Configuring VM Acceleration on Linux

Linux-based systems support virtual machine acceleration through the KVM software package. Followinstructions for installing KVM on your Linux system, and verify that KVM is enabled. In addition to following the installation instructions, be aware of these configuration requirements:

• Running KVM requires specific user permissions, make sure you have sufficient permissions according to the KVM installation instructions.

• If you use another virtualization technology in your Linux platform, unload its kernel driver before running the x86 emulator. For example, the VirtualBox driver program is vboxdrv.

To run an x86-based emulator with VM acceleration:

• If you are running the emulator from the command line, start the emulator with an x86-based AVD and include the KVM options:

  emulator -avd <avd_name> -qemu -m 512 -enable-kvm

     

  Note: You must provide an x86-based AVD configuration name, otherwise VM acceleration will not be enabled.

• If you are running the emulator from Android Studio, run your Android application with an  x86-based AVD and include the KVM options:

1. In Android Studio, click your Android module folder and then select Run > Edit Configurations...

2. In the left panel of the Run/Debug Configurations dialog, select your Android run configuration or create a new configuration.

3. Under the Target Device options, select the x86-based AVD you created previously.

4. In the Emulator tab, in the      Additional command line options field, enter:      

   -qemu -m 512 -enable-kvm

        

5. Run your Android project using this run configuration.

Important: When using the -qemu command line option, make sure it is the last parameter in your command. All subsequent options are interpreted as qemu-specific parameters.