RIPv2验证
在R1,R2上进行配置
R1
conf t
int l 0
ip ad 4.4.4.4 255.255.255.255
int s 0
ip ad 10.1.1.1 255.255.255.0
clock rate 64000
ip rip authentication key-chain RIP_authen 在接口上进行验证
ip rip authentication mode md5 定义验证方法(md5/text)
no shut
exit
key chain RIP_authen 定义key chain的名字
key 1 定义key的标识符
key-string pass 定义验证码
router rip
ver 2
no au
net 4.0.0.0
net 10.0.0.0
R2
conf t
int l 0
ip ad 5.5.5.5 255.255.255.255
int s0
ip ad 10.1.1.2 255.255.255.0
no shut
ip authentication key-chain RIP_authen
ip authentication mode md5
exit
key chain RIP_authen
key 1
key-string pass
router rip
ver 2
no au
net 10.0.0.0
net 5.0.0.0
exit
R1#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
4.0.0.0/32 is subnetted, 1 subnets
C 4.4.4.4 is directly connected, Loopback0
5.0.0.0/32 is subnetted, 1 subnets
R 5.5.5.5 [120/1] via 10.1.1.2, 00:00:03, Serial0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial0
r2#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
4.0.0.0/32 is subnetted, 1 subnets
R 4.4.4.4 [120/1] via 10.1.1.1, 00:00:16, Serial0
5.0.0.0/32 is subnetted, 1 subnets
C 5.5.5.5 is directly connected, Loopback0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial0
R1#ping 5.5.5.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 5.5.5.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms
r2#ping 4.4.4.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.4.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/61/64 ms
本文出自 “穿过地狱去看海” 博客,谢绝转载!