通过SCCM部署系统时遇到错误0x80070032

今天同事的电脑出了问题,之前他装了Linux及Win7的双系统,后来不小心把启动分区弄坏了,没办法修复,因此就只好重装了,但是重装的过程中,引导完之后老是出现错误提示:Task Sequence:

Windows 7x64 Wipe/Image - CN has failed with the server code (0x800700A1). For more information please contact your system administrator or helpdesk operator.  

我估计是分区表被破坏了,然后用了一堆分区软件才把这个修复好,因为硬盘空间太大了,320G,很多旧的分区软件不支持,用PM的话无法读取,显示错误,很多奇怪的问题。所以最后结合了好几个软件才把这个问题解决了,先用DISKGEN删除了所有分区,然后用DM重建分区,由于这个是N老的软件,建分区时每个才2点几G,自动建立近10个,然后用PM终于可以识别了,删除了所有分区,重新建立了两个分区,在DOS下测试可以检测得到。然后用SCCM启动盘引导开始装系统,可是在装系统那步有出现了问题,提示0x80070032的错误,在内部trouble ticket系统里面搜索得到如下提示:

error code: 0x800700A1, 0x80070032, and 0x80070490
"The specified path is invalid" or "Unable to find a partition on the system disk that can be set as active".
We get this error message typically right after the Computername step. This is always a partitioning failure and is fixed by manually diskparting the machine . Typically this occurs with machines that were previously linux. Please note that we do not buy windows licenses for these linux machines so they typically should not be imaged with Windows per compliance.

然后按照提示,尝试用DISKPART命令修复:

Diskpart is the Disk Partitioning/Formatting command line utility for Windows.
 
To easily access it, use a winpe boot disk/Amazon boot key/cd (hit f8 during the SCCM image wizard) command window and enter the following:
 
DISKPART
 
This will get you another prompt that looks like DISKPART>

   1. list disk - this will show the known drives on your PC.
   2. select disk <#> Choose the hard drive and not your boot device ;)
   3. clean
   4. create partition primary
   5. select partition 1
   6. active
   7. format fs=ntfs quick
   8. assign
   9. exit 

完成后再继续灌系统,总算成功了。

你可能感兴趣的:(职场,休闲,SCCM,部署系统,0x80070032)