MS UC 2013-2-Deploy Microsoft Exchange Server 2013-3-Install
Blog:http://dynamic.blog.51cto.com MSN:[email protected] QQ:316190099
《MS UC 2013 -系列》博文：
1） 以TechNet Library为技术资料原型。
2） 以0-《统一沟通-微软-实战》为基础。
3） 以1-《统一沟通-微软-技巧》为参照。
4） 以整个测试过程中图片为样板，再次标准化了操作流程，你看多了就会知道。
5） 不论你喜欢与不喜欢?
6） 不论你说啥!
7） 它都出现了!...它也将在你想不到的时间消失，因为有更好计划在实施中。
8） 目的:为了让大家更容易看懂TechNet Library，更容易看懂微软！
1. DC.uc-cn.net
1.1. DC.DNS.ADCS- 准备工作
1) 操作系统
Windows Server 2008 R2 With SP1
2) 计算机名
DC.uc-cn.net
3) IP
10.112.1.1
255.255.255.0
10.112.1.254
10.112.1.1
1.2. DC.DNS.ADCS-部署
2. Sql.uc-cn.net
2.1. Sql Server 2008 R2 With SP1-准备工作
1) 操作系统
Windows Server 2008 R2 With SP1
2) 计算机名
Sql.uc-cn.net
3) IP
10.112.1.2
255.255.255.0
10.112.1.254
10.112.1.1
2.2. Sql Server 2008 R2 With SP1-部署
1) 操作系统
Windows Server 2008 R2 With SP1
2) 计算机名
Sql.uc-cn.net
3) IP
10.112.1.2
255.255.255.0
10.112.1.254
10.112.1.1
3. WebApps-2013 .uc-cn.net
3.1. WebApps-2013-准备工作
1) 操作系统
Windows Server 2008 R2 With SP1
2) 计算机名
WebApps-2013.uc-cn.net
3) IP
10.112.1.3
255.255.255.0
10.112.1.254
10.112.1.1
3.2. WebApps-2013-部署
4. Exchange-2013.uc-cn.net
4.1. Exchange Server 2013-准备工作
1) 操作系统
Windows Server 2008 R2 With SP1
2) 计算机名
Exchange-2013.uc-cn.net
3) IP
10.112.1.4
255.255.255.0
10.112.1.254
10.112.1.1
4.2. Exchange Server 2013-部署
1) Microsoft Exchange Server 2013 Preview
http://technet.microsoft.com/zh-cn/evalcenter/hh973395
http://technet.microsoft.com/en-us/library/bb124558(v=exchg.150)
2) Exchange 2013 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150)
Active Directory preparation
备注:这可以不做，2-Prepare Active Directory and Domains-已操作！
The computer you want to use to prepare Active Directory for Exchange 2013 Preview has specific prerequisites that must be met.
Install the following software on the computer that will be used to prepare Active Directory:
・ Microsoft .NET Framework 4.5
・ Windows Management Framework 3.0
Note:
|
|
.NET Framework 4.5 and Windows Management Framework 3.0 are included with Windows Server 2012 and don't need to be installed separately.
|
After you've installed the software listed above, complete the following steps to install the Remote Tools Administration Pack. After you've installed the Remote Tools Administration Pack you'll be able to use the computer to prepare Active Directory. For more information about preparing Active Directory, see Prepare Active Directory and Domains .
1. Open Windows PowerShell.
2. Install the Remote Tools Administration Pack.
o On a Windows Server 2012 computer, run the following command.
Copy
Install-WindowsFeature RSAT-ADDS
o On a Windows Server 2008 R2 SP1 computer, run the following command.
Copy
Import-Module ServerManager
Add-WindowsFeature RSAT-ADDS
Windows Server 2012 prerequisites
参照:
Windows Server 2008 R2 SP1 prerequisites
参照:
Windows Server 2008 R2 SP1 prerequisites.docx
3)
4.3. Install Exchange Server 2013
Install Exchange Server 2013
If you're installing the first Exchange 2013 Preview server in the organization, and the Active Directory preparation steps have not been performed, the account you use must have membership in the Enterprise Administrators group. If you haven't previously prepared the Active Directory Schema, the account must also be a member of the Schema Admins group. For information about preparing Active Directory for Exchange 2013 Preview, see Prepare Active Directory and Domains . If you have already performed the Schema and Active Directory preparation steps, the account you use must be a member of the Delegated Setup management role group or the Organization Management role group.
Download Exchange 2013 Setup from the Below link
Download Microsoft Exchange Server 2013 Preview
1. Start Exchange 2013 Preview Setup by double-clicking
Setup.exe
Important:
|
|
If you have User Access Control (UAC) enabled, you must right-click
Setup.exe and select
Run as administrator.
|
2. On the
Check for Updates page, choose whether you want Setup to connect to the Internet and download product and security updates for Exchange 2013 Preview. If you select
Connect to the Internet and check for updates, Setup will download updates and apply them prior to continuing. If you select
Don't check for updates right now, you can download and install updates manually later. We recommend that you download and install updates now. Click
next to continue.
3. On the
Copying File page, Setup copies files required for setup. When Setup is finished copying files and is ready to begin, click
next.
4. The
Introduction page begins the process of installing Exchange into your organization. It will guide you through the installation. Several links to helpful deployment content are listed. We recommend that you visit these links prior to continuing setup. Click
next to continue.
5. On the
License Agreement page, review the software license terms. If you agree to the terms, select
I accept the terms in the license agreement, and then click
next.
6. On the
Error Reporting page, select whether you want to enable or disable the Exchange Error Reporting feature, and then click
next.
7. On the
Checking Required Software page, Setup makes sure that you've installed the software required for setup to run. If any applications are listed, install them and then run Setup again. If all required software is found, click
next to continue.
8. On the
Server Role Selection page, choose whether you want to install the
Mailbox role, the
Client Access role, both roles, or just the
Management Tools on this computer. You can add additional server roles later if you choose not to install them during this installation. An organization must have at least one Mailbox role and at least one Client Access server role installed. They can be installed on the same computer or on separate computers. The management tools are installed automatically if you install any other server role. After you've made your selection, click
next to continue.
9. On the
Installation Space and Location page, either accept the default installation location or click
Browse to choose a new location. Make sure that you have enough disk space available in the location where you want to install Exchange. Click
next to continue.
10. If this is the first Exchange server in your organization, on the
Exchange Organization page, type a name for your Exchange organization. The Exchange organization name can contain only the following characters:
o A through Z
o a through z
o 0 through 9
o Space (not leading or trailing)
o Hyphen or dash
![clip_image001[1]](http://img1.51cto.com/attachment/201211/27/711418_1354020818ep6i.gif "clip_image001[1]"){kind=small}
Note:
|
|
The organization name can't contain more than 64 characters. The organization name can't be blank.
|
11. If you want to use the Active Directory split permissions model, select
Apply Active Directory split permission security model to the Exchange organization.
Caution:
|
|
Most organizations don't need to apply the Active Directory split permissions model. If you need to separate management of Active Directory security principals and Exchange configuration, Role Based Access Control (RBAC) split permissions might work for you. For more information, click
?.
|
12. Click
next to continue.
13. If you're installing the Mailbox role, on the
Malware Protection Settings page, choose whether you want to enable or disable malware scanning. If you disable malware scanning, it can be enabled in the future. Click
next to continue.
14. If you're installing the Client Access server role, on the
Configure Client Access Server external domain page, click
This Client Access server will be Internet-facing if the Client Access server you're installing will be accessible from the Internet. Then, enter a domain name to use to configure your Client Access servers.
![clip_image001[2]](http://img1.51cto.com/attachment/201211/27/711418_1354020820h7He.gif "clip_image001[2]"){kind=small}
Note:
|
|
If the Client Access server won't be Internet-facing, you can click
next without configuring a domain name.
|
15. Click
next to continue.
16. On the
Customer Experience Improvement Program page, choose the appropriate selections for your organization, and then click
next to continue.
17. On the
Readiness Checks page, view the status to determine if the organization and server role prerequisite checks completed successfully. If they haven't completed successfully, you must resolve any reported errors before you can install Exchange 2013 Preview. You don't need to exit Setup when resolving some of the prerequisite errors. After resolving a reported error, click
back and then click
next to run the prerequisite check again. Be sure to also review any warnings that are reported. If all readiness checks have completed successfully, click
next to install Exchange 2013 Preview.
************************************************************************************************
![clip_image001[3]](http://img1.51cto.com/attachment/201211/27/711418_1354020828ESBF.gif "clip_image001[3]"){kind=small}
Note:
************************************************************************************************
18. On the
Completion page, click
Finish.
19. Restart the computer after Exchange 2013 Preview has completed.
20. Complete your deployment by performing the tasks provided in Exchange 2013 Post-Installation Tasks .
Exchange 2013 Post-Installation Tasks
http://technet.microsoft.com/en-us/library/bb124397(v=exchg.150)
Open the (EAC) by browsing to https://
<fully qualified domain name (FQDN) of Client Access server>/ECP.
https://Exchange-2013.uc-cn.net/ECP
Enter your username and password in
Domain\user name and
Password and then click
sign in.
