liunx机器开放8080端口

装好Tomcat7后,发现除了本机能访问外界访问不了,岂有此理。于是请教百度大神,在费一番周折后,总结步骤如下:

1.修改文件/etc/sysconfig/iptables

[root@bogon ~]# cd /etc/sysconfig/
[root@bogon sysconfig]# vi iptables

文件内容如下,注意红色一行是新加的,目的是对外界开放8080端口

# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT

这行文字实际是从上一行拷贝修改而来,在VI中拷贝一行用yy,拷贝多行用yyn,粘贴用p。还算方便的。

2.将iptables服务重启。

[root@bogon sysconfig]# service iptables restart
Flushing firewall rules:                                   [  OK  ]
Setting chains to policy ACCEPT: filter                    [  OK  ]
Unloading iptables modules:                                [  OK  ]
Applying iptables firewall rules:                          [  OK  ]
Loading additional iptables modules: ip_conntrack_ftp      [  OK  ]
[root@bogon sysconfig]#

然后从外界访问就可以了:

liunx机器开放8080端口_第1张图片

 

 

3.如若不想修改iptables表,可以直接输入下面命令:

iptables -I INPUT -p tcp --dport 80 -j ACCEPT

以上有问题请指出。

你可能感兴趣的:(liunx开放8080端口)