mysql数据库与win7兼容问题解决办法

  有的win7版本可以和mysql兼容，可以很容易安装上去。但有的版本不行。

  我之前的win7上装不了mysql5.0，但可以装上mysql5.1。但是我重装了新的win7之后就都装不上去了。我试了四五个版本，装了不下10次，但每一次都是最后一步卡住了。

  突然我想到了直接把安装好的mysql5.0的整个文件夹都拷过来，于是便开始动手试了试，三个小时后终于试验成功了。

  方法如下：

  下载一个安装好的mysql压缩包。

  首先找到my.ini，没有就建一个。做如下配置

[client]
#password   = your_password
port        = 3306
socket      = /tmp/mysql.sock

[WinMySQLadmin]

Server=C:/MySQL/MySQL_Server_5.0/bin/mysqld-nt.exe

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port        = 3306

#Path to installation directory. All paths are usually resolved relative to this.
basedir="C:/MySQL/MySQL_Server_5.0/"

#Path to the database root
datadir="C:/MySQL/MySQL_Server_5.0/data"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=utf8

socket      = /tmp/mysql.sock
skip-locking
key_buffer = 256M
max_allowed_packet = 1M
table_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 64M
#bdb_max_lock = 100000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/var/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/var/
#innodb_log_arch_dir = /usr/local/var/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

 

 

 其中有三个路径 是你把解压好的文件夹所放的路径，这个路径名中不能有空格。

your_password是你的用户密码，你可以填入你想要的密码，不用引号。

保存好之后到“运行”中去执行一条指令：C:/MySQL/MySQL_Server_5.0/bin/mysqld-nt.exe --install。注意换成你的目录。

这样就注册好了一个mysql服务。接下来就是启动服务：

新建一个文件：start_SQLServer.bat

内容如下

@ECHO OFF

if exist "%cd%\my.ini" goto startsrv
for /f %%i in ('net start') do if %%i==MySQL goto MySQL_IsRunning
 goto MySQL_NotRunning

:MySQL_IsRunning
 echo "found Server!"

深圳人才网 深圳招聘网 深圳人才招聘网 深圳人才大市场 

企业、个人免费注册，获取想要的 深圳 软件工程师招聘信息 月薪最低3000-8000，更有高端猎头职位！ 

www.szrcwz.com