Centreon 2.4.4官方安装转载
Using sources
Prerequisites
CentOS
In CentOS and RHEL5, following packages are not included in standard repositories. To install pre-requisites, you need to addRPM Forgerepository.
On 32-bits:
$ wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
$ wget http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
On 64-bits:
$ wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
$ wget http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
Use your favourite editor to openRPM-GPG-KEY.dag.txt, and remove the first few lines. The file should start with:
"-----BEGIN PGP PUBLIC KEY BLOCK-----"
Then, execute the following:
$ rpm --import RPM-GPG-KEY.dag.txt
$ rpm -Uvh rpmforge-release-0.5.1-1.el5.rf.i386.rpm
Now, you’re ready to install the prerequisites:
$ yum update
$ yum upgrade
$ yum install httpd gd fontconfig-devel libjpeg-devel libpng-devel gd-devel perl-GD \
openssl-devel perl-DBD-MySQL mysql-server mysql-devel php php-mysql php-gd php-ldap php-xml php-mbstring \
perl-Config-IniFiles perl-DBI perl-DBD-MySQL rrdtool perl-rrdtool perl-Crypt-DES perl-Digest-SHA1 \
perl-Digest-HMAC net-snmp-utils perl-Socket6 perl-IO-Socket-INET6 net-snmp net-snmp-libs php-snmp \
dmidecode lm_sensors perl-Net-SNMP net-snmp-perl fping cpp gcc gcc-c++ libstdc++ glib2-devel \
php-pear
Additionnal commands are required to configure the environment properly:
$ usermod -U apache
$ pear channel-update pear.php.net
If you can’t access the Internet directly but throught a proxy, run the following:
$ pear config-set http_proxy http://my_proxy.com:port
And finally:
$ pear upgrade-all
Debian / Ubuntu
Install the following prerequisites:
$ apt-get install sudo tofrodos bsd-mailx lsb-release mysql-server libmysqlclient15-dev \
apache2 apache2-mpm-prefork php5 php5-mysql php-pear php5-ldap php5-snmp php5-gd \
rrdtool librrds-perl libconfig-inifiles-perl libcrypt-des-perl libdigest-hmac-perl \
libdigest-sha1-perl libgd-gd2-perl snmp snmpd libnet-snmp-perl libsnmp-perl
To finish, you must install SNMP mibs. Due to a licensing issue, those mibs are not available by default on Debian. To add them, first edit the/etc/apt/sources.listfile and add thenon-freecategory.
Then, run the following commands:
$ apt-get update
$ apt-get install snmp-mibs-downloader
Suse
Packages
Install the following prerequisites:
$ yast -i gcc gcc-c++ make automake apache2 php5 php5-mysql apache2-mod_php5 php5-pear \
php5-ldap php5-snmp php5-gd php5-soap php5-posix php5-gettext php5-mbstring mysql \
libmysqlclient-devel perl-DBD-mysql mysql-community-server rrdtool perl-Config-IniFiles \
net-snmp perl-Net-SNMP perl-SNMP gd libjpeg-devel libpng-devel fontconfig-devel \
freetype2-devel sudo mailx fping iputils dos2unix cron dejavu
Configuring MIME types
On some OpenSuse distributions, the default mime types are not properly configured to work with the Centreon user interface. Edit the/etc/mime.typesfile and look for the lines:
text/x-xsl xsl
text/x-xslt xslt xsl
Replace them with the following:
text/xml xsl
text/xml xslt xsl
Save the file and restart apache:
/etc/init.d/apache2 restart
Monitoring engine
Centreon is compatible with the following monitoring engines:
Centreon Engine
Nagios
Icinga
Install one of these engines before going futher and make sure to install theNagios plugins.
Broker module
Centreon is compatible with the following broker modules:
Centreon Broker
NDOUtils
Install one of these broker modules before going further.
Centreon
Download the newest Centreon packagehere.
Shell Installation
Extract the Centreon package:
tar zxf centreon-2.x.x.tar.gz
Change directory:
cd centreon-2.x.x
Run the installation script:
./install.sh -i
The installation script allows custom configuration, this procedure will show you the best paths to use. Also, the Yes/No prompt questions will result in [y] answers most of the time.
Prerequisites check
If [Step 01] is successful, you should not have any problem here. Otherwise, go back to [Step 01] and install the prerequisites:
###############################################################################
# #
# Centreon (www.centreon.com) #
# Thanks for using Centreon #
# #
# v2.4.0 #
# #
# [email protected] #
# #
# Make sure you have installed and configured #
# sudo - sed - php - apache - rrdtool - mysql #
# #
###############################################################################
------------------------------------------------------------------------
Checking all needed binaries
------------------------------------------------------------------------
rm OK
cp OK
mv OK
/bin/chmod OK
/bin/chown OK
echo OK
more OK
mkdir OK
find OK
/bin/grep OK
/bin/cat OK
/bin/sed OK
License agreement
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
Do you accept GPL license ?
[y/n], default to [n]:
> y
Main components
Answer [y] to all
------------------------------------------------------------------------
Please choose what you want to install
------------------------------------------------------------------------
Do you want to install : Centreon Web Front
[y/n], default to [n]:
> y
Do you want to install : Centreon CentCore
[y/n], default to [n]:
> y
Do you want to install : Centreon Nagios Plugins
[y/n], default to [n]:
> y
Do you want to install : Centreon Snmp Traps process
[y/n], default to [n]:
> y
Installation paths
------------------------------------------------------------------------
Start CentWeb Installation
------------------------------------------------------------------------
Where is your Centreon directory?
default to [/usr/local/centreon]
> /usr/share/centreon
Do you want me to create this directory ? [/usr/share/centreon]
[y/n], default to [n]:
> y
Path /usr/share/centreon OK
Where is your Centreon log directory
default to [/usr/local/centreon/log/]
> /var/log/centreon
Do you want me to create this directory ? [/var/log/centreon/]
[y/n], default to [n]:
> y
Path /var/log/centreon/ OK
Where is your Centreon etc directory
default to [/etc/centreon]
>
Do you want me to create this directory ? [/etc/centreon]
[y/n], default to [n]:
> y
Path /etc/centreon OK
Where is your Centreon binaries directory
default to [/usr/local/centreon/bin]
> /usr/share/centreon/bin
Do you want me to create this directory ? [/usr/share/centreon/bin]
[y/n], default to [n]:
> y
Path /usr/share/centreon/bin OK
Where is your Centreon data information directory
default to [/usr/local/centreon/data]
> /usr/share/centreon/data
Do you want me to create this directory ? [/usr/share/centreon/data]
[y/n], default to [n]:
> y
Where is your Centreon generation_files directory?
default to [/usr/local/centreon/]
> /usr/share/centreon
Path /usr/share/centreon/ OK
Where is your Centreon variable library directory?
default to [/var/lib/centreon]
>
Do you want me to create this directory ? [/var/lib/centreon]
[y/n], default to [n]:
> y
Path /var/lib/centreon OK
Where is your CentPlugins Traps binary
default to [/usr/local/centreon/bin]
> /usr/share/centreon/bin
Path /usr/share/centreon/bin OK
The RRDs.pm package can be located elsewhere. In order to locate it, run this in another terminal:
updatedb
locate RRDs.pm
Where is the RRD perl module installed [RRDs.pm]
default to [/usr/lib/perl5/RRDs.pm]
>
Path /usr/lib/perl5 OK
/usr/bin/rrdtool OK
/usr/bin/mail OK
/usr/bin/php OK
/usr/bin/perl OK
Finding Apache user : apache
Finding Apache group : apache
Centreon user and group
The group of Centreon applications: This group is used for access rights between monitoring applications:
What is the Centreon group ? [centreon]
default to [centreon]
>
What is the Centreon user ? [centreon]
default to [centreon]
>
Monitoring user
User that will be used for running the monitoring engine
If you are using Centreon Engine:
What is the Monitoring engine user ?
> centreon-engine
If you are using Nagios:
What is the Monitoring engine user ?
> nagios
User that will be used for running the broker daemon:
If you are using Centreon Broker:
What is the Broker user ? (optional)
> centreon-broker
If you are using NDOUtils:
What is the Broker user ? (optional)
> nagios
Monitoring log directory
If you are using Centreon Engine:
What is the Monitoring engine log directory ?
> /var/log/centreon-engine
If you are using Nagios:
What is the Monitoring engine log directory ?
> /var/log/nagios
Plugin path
Where is your monitoring plugins (libexec) directory ?
default to [/usr/lib/nagios/plugins]
>
Path /usr/lib/nagios/plugins OK
Add group centreon to user apache OK
Add group centreon to user centreon-engine OK
Add group centreon-engine to user apache OK
Add group centreon-engine to user centreon OK
Sudo configuration
------------------------------------------------------------------------
Configure Sudo
------------------------------------------------------------------------
Where is sudo configuration file
default to [/etc/sudoers]
>
/etc/sudoers OK
If you are using Centreon Engine:
What is the Monitoring engine init.d script ?
> /etc/init.d/centengine
What is the Monitoring engine binary ?
> /usr/sbin/centengine
What is the Monitoring engine configuration directory ?
> /etc/centreon-engine
If you are using Nagios
What is the Monitoring engine init.d script ?
> /etc/init.d/nagios
What is the Monitoring engine binary ?
> /usr/sbin/nagios
What is the Monitoring engine configuration directory ?
> /etc/nagios
If you are using Centreon Broker:
Where is the configuration directory for broker module ?
> /etc/centreon-broker
Where is the init script for broker module daemon ?
> /etc/init.d/cbd
If you are using NDOUtils:
Where is the configuration directory for broker module ?
> /etc/nagios
Where is the init script for broker module daemon ?
> /etc/init.d/ndo2db
- Sudo configuration::
- Do you want me to reconfigure your sudo ? (WARNING) [y/n], default to [n]: > y Configuring Sudo OK
Apache configuration
------------------------------------------------------------------------
Configure Apache server
------------------------------------------------------------------------
Do you want to add Centreon Apache sub configuration file ?
[y/n], default to [n]:
> y
Create '/etc/httpd/conf.d/centreon.conf' OK
Configuring Apache OK
Do you want to reload your Apache ?
[y/n], default to [n]:
> y
Reloading Apache service OK
Preparing Centreon temporary files
Change right on /var/log/centreon OK
Change right on /etc/centreon OK
Change macros for insertBaseConf.sql OK
Change macros for sql update files OK
Change macros for php files OK
Change right on /usr/local/etc OK
Add group centreon to user apache OK
Add group centreon to user centreon-engine OK
Add group centreon to user centreon OK
Copy CentWeb in system directory
Install CentWeb (web front of centreon) OK
Change right for install directory
Change right for install directory OK
Install libraries OK
Write right to Smarty Cache OK
Copying libinstall OK
Change macros for centreon.cron OK
Install Centreon cron.d file OK
Change macros for centAcl.php OK
Change macros for downtimeManager.php OK
Change macros for eventReportBuilder.pl OK
Change macros for dashboardBuilder.pl OK
Install cron directory OK
Change right for eventReportBuilder.pl OK
Change right for dashboardBuilder.pl OK
Change macros for centreon.logrotate OK
Install Centreon logrotate.d file OK
Prepare export-mysql-indexes OK
Install export-mysql-indexes OK
Prepare import-mysql-indexes OK
Install import-mysql-indexes OK
Prepare indexes schema OK
Install indexes schema OK
Pear module installation
------------------------------------------------------------------------
Pear Modules
------------------------------------------------------------------------
Check PEAR modules
PEAR 1.4.9 1.9.4 OK
DB 1.7.6 1.7.14 OK
DB_DataObject 1.8.4 1.10.0 OK
DB_DataObject_FormBuilder 1.0.0RC4 1.0.2 OK
MDB2 2.0.0 2.4.1 OK
Date 1.4.6 1.4.7 OK
HTML_Common 1.2.2 1.2.5 OK
HTML_QuickForm 3.2.5 3.2.13 OK
HTML_QuickForm_advmultiselect 1.1.0 1.5.1 OK
HTML_Table 1.6.1 1.8.3 OK
Archive_Tar 1.1 1.3.1 OK
Auth_SASL 1.0.1 1.0.6 OK
Console_Getopt 1.2 1.2 OK
Net_SMTP 1.2.8 1.6.1 OK
Net_Socket 1.0.1 1.0.10 OK
Net_Traceroute 0.21 0.21.3 OK
Net_Ping 2.4.1 2.4.5 OK
Validate 0.6.2 0.8.5 OK
XML_RPC 1.4.5 1.5.5 OK
SOAP 0.10.1 0.13.0 OK
Log 1.9.11 1.12.7 OK
Archive_Zip 0.1.2 0.1.2 OK
All PEAR modules OK
Configuration file installation
------------------------------------------------------------------------
Centreon Post Install
------------------------------------------------------------------------
Create /usr/share/centreon/www/install/install.conf.php OK
Create /etc/centreon/instCentWeb.conf OK
Centstorage installation
------------------------------------------------------------------------
Start CentStorage Installation
------------------------------------------------------------------------
Where is your Centreon Run Dir directory?
default to [/var/run/centreon]
>
Do you want me to create this directory ? [/var/run/centreon]
[y/n], default to [n]:
> y
Path /var/run/centreon OK
Where is your CentStorage binary directory
default to [/usr/share/centreon/bin]
>
Path /usr/share/centreon/bin OK
Where is your CentStorage RRD directory
default to [/var/lib/centreon]
>
Path /var/lib/centreon OK
Preparing Centreon temporary files
/tmp/centreon-setup exists, it will be moved...
install www/install/createTablesCentstorage.sql OK
Creating Centreon Directory '/var/lib/centreon/status' OK
Creating Centreon Directory '/var/lib/centreon/metrics' OK
Change macros for centstorage binary OK
Install CentStorage binary OK
Install library for centstorage OK
Change right : /var/run/centreon OK
Change macros for centstorage init script OK
Do you want me to install CentStorage init script ?
[y/n], default to [n]:
> y
CentStorage init script installed OK
Do you want me to install CentStorage run level ?
[y/n], default to [n]:
> y
Change macros for logAnalyser OK
Install logAnalyser OK
Change macros for logAnalyser-cbroker OK
Install logAnalyser-cbroker OK
Change macros for nagiosPerfTrace OK
Install nagiosPerfTrace OK
Change macros for purgeLogs OK
Install purgeLogs OK
Change macros for purgeCentstorage OK
Install purgeCentstorage OK
Change macros for centreonPurge.sh OK
Install centreonPurge.sh OK
Change macros for centstorage.cron OK
Install CentStorage cron OK
Change macros for centstorage.logrotate OK
Install Centreon Storage logrotate.d file OK
Create /etc/centreon/instCentStorage.conf OK
Centcore installation
------------------------------------------------------------------------
Start CentCore Installation
------------------------------------------------------------------------
Where is your CentCore binary directory
default to [/usr/share/centreon/bin]
>
Path /usr/share/centreon/bin OK
/usr/bin/ssh OK
/usr/bin/scp OK
Preparing Centreon temporary files
/tmp/centreon-setup exists, it will be moved...
Change CentCore Macro OK
Copy CentCore in binary directory OK
Change right : /var/run/centreon OK
Change right : /var/lib/centreon OK
Change macros for centcore.logrotate OK
Install Centreon Core logrotate.d file OK
Replace CentCore init script Macro OK
Do you want me to install CentCore init script ?
[y/n], default to [n]:
> y
CentCore init script installed OK
Do you want me to install CentCore run level ?
[y/n], default to [n]:
> y
Create /etc/centreon/instCentCore.conf OK
Plugin installation
------------------------------------------------------------------------
Start CentPlugins Installation
------------------------------------------------------------------------
Where is your CentPlugins lib directory
default to [/var/lib/centreon/centplugins]
>
Do you want me to create this directory ? [/var/lib/centreon/centplugins]
[y/n], default to [n]:
> y
Path /var/lib/centreon/centplugins OK
Preparing Centreon temporary files
/tmp/centreon-setup exists, it will be moved...
Change macros for CentPlugins OK
Installing the plugins OK
Change right on centreon.conf OK
CentPlugins is installed
------------------------------------------------------------------------
Start CentPlugins Traps Installation
------------------------------------------------------------------------
Where is your SNMP configuration directory
default to [/etc/snmp]
>
/etc/snmp OK
Where is your SNMPTT binaries directory
default to [/usr/local/centreon/bin/]
> /usr/share/centreon/bin
/usr/share/centreon/bin OK
Finding Apache user : apache
Preparing Centreon temporary files
/tmp/centreon-setup exists, it will be moved...
Change macros for CentPluginsTraps OK
Change macros for init scripts OK
Installing the plugins Trap binaries OK
Change macros for snmptrapd.conf OK
Change macros for snmptt.ini OK
SNMPTT init script installed OK
Install : snmptrapd.conf OK
Install : snmp.conf OK
Install : snmptt.ini OK
Install : snmptt OK
Install : snmptthandler OK
Install : snmpttconvertmib OK
Create /etc/centreon/instCentPlugins.conf OK
End
################################################################################ ## Go to the URL : http://localhost.localdomain/centreon/ ## to finish the setup ## ## Report bugs at http://forge.centreon.com ## ## Thanks for using Centreon. ## ----------------------- ## Contact : [email protected] ## http://www.centreon.com ## ################################################################################
Web Installation
Note
Make sure that your Apache and MySQL servers are up and running before going any further.
Open your favorite web browser and go to::
http://SERVER_ADDRESS/centreon
You should see the following page:
PressNext:
If there is any missing package, install them first then click on theRefreshbutton. Click on theNextbutton once everything isOK
Select your monitoring engine.
Depending on the chosen monitoring engine, you will be asked to enter some specific parameters.
Case of Centreon Engine:
Case of Nagios:
Click on theNextbutton when all parameters are filled.
Select your event broker module.
Depending on the chosen module, you will be asked to enter some specific parameters.
Case of Centreon Broker:
Case of NDOUtils:
Click on theNextbutton when all parameters are filled.
Fill the form with your information. Make sure to remember your password as it will be used for logging in. Click on theNextbutton.
Fill the form with information regarding your database setup and credentials that will be used for connection. Click on theNextbutton.
The database structure will be installed during this process. Everything should pass and displayOK.
Note
You can be asked to add theinnodb_file_per_table=1parameter in the MySQL configuration file.
Click on theNextbutton.
The installation is now finished, click on theFinishbutton, you will be redirected to the login screen:
Enter your credentials, you can now start configuring your monitoring system.