从头搭建drbd+openfiler+corosync （二）

3. 开始搭建corosync

3.1 Create Corosync authkey创建双方的认证

root@filer01~# corosync-keygen   执行之后等待他的输出，一直到结束！

( Press the real keyboard instead of pressing keys in an ssh terminal. )

Copy the authkey file to the other node and change the fileaccess:

root@filer01~# scp /etc/corosync/authkey root@filer02:/etc/corosync/authkey
root@filer02~# chmod 400 /etc/corosync/authkey

 

3.2 创建 pcmk /etc/corosync/service.d/pcmk

root@filer01~# vi /etc/corosync/service.d/pcmk

service {
        # Load the Pacemaker Cluster Resource Manager
        name: pacemaker
        ver:  0
 }

 

3.2.1 拷贝到filer02上面

root@filer01~# scp /etc/corosync/service.d/pcmk root@filer02:/etc/corosync/service.d/pcmk

 

3.3 Create the corosync.conf file and change it to present your lan net ( bindnetaddr )

[root@filer01 ~]# cat /etc/corosync/corosync.conf

# Please read the corosync.conf.5 manual page

compatibility: whitetank

totem {

        version: 2

        secauth: off

        threads: 0

        interface {

                ringnumber: 0

                bindnetaddr: 192.168.11.0  （心跳线的广播域）

                mcastaddr: 226.94.8.8   （组播地址 选取这个段的）

                mcastport: 5405

                ttl: 1

        }

}

logging {

        fileline: off

        to_stderr: no

        to_logfile: yes

        to_syslog: yes

        logfile: /var/log/cluster/corosync.log

        debug: off

        timestamp: on

        logger_subsys {

                subsys: AMF

                debug: off

        }

}

amf {

        mode: disabled

}

 

3.3.1 拷贝一份到filer02

root@filer01~# scp /etc/corosync/corosync.conf root@filer02:/etc/corosync/corosync.conf

4.准备corosync配置

首先，我们准备重启机器，然后把以下的服务停掉随机启动，因为我们需要用corosync来控制他们

root@filer01~# chkconfig --level 2345 openfiler off
root@filer01~# chkconfig --level 2345 nfslock off
root@filer01~# chkconfig --level 2345 corosync on

俩个节点都要执行  :

root@filer02~# chkconfig --level 2345 openfiler off
root@filer02~# chkconfig --level 2345 nfslock off
root@filer02~# chkconfig --level 2345 corosync on

然后重启机器，等待....

 

4.1 Check if corosync started properly查看corosync是否启动正常

root@filer01~# ps auxf

root@filer01~# ps auxf
root      3480  0.0  0.8 534456  4112 ?        Ssl  19:15   0:00 corosync
root      3486  0.0  0.5  68172  2776 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/stonith
106       3487  0.0  1.0  67684  4956 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/cib
root      3488  0.0  0.4  70828  2196 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/lrmd
106       3489  0.0  0.6  68536  3096 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/attrd
106       3490  0.0  0.6  69064  3420 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/pengine
106       3491  0.0  0.7  76764  3488 ?        S    19:15   0:00  \_ /usr/lib64/heartbeat/crmd

root@filer02~# crm_mon --one-shot -V

crm_mon[3602]: 2011/03/24_19:32:07 ERROR: unpack_resources: Resource start-up disabled since no STONITH resources have been defined
crm_mon[3602]: 2011/03/24_19:32:07 ERROR: unpack_resources: Either configure some or disable STONITH with the stonith-enabled option
crm_mon[3602]: 2011/03/24_19:32:07 ERROR: unpack_resources: NOTE: Clusters with shared data need STONITH to ensure data integrity
============
Last updated: Thu Mar 24 19:32:07 2011
Stack: openais
Current DC: filer01 - partition with quorum
Version: 1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b
2 Nodes configured, 2 expected votes
0 Resources configured.
============

Online: [ filer01 filer02 ]

 

4.2 Configure Corosync as following配置corosync

Now before do monitor the status of starting the cluster on filer02:

root@filer02~# crm_mon

 

4.2.1 Howto configure corosync step by step

root@filer01~# crm configure

crm(live)configure# property stonith-enabled="false"

crm(live)configure# property no-quorum-policy="ignore"

crm(live)configure# rsc_defaults $id="rsc-options" resource-stickiness="100" 

crm(live)configure# primitive ClusterIP ocf:heartbeat:IPaddr2 params ip="192.168.10.248" （虚拟ＩＰ地址）cidr_netmask="24" op monitor interval="30s"

crm(live)configure# primitive MetaFS ocf:heartbeat:Filesystem  params device="/dev/drbd0" directory="/meta" fstype="ext3"

#crm(live)configure# primitive lvmdata ocf:heartbeat:LVM  params volgrpname="data"

crm(live)configure# primitive drbd_meta ocf:linbit:drbd params drbd_resource="meta"  op monitor interval="15s"

crm(live)configure# primitive drbd_data ocf:linbit:drbd  params drbd_resource="data"  op monitor interval="15s"

crm(live)configure# primitive openfiler lsb:openfiler

crm(live)configure# primitive iscsi lsb:iscsi-target

#crm(live)configure# primitive samba lsb:smb

#crm(live)configure# primitive nfs lsb:nfs

#crm(live)configure# primitive nfslock lsb:nfslock

crm(live)configure# group g_drbd drbd_meta drbd_data

crm(live)configure# group g_services MetaFS lvmdata openfiler ClusterIP iscsi samba nfs nfs-lock

crm(live)configure# ms ms_g_drbd g_drbd  meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"

crm(live)configure# colocation c_g_services_on_g_drbd inf: g_services ms_g_drbd:Master

crm(live)configure# order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start

crm(live)configure# commit

Watch now on the monitor process how the resources all start hopefully.

root@filer01 ~# crm_mon

以上会有warn提示，但是不是报错，没有关系 

4.2.2 Troubleshooting

If you get any errors because you done commit before the end of the config, then you need to do a cleanup, as in this example:

root@filer01~# crm
crm(live)resource cleanup MetaFS

 

4.2.3 Verify the config

验证你的配置信息，通过输入

[root@filer01 ~]# crm configure show

node filer01

node filer02

primitive ClusterIP ocf:heartbeat:IPaddr2 \

params ip="192.168.10.248" cidr_netmask="24" \

op monitor interval="30s"

primitive MetaFS ocf:heartbeat:Filesystem \

params device="/dev/drbd0" directory="/meta" fstype="ext3"

primitive drbd_data ocf:linbit:drbd \

params drbd_resource="data" \

op monitor interval="15s"

primitive drbd_meta ocf:linbit:drbd \

params drbd_resource="meta" \

op monitor interval="15s"

primitive iscsi lsb:iscsi-target

primitive lvmdata ocf:heartbeat:LVM \

params volgrpname="data"

primitive nfs lsb:nfs

primitive nfslock lsb:nfslock

primitive openfiler lsb:openfiler

primitive samba lsb:smb

group g_drbd drbd_meta drbd_data

group g_services MetaFS lvmdata openfiler ClusterIP iscsi samba nfs nfslock

ms ms_g_drbd g_drbd \

meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"

colocation c_g_services_on_g_drbd inf: g_services ms_g_drbd:Master

order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start

property $id="cib-bootstrap-options" \

dc-version="1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b" \

cluster-infrastructure="openais" \

expected-quorum-votes="2" \

stonith-enabled="false" \

no-quorum-policy="ignore"

rsc_defaults $id="rsc-options" \

resource-stickiness="100"

然后你可以通过输入

crm_mon来查看状态。服务是不是正常启动

Last updated: Mon Dec 17 10:40:54 2012

Stack: openais

Current DC: filer01 - partition with quorum

Version: 1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b

4 Nodes configured, 2 expected votes

2 Resources configured.

============

Online: [ filer01 filer02 ]

 Resource Group: g_services

     MetaFS     (ocf::heartbeat:Filesystem):    Started filer01

     lvmdata    (ocf::heartbeat:LVM):              Started filer01

     openfiler  (lsb:openfiler):                          Started filer01

     ClusterIP  (ocf::heartbeat:IPaddr2):         Started filer01

     iscsi      (lsb:iscsi-target):                           Started filer01

     samba      (lsb:smb):                                   Started filer01

     nfs        (lsb:nfs):                                          Started filer01

     nfslock    (lsb:nfslock):                                Started filer01

     Master/Slave Set: ms_g_drbd

     Masters: [ filer01 ]

     Slaves: [ filer02 ]