Installing ffmpeg from command line with h264 (AVC) and mp3
http://hi.baidu.com/liberum/blog/item/4c2f4793aa8df17d55fb96ef.html
不少资料和编译版本都比较旧，这个还算比较靠谱的
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Installing ffmpeg from command line with h264 (AVC) and mp3
2010-11-23 17:09
Posted on September 23, 2010 by Breedt Didier
Step by step guide on installing the following ffmpeg installation:
configuration: –enable-libmp3lame
–enable-libvorbis –enable-libxvid –enable-gpl –enable-shared –enable-version3 –enable-nonfree –enable-pthreads –enable-libfaac –enable-libfaad –enable-libopencore-amrnb –enable-libopencore-amrwb –enable-libtheora –enable-libx264 –enable-libxvid –enable-x11grab
I would advise you to fetch all the following files inside a single directory. What I usually do, which has been working for me quite well, is I would start with fetching the ffmpeg installation and immediately start the above configure command, then as it fails due to dependiencies, I just install them one by one. I will now log the entire install here for you to grab a read and perhaps try yourself.
export TMPDIR={ffmpeg_install}/tmp
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR yasm not found
cd ..
wget http://www.tortall.net/projects/yasm/releases/yasm-1.1.0.tar.gz
tar -xf yasm-1.1.0.tar.gz
cd yasm-1.1.0
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libfaac not found
cd ..
wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz
tar -xf faac-1.28.tar.gz
cd faac-1.28
./configure
make && make install cleancd
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libmp3lame >= 3.98.3 not found
cd ..
wget http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz?r=http://sourceforge.net/projects/lame/files/lame/&ts=1285256527&use_mirror=ufpr
tar -xf lame-3.98.4.tar
cd lame-3.98.4
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libopencore_amrnb not found
cd ..
wget http://downloads.sourceforge.net/project/opencore-amr/opencore-amr/0.1.2/opencore-amr-0.1.2.tar.gz?r=http://sourceforge.net/projects/opencore-amr/&ts=1285256783&use_mirror=ufpr
tar -xf opencore-amr-0.1.2.tar.gz
cd opencore-amr-0.1.2
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libtheora not found
cd ..
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
tar -xf libtheora-1.1.1.tar.bz2
cd libtheora-1.1.1
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libx264 not found
cd ..
wget ftp://ftp.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-20100922-2245.tar.bz2
tar -xf x264-snapshot-20100922-2245.tar.bz2
cd x264-snapshot-20100922-2245
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
ERROR: libxvid not found
cd ..
wget http://downloads.xvid.org/downloads/xvidcore-1.2.2.tar.gz
tar -xf xvidcore-1.2.2.tar.gz
cd xvidcore/build/generic
./configure
make && make install clean
cd ..
cd ffmpeg-checkout-2010-09-23
./configure --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-gpl --enable-shared --enable-version3 --enable-nonfree --enable-pthreads --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libx264 --enable-libxvid --enable-x11grab
Depending on your system, you may need to update your GNU make as well if you get this error:
common.mak:28: *** unterminated call to function `foreach': missing `)'. Stop.
cd ..
wget http://ftp.gnu.org/gnu/make/make-3.82.tar.gz
tar -xf make-3.82.tar.gz
cd make-3.82.tar
./configure
make && make install clean
bash -l
cd ..
cd ffmpeg-checkout-2010-09-23
make && make install clean
ldconfig
bash -l