create or replace package pack_materialUtils
is
--type materialRecordsType is table of eachMaterialRecord index by binary_integer;
--获得指定出库单包含的物资的名称
--molId：出库单id
--strlink:物资名称的连接符
function getNamesByMol(molId number) return varchar2;
function getNamesByMil(milId number) return varchar2;
function getMaterialSerialNumber(deptId varchar2) return varchar2;
function getPiciByMilSn(milsn varchar2) return varchar2;
function getPiciByMolSn(molsn varchar2) return varchar2;
function searchMaterial(materialName varchar2,
deptId varchar2,
storeType varchar2,
gridRibboncode varchar2,
materialType varchar2,
storeId varchar2)
return materialRecordsType;
end pack_materialUtils;
create or replace package body pack_materialUtils
is
--*******函数1***********
--取出库单物资的名称（拼接成字符串）
--Chency
--20130927
function getNamesByMol(molId number) return varchar2
is
resultNames varchar2(2000) := '';
tempName material.name%type;
cursor c_mo is select m.name from material m right join material_out mo on mo.material_id = m.id where mo.material_out_list_id = molId;
begin
open c_mo;
fetch c_mo into tempName;
while c_mo%found loop
resultNames := tempName || ',' || resultNames;
fetch c_mo into tempName;
end loop;
return resultNames;
close c_mo;
end;
--*******函数1***********
--取入库单物资的名称（拼接成字符串）
--Chency
--20130927
function getNamesByMil(milId number) return varchar2
is
resultNames varchar2(20000) := '';
tempName material.name%type;
cursor c_mi is select m.name from material m right join material_in mi on mi.material_id = m.id where mi.material_in_list_id = milId;
begin
open c_mi;
fetch c_mi into tempName;
while c_mi%found loop
resultNames := tempName || ',' || resultNames;
fetch c_mi into tempName;
end loop;
return resultNames;
close c_mi;
end;
/*
--/取得单位的出库单、入库单的流水号
说明：
1，流水号：形式20130912xxxxxMMMMMM，前面是年月日，中间xxxxx是部门的id后边是本田的第几个流水号5位数字组成
2，该函数每次调用都会返回当日最大的流水号，调用完之后更新最大流水号加一。
3，出库单，入库单的流水号是全市唯一的
*/
function getMaterialSerialNumber(deptId varchar2) return varchar2
is
v_realToday varchar2(20);
v_tempToday varchar2(20);
v_realMaxNumber int;
v_tempMaxNumber int;
v_tempId material_serial_number.id%type;
v_result varchar2(20);
cursor c is select today from material_serial_number where dept_id = deptId for update;
begin
select hibernate_sequence.nextval into v_tempId from dual;
select to_char(sysdate,'yyyymmdd') into v_realToday from dual;
-- select today from material_serial_number where dept_id = deptId;
open c;
fetch c into v_tempToday;
if c%FOUND THEN
select today into v_tempToday from material_serial_number where dept_id = deptId;
dbms_output.put_line('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
if v_realToday = v_tempToday then --如果序列表里有当前的记录
select maxNumber into v_realMaxNumber from material_serial_number where dept_id = deptId and today = v_realToday;
--生成流水号最后的序号
dbms_output.put_line('长度：' || lengthb(to_char(v_realMaxNumber)));
case lengthb(to_char(v_realMaxNumber))
when 1 then
v_result := v_realToday || to_char(deptId) || '0000' || to_char(v_realMaxNumber);
when 2 then
v_result := v_realToday || to_char(deptId) || '000' || to_char(v_realMaxNumber);
when 3 then
v_result := v_realToday || to_char(deptId) || '00' || to_char(v_realMaxNumber);
when 4 then
v_result := v_realToday || to_char(deptId)|| '0' || to_char(v_realMaxNumber);
else
v_result := v_realToday || to_char(deptId) || to_char(v_realMaxNumber);
end case;
--更新序列表
else
delete from material_serial_number where dept_id = deptId;
insert into material_serial_number values(v_tempId,0,v_realToday,1,deptId);
dbms_output.put_line('ccccccccccccccccccccccccccccccccccccccccccc');
v_result := v_realToday || to_char(deptId) || '00001';
end if;
else
insert into material_serial_number values(v_tempId,0,v_realToday,1,deptId);
dbms_output.put_line('ddddddddddddddddddddddddddddddddddddddddddddddddd');
v_result := v_realToday || to_char(deptId) || '00001';
end if;
update material_serial_number set maxnumber = maxnumber + 1 where dept_id = deptId;
commit;
return v_result;
end;
/*
根据入库单的流水号
*/
function getPiciByMilSn(milsn varchar2) return varchar2
is
v_count integer;
v_result varchar2(10);
begin
select count(*)+1 into v_count from material_in where mil_serial_number = milsn;
case lengthb(v_count)
when 1 then
v_result := '00'|| to_char(v_count);
when 2 then
v_result := '0'|| to_char(v_count);
when 3 then
v_result := to_char(v_count);
else
v_result := '批次达到最大数';
end case;
return v_result;
end;
--取得出库记录的批次
function getPiciByMolSn(molsn varchar2) return varchar2
is
v_count integer;
v_result varchar2(10);
begin
select count(*)+1 into v_count from material_out where mol_serial_number = molsn;
case lengthb(v_count)
when 1 then
v_result := '00'|| to_char(v_count);
when 2 then
v_result := '0'|| to_char(v_count);
when 3 then
v_result := to_char(v_count);
else
v_result := '批次达到最大数';
end case;
return v_result;
end;
--******************根据传递的参数查询库里的物资 **************************************
function searchMaterial(
materialName varchar2,
deptId varchar2,
storeType varchar2,
gridRibboncode varchar2,
materialType varchar2,
storeId varchar2)
return materialRecordsType
is
type ref_eachMaterialTotal is ref cursor; --声明游标变量类型
v_materialRecords materialRecordsType := materialRecordsType(); --定义存放结果集 表
v_cursor ref_eachMaterialTotal; --定义游标变量
v_cursorTemp ref_eachMaterialTotal; --定义暂时的游标变量
v_temp eachMaterialRecord; --测试变量
v_i int := 1;
begin
FOR emp_record IN ( select m.id,m.name materialName ,mi.totalnumber inputMaterialNumber,totalrealnumber remaindNumber,mi.totalPrice totalPrice from material m
join (select material_id, sum(material_mumber) totalnumber,sum(real_mumber) totalrealnumber, sum(price * real_mumber) totalPrice from material_in
where 1=1
and instr(decode(deptId, '', 'yes', dept_id,'yes'), 'y') > 0
and instr(decode(storeId, '', 'yes', store_id,'yes'), 'y') > 0
group by material_id)mi
on m.id = mi.material_id
where 1=1
and instr(decode(materialName, '', 'yes', m.name,'yes'), 'y') > 0
)
LOOP
v_materialRecords.extend();
v_materialRecords(v_materialRecords.count) := eachMaterialRecord(
emp_record.id,
emp_record.materialname,
emp_record.inputMaterialNumber,
emp_record.remaindNumber,
emp_record.totalPrice,
0,
0,
0,
0,
0,
0,
0,
0,
0);
BEGIN --获取物资的实物储备总数量、总库存、总金额
select mi.totalnumber inputMaterialNumberSw,totalrealnumber remaindNumberSw,mi.totalPrice totalPriceSw into
v_materialRecords(v_materialRecords.count).inputMaterialNumberSw, v_materialRecords(v_materialRecords.count).remaindNumberSw, v_materialRecords(v_materialRecords.count).totalPriceSw from material m
join (select material_id, sum(material_mumber) totalnumber,sum(real_mumber) totalrealnumber, sum(price * real_mumber) totalPrice from material_in
where material_id = emp_record.id
and store_type = '实物储备'
and instr(decode(deptId, '', 'yes', dept_id,'yes'), 'y') > 0
and instr(decode(storeId, '', 'yes', store_id,'yes'), 'y') > 0
group by material_id)mi
on m.id = mi.material_id
where 1=1
and instr(decode(materialName, '', 'yes', m.name,'yes'), 'y') > 0;
EXCEPTION
WHEN no_data_found THEN
null;
END;
BEGIN --获取物资的协议储备总数量、总库存、总金额
select mi.totalnumber inputMaterialNumberSw,totalrealnumber remaindNumberSw,mi.totalPrice totalPriceSw into
v_materialRecords(v_materialRecords.count).inputMaterialNumberXy, v_materialRecords(v_materialRecords.count).remaindNumberXy, v_materialRecords(v_materialRecords.count).totalPriceXy from material m
join (select material_id, sum(material_mumber) totalnumber,sum(real_mumber) totalrealnumber, sum(price * real_mumber) totalPrice from material_in
where material_id = emp_record.id
and store_type = '协议储备'
and instr(decode(deptId, '', 'yes', dept_id,'yes'), 'y') > 0
and instr(decode(storeId, '', 'yes', store_id,'yes'), 'y') > 0
group by material_id)mi
on m.id = mi.material_id
where 1=1
and instr(decode(materialName, '', 'yes', m.name,'yes'), 'y') > 0;
EXCEPTION
WHEN no_data_found THEN
null;
END;
BEGIN --获取物资的产能储备总数量、总库存、总金额
select mi.totalnumber inputMaterialNumberSw,totalrealnumber remaindNumberSw,mi.totalPrice totalPriceSw into
v_materialRecords(v_materialRecords.count).inputMaterialNumberCn, v_materialRecords(v_materialRecords.count).remaindNumberCn, v_materialRecords(v_materialRecords.count).totalPriceCn from material m
join (select material_id, sum(material_mumber) totalnumber,sum(real_mumber) totalrealnumber, sum(price * real_mumber) totalPrice from material_in
where material_id = emp_record.id
and store_type = '产能储备'
and instr(decode(deptId, '', 'yes', dept_id,'yes'), 'y') > 0
and instr(decode(storeId, '', 'yes', store_id,'yes'), 'y') > 0
group by material_id)mi
on m.id = mi.material_id
where 1=1
and instr(decode(materialName, '', 'yes', m.name,'yes'), 'y') > 0;
EXCEPTION
WHEN no_data_found THEN
null;
END;
v_i := v_i + 1;
END LOOP;
dbms_output.put_line('集合的长度为：'|| v_materialRecords.count);
/*
if v_materialRecords.count > 0 then
for v_count in v_materialRecords.first..v_materialRecords.last loop
dbms_output.put_line(v_materialRecords(v_count).id || ' ' ||
v_materialRecords(v_count).materialname || ' ' ||
v_materialRecords(v_count).inputMaterialNumber || ' ' ||
v_materialRecords(v_count).remaindnumber || ' ' ||
v_materialRecords(v_count).totalprice || ' ' ||
v_materialRecords(v_count).inputMaterialNumberSw || ' ' ||
v_materialRecords(v_count).remaindNumberSw || ' ' ||
v_materialRecords(v_count).totalPriceSw || ' ' ||
v_materialRecords(v_count).inputMaterialNumberXy || ' ' ||
v_materialRecords(v_count).remaindNumberXy || ' ' ||
v_materialRecords(v_count).totalPriceXy || ' ' ||
v_materialRecords(v_count).inputMaterialNumberCn || ' ' ||
v_materialRecords(v_count).remaindNumberCn || ' ' ||
v_materialRecords(v_count).totalPriceCn
);
end loop;
end if;
*/
return v_materialRecords;
end;
end pack_materialUtils;
