Cisco EMM

Embedded Event Manager Overview

http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_overview_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1070244

 

如果想让结果直接显示:----------需要用到一个变量"_cli_result"

event manager applet ciscoEEM1
 event none
 action 0.9 cli command "enable"
 action 1.0 cli command "show ip route connected"
 action 1.1 puts "$_cli_result"

 

command in the $_cli_result variable.
    * Similar to the Tcl EEM policies, the puts command writes the text

to the current line (console or VTY session) if the EEM applet executes

within the context of a line (for example, when started with the event

manager run command). Otherwise, its output is sent to the logging

subsystem.

====================

下面是常用的built-in variable :

action cli :$_cli_result
The result of the execution of the CLI command.

action counter:$_counter_value_remain 
The value of the counter after the execution of the action counter