl-dev libreadline5-dev zlib1g-dev linux-headers-generic

sudo apt-get install zlib1g-dev libssl-dev libreadline5-dev libxml2-dev

sudo apt-get install libcurl4-openssl-dev libssl-dev zlib1g-dev libreadline5-dev
 
 
 
 
 
 
 
 

sudo apt-get install curl  git-core
 
 
 
 

sudo apt-get install bison build-essential zlib1g zlib1g-dev libssl-dev libreadline5-dev libxml2-dev subversion autoconf
 
 
 
mlzboy@mlzboy:~$ bash < <( curl http://rvm.beginrescueend.com/releases/rvm-install-head ) 
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
109   986  109   986    0     0    957      0  0:00:01  0:00:01 --:--:--  4268
Initialized empty Git repository in /home/mlzboy/.rvm/src/rvm/.git/
remote: Counting objects: 16240, done.
remote: Compressing objects: 100% (4166/4166), done.
remote: Total 16240 (delta 10951), reused 15861 (delta 10649)
Receiving objects: 100% (16240/16240), 2.91 MiB | 197 KiB/s, done.
Resolving deltas: 100% (10951/10951), done.

  RVM:  Shell scripts enabling management of multiple ruby environments.
  RTFM: http://rvm.beginrescueend.com/
  HELP: http://webchat.freenode.net/?channels=rvm (#rvm on irc.freenode.net)

Installing RVM to /home/mlzboy/.rvm/
    Correct permissions for base binaries in /home/mlzboy/.rvm/bin...
    Copying manpages into place.

Notes for Linux ( DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS" )

NOTE: 'ruby' represents Matz's Ruby Interpreter (MRI) (1.8.X, 1.9.X)
             This is the *original* / standard Ruby Language Interpreter
      'ree'  represents Ruby Enterprise Edition
      'rbx'  represents Rubinius

bash >= 3.2 is required
curl is required
git is required (>= 1.7 recommended)
patch is required (for ree and some ruby-head's).

If you wish to install rbx and/or Ruby 1.9 head (MRI) (eg. 1.9.2-head),
then you must install and use rvm 1.8.7 first.

If you wish to have the 'pretty colors' again,
  set 'export rvm_pretty_print_flag=1' in ~/.rvmrc.

dependencies:
# For RVM
  rvm: bash curl git

# For JRuby (if you wish to use it) you will need:
  jruby: aptitude install curl sun-java6-bin sun-java6-jre sun-java6-jdk

# For Ruby (MRI & ree)  you should install the following OS dependencies:
  ruby: aptitude install build-essential bison openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-0 libsqlite3-dev sqlite3 libxml2-dev libxslt-dev autoconf

# In addition to ruby: dependencies,
  ruby-head: subversion

# For IronRuby (if you wish to use it) you will need:
  ironruby: aptitude install curl mono-2.0-devel

  You must now complete the install by loading RVM in new shells.

  1) Place the folowing line at the end of your shell's loading files
     (.bashrc or .bash_profile for bash and .zshrc for zsh),
     after all PATH/variable settings:

     [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"  # This loads RVM into a shell session.

     You only need to add this line the first time you install rvm.

  2) Ensure that there is no 'return' from inside the ~/.bashrc file,
     otherwise rvm may be prevented from working properly.

  This means that if you see something like:

    '[ -z "$PS1" ] && return'

  then you change this line to:

  if [[ -n "$PS1" ]] ; then

    # ... original content that was below the '&& return' line ...

  fi # <= be sure to close the if at the end of the .bashrc.

  # This is a good place to source rvm v v v
  [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"  # This loads RVM into a shell session.

EOF - This marks the end of the .bashrc file

     Be absolutely *sure* to REMOVE the '&& return'.

     If you wish to DRY up your config you can 'source ~/.bashrc' at the bottom of your .bash_profile.

     Placing all non-interactive (non login) items in the .bashrc,
     including the 'source' line above and any environment settings.

  3) CLOSE THIS SHELL and open a new one in order to use rvm.

  WARNING:  you have a 'return' statement in your ~/.bashrc
              This could cause some features of RVM to not work.

  This means that if you see something like:

 '[ -z "$PS1" ] && return'

  then you change this line to:

 if [[ -n "$PS1" ]] ; then

    # ... original content that was below the '&& return' line ...

 fi # <= be sure to close the if at the end of the .bashrc. # This is a good place to source rvm v v v [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # This loads RVM into a shell session.

EOF - This marks the end of the .bashrc file

  Even if you are using zsh you should still adjust the ~/.bashrc
  If you have any questions about this please visit
    #rvm on irc.freenode.net.

Installation of RVM to /home/mlzboy/.rvm/ is complete.

mlzboy,

Thank you very much for using RVM! I sincerely hope that RVM helps to
make your work both easier and more enjoyable.

If you have any questions, issues and/or ideas for improvement please
join#rvm on irc.freenode.net and let me know, note you must register
(http://bit.ly/5mGjlm) and identify (/msg nickserv <nick> <pass>) to
talk, this prevents spambots from ruining our day.

My irc nickname is 'wayneeseguin' and I hang out in #rvm typically

  ~09:00-17:00EDT and again from ~21:00EDT-~23:00EDT

If I do not respond right away, please hang around after asking your
question, I will respond as soon as I am back.  It is best to talk in
#rvm itself as then other users can help out should I be offline.

Be sure to get head often as rvm development happens fast,
you can do this by running 'rvm get head' followed by 'rvm reload'
or opening a new shell

  w⦿‿⦿t

    ~ Wayne

mlzboy@mlzboy:~$
 
   

    

   
 
 
 
 

$  rvm notes  

  

   测试安装是否成功 
  

  
 
   

 
   

 
   

    
     

      

       Java代码  
      
     
 
     
type rvm | head -n1
   
 
   

应输出 
 
    
rvm is a function
   
 
 
   
 
 
   
sudo apt-get install libpcre3 libpcre3-dev 
 
   

 
   
sudo apt-get install libcurl4-openssl-dev
 
   
 
 
  
sudo apt-get install openssl libssl-dev



  
 
   


    

     
sudo apt-get install build-essential libpcre3-dev libssl-dev libxslt-dev libgd2-xpm-dev libgeoip-dev zlib1g-dev
    
   
 
 
   
 
 
  
 
 
sudo  apt-get install libpcre3 && \
sudo apt-get install zlib1g && \
sudo apt-get install libpcre3-dev && \
sudo apt-get install zlib1g-dev && \
sudo apt-get install libssl && \
sudo apt-get install libssl-dev

 gem install -V passenger

rvmsudo passenger-install-nginx-module

选择自己编译安装

nginx安装路径/usr/local/nginx

外加参数

--with-http_flv_module --with-http_gzip_static_module 


另外: 如果不想使用 passenger 自带脚本编译 nginx, 也可以手工编译 nginx 时加入 –add-module=’/home/jerry//opt/passenger/ext/nginx 参数, 来启用 passenger 模块.

 

Nginx with Passenger support was successfully installed.

 

The Nginx configuration file (/usr/local/nginx/conf/nginx.conf)

must contain the correct configuration options in order for Phusion Passenger

to function correctly.

 

This installer has already modified the configuration file for you! The

following configuration snippet was inserted:

 

  http {

      ...

      passenger_root /home/mlzboy/.rvm/gems/ruby-1.9.2-p0/gems/passenger-3.0.1;

      passenger_ruby /home/mlzboy/.rvm/wrappers/ruby-1.9.2-p0/ruby;

      ...

  }

 

After you start Nginx, you are ready to deploy any number of Ruby on Rails

applications on Nginx.

 

Press ENTER to continue.

 

mysql安装

sudo apt-get install mysql-server-5.1

 

mysql配置记录

重启mysql服务

sudo service mysql restart

 

命令行

mysql -u root -p

 

命令行下查看utf8相关

 

show variables like 'character%';

 

 

配置文件所在路径:

sudo vi /etc/mysql/my.cnf

 

配置文件的更改以下两段

 

[client]

default-character-set=utf8

port = 3306

socket = /var/run/mysqld/mysqld.sock

 

[mysqld]

default-character-set=utf8

init_connect='SET NAMES utf8'

default-time-zone = '+8:00'

 

mysql> show variables like '%time_zone%'; 

时区设置

   
    
 
     
 
      
sudo tzselect
 
     
 
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
mlzboy@mlzboy:~$ sudo cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
 
 
 
 
 
mlzboy@mlzboy:~$ sudo ntpdate cn.pool.ntp.org
 
 
 
 
 

 
 
 
 
 
10 Dec 14:04:43 ntpdate[1789]: step time server 114.80.81.1 offset 45.904550 sec
 
 
 
 
 
mlzboy@mlzboy:~$ 
 
 
 
 
 
mlzboy@mlzboy:~$ date
 
 
 
 
 
Fri Dec 10 14:04:45 CST 2010
 
 
 
 
 
 
 
 
 
 
 
mysql -u root -p
 
 
 
 
 
select now();
 
 
 
 
 

 
 
 
 
 

 
 
 
 
 

 
 
 
 
 
rvm gemset create b2c2
 
 
 
 
 
rvm 1.9.2@b2c2 --default
 
 
 
 
 
gem install rails#有bundler这里其实不需要了
 
 
 
 
 

 
 
 
 
 

 
 
 
 
 

 
 
 
    

     

      
 
       
sudo apt-get install imagemagick
 
       
paperclip插件需要这个库预先装，一般情况下已经装了
 
      
     
    
 
 
 
 
 
 
 
 
 
 
 
安装rails3的mysql2 gem需要sudo apt-get install libmysql-ruby libmysqlclient-dev
 
 
 
 
 
安装sqlite3-rubygem需要下面这个库的支持
 
 
 
 
 
这时候应该只需安装sqlite3-ruby，由于缺少sqlite3.h，因此我们需要先安装 ubuntu下的libsqlite3-dev包 
 
 
 
 
 
 
 
 
 
 
 
    
sudo apt-get install libsqlite3-dev
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
进入b2c2进行
 
 
 
 
 
gem install bundler
 
 
 
 
 
bundle install#其实由于使用了bundle install 不需要单独再安装gem install rails
 
 
 
 
 
目前还在开发环境的部署，转到生产，可能还有一些局部要调整的地方 
 
 
 
 
 
rake db:drop:all#清除掉各种环境下的数据库
 
 
 
 
 
rake db:create
 
 
 
 
 
mysql -uroot -p
 
 
 
 
 
show databases;
 
 
 
 
 

 
 
 
 
 
rake db:schema:load
 
 
 
 
 

 
 
 
 
 
rvm wrapper 1.9.2@b2c2 passenger 
 
 
 
 
 

 
 
 
 
 
解压缩每日备份的mysql
 
 
 
 
 
gunzip 2010-12-10.gz
 
 
 
 
 

 
 
 
 
 
使用rails console 进去后能看到具体的当前的版本
 
 
 
 
 
 
 
 
 
mlzboy@mlzboy:~/b2c2$ rails c
 
 
 
 
 
Loading development environment (Rails 3.0.1)
 
 
 
 
 
c