A DBA’s take on MSCA (Mobile supply chain applications)

A DBA’s take on MSCA (Mobile supply chainapplications)

What is MSCA?

MSCA is Oracle’s take on mobile ERP. In manufacturing, having Oracle on a PC is sometimes inconvenient. Being able to process certain transactions where they actually happen is a huge win. So is being able to scan a barcode at this location, instead of typing in a long item number or purchase order number. Some common examples may be going out to the warehouse and counting inventory, transferring or issuing inventory, or even shipping and receiving. We use the LXE MX-7 as our mobile device; it’s basically a Windows CE device connected to our network via WiFi:

Architecture

Basically, MSCA is a telnet server running on the front end of 11i (possibly several servers load balanced by dispatchers), and either telnet or a little java GUI (on top of telnet) on the client side. As far as I can tell, it’s about as secure as an open barn door and in about the same technological era as the barn itself. In other words, it’s in dire need of a facelift, and a technology upgrade, but at least it works.

References

Oracle® Mobile Supply Chain Applications
Implementation Guide
Release 11i
Part No. B10938-02

Oracle® Mobile Supply Chain Applications
User’s Guide
Release 11i
Part No. A86726-06

Oracle® Mobile Application Server for Industrial Applications
Installation Guide
Release 1.0.8.2
May 2002

Oracle Mobile Applications
Graphical User Interface Client
An Oracle White Paper
February 2005

Starting/Stopping the Telnet Server

Of course, this assumes everything is configured reasonably well; in my case, autoconfig had already done all that work in $MWA_TOP as far as config files (with all the defaults). Where I have admin_user it means someone with the canned responsibility MWA Server Manager.

• Start
  • cd $MWA_TOP
  • ./mwactl.sh start
• Stop
  • cd $MWA_TOP
  • ./mwactl.sh -login admin_user/password stop_force

Logging In

The quickest way to do it is via telnet. Yep. From a command line in Windows, type telnet host portwhere host is where you just started the service from $MWA_TOP and port is one of the 3 ports it cranked up a telnet listener on. These ports are displayed when the mwactl.sh start command completes, and are in a config file called mwa.cfg in $MWA_TOP/secure.

Here’s some screenshots of the telnet version. I admit, my telnet client isn’t doing the application any favors, but then again, neither is the application.

Straight from 1973...

Yes the login screen CAN look worse

Actually, this may be an improvement from the responsibilities login page

Manufacturing Transactions

The admin menu

Telnet: Closing Thoughts

I don’t know who would choose to use telnet for this, or why, but it’s there, and it works. You have to use a bunch of crazy key combinations to do things (they’re listed in the user’s guide, like ctrl-Z to exit).

The GUI client

Jumping forward 20 years, we get to the java GUI client. Of course, Oracle only officially supports this running on Windows. Basically, you have to pull a patch (4205328) and extract 1 file from it (j4205328.zip) and land it in a directory on your Windows machine. After that, you install Sun/Oracle JDK and mock up a .cmd file to make the GUI launch. Fortunately, it also runs from Linux (Warning: You are now leaving the supported zone!) since it’s just a tiny java app sitting in front of the telnet screen and making the screen bearable.

“Installing” the GUI client

1. Create a folder somewhere on a Windows box called msca (or whatever you want to call it), then create 2 folders in it callled lib and log.
2. Install the most recent JDK wherever it installs itself. The docs say install 1.1.8, but I don’t think you’re allowed to download Java from 1999 anymore
3. Download the patch 4205328.zip; unzip it and extract the filej4205328.zip and put it in msca/lib
4. Create a command file called runMSCA.cmd and stick it in the msca directory. Edit it, and add these lines:

5. set MWA_GUI_TOP=C:\msca
   set JAVA_TOP="c:\Program Files\Java\jdk1.6.0_25"
   %JAVA_TOP%\bin\java -classpath %JAVA_TOP%\lib\classes.zip;%MWA_GUI_TOP%\lib\j4205328.zip oracle.apps.mwa.awt.client.StartGUI

Launching the GUI client

Double click the .cmd file and you get to the login. These screenshots are from Ubuntu, the Windows appearance is similar.

Pick your device

Login Screen

Responsibilities

Manufacturing Screen

Admin Screen

Warning!

This is not an implementation guide. It’s just a mid-depth technical introduction to this product. Functionally, best practices would be to get away from canned responsibilities and pare down transactions by job role. I do know that the few transactions we tested work fine. I’ve left out a lot of other things. There is a whole web-based interface which you can log into via conventional 11i to see who is using the server, whether the server is running or not, etc. I found it less than useful (and in some of what it reported, flat out wrong) so I didn’t go into detail here, but it exists and looks something like this:

Relevant Canned Responsibilities

If you just turn on telnet and try to log in, you will have 0responsibilities. Try giving yourself the following:

• MWA Administrator
• MWA Server Manager (needed to stop the telnet server!)
• Mobile Quality User
• Materials Management
• Materials & Mfg
• MWA WAP
• Mobile Field Sales User
• Mobile_Client_User

Shout and Spy Modes

This is one of the best parts about this product. From the admin menu, there’s 2 cool options which I’ve tested and work great:

• Telnet Session Monitor – lets you spy on a user (from a list of users logged in) and watch EXACTLY what they’re doing
• Send Message – broadcast a message to a user (from a list of users logged in) or to all users – it takes over their screen until they acknowledge it. Something like “System going down in 5 minutes” might be useful…

Using adstrtal.sh and adstpall.sh to start/stop the telnet server

This had the potential to be a disaster, but I was pleasantly surprised to find document731320.1which details a patch required and a context file tweak (s_mwastatusands_other_service_group_statusto enabled) which will then automatically start the service with all the other pieces on the front end.

Set Up Concurrent Request

If you’re using manufacturing, you should run the concurrent request Generate Stock Locator Flexfield definitions for Mobile transactions in order to set up your locators. Hat tip to the guys at Skipjack for that help; if you don’t do this, all your locators are X and nothing you enter is valid. I’m sure this is in one of the setup documents I mentioned, probably buried in the functional details. You can run this request as the canned responsibility Inventory.

Running the GUI from Linux

If anyone is interested in the setups required to launch the GUI from Linux, drop a comment. It’s really not that hard to figure out if you model it on the Windows requirements and adjust as necessary. In fact, if you have to ask, maybe you should just be running Windows…

source:http://kkempf.wordpress.com/2011/05/16/a-dbas-take-on-msca-mobile-supply-chain-applications/