fadf

查看以太网接口信息，在7507上使用命令为：  show interfaces fastethernet [slot/port-adapter/port]
查看POS接口信息，在7507上使用命令为：   show interfaces pos [slot/port-adapter/port]

1、下例给出了在7507上查看第1槽位上第1个PA上的第1个快速以太网接口的接口配置信息：

Router# show interfaces fastethernet 1/0/0

Fast Ethernet1/0/0 is up, line protocol is up
  Hardware is TSWITCH, address is 00e0.f7a4.5130 (bia 00e0.f7a4.5130)
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
  Encapsulation ARPA, loopback not set, keepalive set (10 sec)
  Half-duplex, 100BaseTX
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:05:30, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Queueing strategy: fifo
  Output queue 0/40, 0 drops; input queue 0/75, 0 drops
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     312 packets input, 18370 bytes, 0 no buffer
     Received 216 broadcasts, 0 runts, 0 giants, 0 throttles
     3 input errors, 0 CRC, 0 frame, 0 overrun, 3 ignored, 0 abort
     0 input packets with dribble condition detected
     15490 packets output, 1555780 bytes, 0 underruns
     2 output errors, 0 collisions, 2 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
2 output buffer failures, 0 output buffers swapped out