wordpress安装 相关

64 位ubuntu 安装 32位兼容包

apt-get install ia32-libs
刚看了一下，wordpress才11个表太神奇了，这么复杂的系统，amazing
 
参考以下文章
http://9hills.us/2011/01/wordpress/
http://dueam.org/2010/09/ubuntu-server-%E5%AE%89%E8%A3%85%E4%B8%8E%E9%85%8D%E7%BD%AElnmp%E5%B9%B6%E5%AE%89%E8%A3%85wordpress/（主要）
安装的过程还算顺利，只是在几个server间切换，搞混了


php-fpm在10.04上没有进官方源，我们添加ppa源。

   
   
 
    
sudo apt-get install python-software-properties
sudo add-apt-repository ppa:brianmercer /php
sudo apt-get update
 
   

sudo apt-get install php5-fpm php5-mysql

service php5-fpm start
 

在nginx.conf中加入下面一段代码

server {
        listen   80 ;
        server_name  blog.geilibuy.com;

        #access_log  /var/log/nginx/localhost.access.log;

        index index.php index.htm index.html;
        root /var/www/wordpress;
        expires 7d;
        location ~ \.php$ {
                fastcgi_pass 127.0.0.1:9000;
                fastcgi_index index.php;
                fastcgi_param APPLICATION_ENV production;
                include fastcgi.conf;
                expires off;
        }
}

在/usr/local/nginx/conf/fastcgi.conf中(其实这里原来的就可以，是一样的，只是代码的顺序不一样而已)

将内容替换为

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;

完成之后通过：
root@lnmp:/home/windonly# nginx -t
the configuration file /etc/nginx/nginx.conf syntax is ok
configuration file /etc/nginx/nginx.conf test is successful
 
来测试配置文件是否正确。
最后通过 service nginx reload 重启nginx
 

wget http://cn.wordpress.org/wordpress-3.0.5-zh_CN.tar.gz

tar -zxvf ./wordpress-3.0.5-zh_CN.tar.gz

  
  
 
   
 
    
 
     
 
 
     
 
      
 
       
sudo mv wordpress /var/www/
sudo chown -R www-data:www-data  /var/www/wordpress
 
        
      
 
 
    
 
   
 
  

 

 
通过：
vi /var/www/index.php
<? php
phpinfo();
?>
然后访问这个页面来测试是否配置成功了。
 

mysql -uroot -p

show databases;

create database b2c2_blog;

use mysql;

 create user 'user'@'localhost' identified by 'password';
 

grant all on b2c2_blog.* to 'user'@'localhost';
 

FLUSH PRIVILEGES;

http://blog.geilibuy.com/

根据向导会生成wp-config.php文件

主题推荐

http://www.wpmes.cn/archive/red-wordpress-theme-hibeetle.html

http://www.os80.info/archives/72.html(不错）

改wordpress的footer.php来去掉一些信息

使用capistrano来部署wordpress

http://devblog.imedo.de/2008/06/23/wordpress-deployment-with-capistrano-2-and-git/

http://whomwah.com/2006/05/21/deploying-wordpress-using-capistrano/

http://whomwah.com/2009/02/01/deploying-wordpress-to-slicehost-using-capistrano-and-git/(主要是这篇)

mkdir wordpress

cd wordpress

capify .

cap deploy:setup#进行初始化

部署代码的机子要向github所在的server提交公钥，参考http://help.github.com/linux-key-setup/

在我的测试中并不是把公钥提交就可以了，还要再连接一遍先

esting things out
Testing if our new key works is simple, we just ssh to github.  If 
this is the first time you’re connecting you’ll have to save the 
server’s key.  You can confirm the fingerprint on the SSH keys tab of the account settings page
$ ssh [email protected]
The authenticity of host 'github.com (207.97.227.239)' can't be established.
RSA key fingerprint is 16:27:ac:a5:76:28:2d:36:63:1b:56:4d:eb:df:a6:48.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'github.com,207.97.227.239' (RSA) to the list of known hosts.
ERROR: Hi tekkub! You've successfully authenticated, but GitHub does not provide shell access
Connection to github.com closed.
这样记住了之后再执行cap deploy才能真正访问
如果没有设置会导致如下的错误
  * executing "if [ -d /home/mlzboy/wordpress/shared/cached-copy ]; then cd /home/mlzboy/wordpress/shared/cached-copy && git fetch -q origin && git reset -q --hard ee90302da9134c62c5c0c841a69759f4b8c8129b && git clean -q -d -x -f; else git clone -q --depth 1 [email protected]:mlzboy/geilibuy-blog.git /home/mlzboy/wordpress/shared/cached-copy && cd /home/mlzboy/wordpress/shared/cached-copy && git checkout -q -b deploy ee90302da9134c62c5c0c841a69759f4b8c8129b; fi"
    servers: ["boy38girl.com"]
    [boy38girl.com] executing command
 ** [boy38girl.com :: err] Host key verification failed.
 ** [boy38girl.com :: err] fatal: The remote end hung up unexpectedly
    command finished
*** [deploy:update_code] rolling back
  * executing "rm -rf /home/mlzboy/wordpress/releases/20110213131718; true"
    servers: ["boy38girl.com"]
    [boy38girl.com] executing command
    command finished
failed: "sh -c 'if [ -d /home/mlzboy/wordpress/shared/cached-copy ]; then cd /home/mlzboy/wordpress/shared/cached-copy && git fetch -q origin && git reset -q --hard ee90302da9134c62c5c0c841a69759f4b8c8129b && git clean -q -d -x -f; else git clone -q --depth 1 [email protected]:mlzboy/geilibuy-blog.git /home/mlzboy/wordpress/shared/cached-copy && cd /home/mlzboy/wordpress/shared/cached-copy && git checkout -q -b deploy ee90302da9134c62c5c0c841a69759f4b8c8129b; fi'" on boy38girl.com

 
 



cap deploy
将nginx中的路径定位到/home/mlzboy/wordpress/current/public

使用ssh-keygen生成密钥对，是随机生成的，所以如果生成一次丢了其中的一个就很麻烦了
这是一个很奇怪的问题，侥幸解决了
ssh [email protected]
    [boy38girl.com] executing command
 ** [boy38girl.com :: err] Permission denied (publickey).
 ** [boy38girl.com :: err] fatal: The remote end hung up unexpectedly

 
 

  
  原因是在~/.ssh下同时有公钥和密钥，把公钥移走就好了
 
 
cd ~/.ssh
mv id_rsa.pub id_rsa.pub.bak
mlzboy@15-1688:~/.ssh$ ssh [email protected]
PTY allocation request failed on channel 0
Hi mlzboy! You've successfully authenticated, but GitHub does not provide shell access.

 
 

  
  reference 
  
  http://www.microsuncn.com/index.php?title=Fixed_Permission_denied_(publickey,gssapi-with-mic)
 
 
 
 

  
  
Fixed Permission denied (publickey,gssapi-with-mic)
  
  
 
   
If you have some problems likes Permission denied (publickey,gssapi-with-mic), or the error 'Not a RSA1 key file' when using ssh remote login, try to fix issues as below:
 
   
 
    
get more information with ssh -vvv [email protected], it's more important.
 
    
check the permissions of your private and public keys, id_rsa should 600, id_rsa.pub should 644
 
    
check if your id_rsa matched with id_rsa.pub.
 
   
 
   
For the 3rd, it looks very strange, I am not sure it's a bug of openssh or something. The id_rsa.pub is the public key for my windows host (I have ssh server on windows), the id_rsa is the private key for remote linux host, I put them to the .ssh folder.
 
   
But when I ssh login the linux host, I got "Permission denied (publickey,gssapi-with-mic)". if I remove id_rsa.pub from .ssh folder, it work fine.
 
   
 
    
 
     Categories:  
     HowTo |  
     Documentation 
    
 
   
 
  
 
 





其它相关问题
  
  

   
   
 
    

      SSH关于公钥认证Permission denied (publickey,gssapi-with-mic的问题 
    
 
   
   
   2010-07-09 14:39:58
  
  
  
  

   
   标签：
   
   SSH 
   
   Permission 
   
   denied 
   
   认证 
   
   publickey
  
  
  
  

   
   
SSH关于公钥认证Permission denied (publickey,gssapi-with-mic的问题
首先确认配置文件内PasswordAuthentication no这句要为no。
   
   
       在客户端中生成key时
Enter file in which to save the key 要注意不要自己改名，直接按确认就可以。其他步骤照常！
最后的id_rsa.pub大家就可以改名啦！
关于这个生成key时不能改名的问题还待研究下。 
   
   
 
   
   
 
   
   
 
   
   
 
   
   
 
   
   
 
   
   
之前在这一块在linode上出现一些问题，主要是在第一次添加用户的时候，应该是密码这一块搞错了，之后没有drop user去尝试，这回主要是用了drop user成功了
   
   
 
   
   

   
   
mysql> drop user 'geilibuy'@'localhost';
   
   
Query OK, 0 rows affected (0.00 sec)
   
   


   
   
mysql> create user 'geilibuy'@'localhost' identified by 'geilibuyxxx;//最后这个是密码
   
   
Query OK, 0 rows affected (0.00 sec)
   
   
 
    
grant all on b2c2_blog.* to 'geilibuy'@'localhost';