华为交换机端口聚合

介绍了两种模式下的典型应用场景举例。

1、 配置手工负载分担模式链路聚合示例

2 、配置静态LACP 模式链路聚合示例

配置手工负载分担模式链路聚合示例

拓扑：

配置思路

1、创建Eth-trunk;

2、加入Eth-trunk的成员

说明：

创建Eth-Trunk 后，缺省的工作模式为手工负载分担模式，所以，缺省情况下，不需要配置 其模式为手工负载分担模式。如果当前模式已经配置为其它模式，可以使用mode 命令更改

配置步骤：

A、创建Eth-trunk

#配置杭州9312

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname hangzhou-zhongya9312

[hangzhou-zhongya9312]int Eth-Trunk 1

[hangzhou-zhongya9312-Eth-Trunk1]quit

#配置上海9312

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname shanghai-zhongya9312

[shanghai-zhongya9312]int Eth-Trunk 1

[shanghai-zhongya9312-Eth-Trunk1]quit

[shanghai-zhongya9312]

B、加入Eth-trunk的成员接口

#配置杭州9312

[hangzhou-zhongya9312]int GigabitEthernet 0/0/1

[hangzhou-zhongya9312-GigabitEthernet0/0/1]eth-trunk 1

[hangzhou-zhongya9312-GigabitEthernet0/0/1]quit

[hangzhou-zhongya9312]int GigabitEthernet 0/0/2

[hangzhou-zhongya9312-GigabitEthernet0/0/2]eth-trunk 1

[hangzhou-zhongya9312-GigabitEthernet0/0/2]quit

#配置上海9312

[shanghai-zhongya9312]int g0/0/1

[shanghai-zhongya9312-GigabitEthernet0/0/1]eth-trunk 1

[shanghai-zhongya9312-GigabitEthernet0/0/1]quit

[shanghai-zhongya9312]int g0/0/2

[shanghai-zhongya9312-GigabitEthernet0/0/2]eth-trunk 1

[shanghai-zhongya9312-GigabitEthernet0/0/2]quit

C、验证配置结果

在任意视图下执行display trunkmembership 命令，检查Eth-Trunk 1 是否创建成 功，及成员接口是否正确加入，以杭州9312为例。

[hangzhou-zhongya9312]dis trunkmembership eth-trunk 1

Trunk ID: 1

Used status: VALID

TYPE: ethernet

Working Mode : Normal

Number Of Ports in Trunk = 2

Number Of Up Ports in Trunk = 2

Operate status: up

Interface GigabitEthernet0/0/1, valid, operate up, weight=1

Interface GigabitEthernet0/0/2, valid, operate up, weight=1

[hangzhou-zhongya9312]

ping 测试

[hangzhou-zhongya9312]ping 172.40.1.7

  PING 172.40.1.7: 56 data bytes, press CTRL_C to break

    Reply from 172.40.1.7: bytes=56 Sequence=1 ttl=255 time=50 ms

    Reply from 172.40.1.7: bytes=56 Sequence=2 ttl=255 time=50 ms

    Reply from 172.40.1.7: bytes=56 Sequence=3 ttl=255 time=50 ms

    Reply from 172.40.1.7: bytes=56 Sequence=4 ttl=255 time=30 ms

    Reply from 172.40.1.7: bytes=56 Sequence=5 ttl=255 time=50 ms

  --- 172.40.1.7 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 30/46/50 ms

[hangzhou-zhongya9312]

配置文件

#杭州9312的配置单#

[hangzhou-zhongya9312]dis cu

#

sysname hangzhou-zhongya9312

#

vlan batch 3501

#

cluster enable

ntdp enable

ndp enable

#

drop illegal-mac alarm

#

diffserv domain default

#

interface Vlanif1

#

interface Vlanif3501

ip address 172.40.1.8 255.255.255.224

#

interface Eth-Trunk1

description HangZhou--to--ShangHai--DWDM-huiju

set flow-stat interval 10

port link-type trunk

undo port trunk allow-pass vlan 1

port trunk allow-pass vlan 3501

stp disable

#

interface GigabitEthernet0/0/1

description hangzhou--to--shanghai--DWDM-CH21

eth-trunk 1

#

interface GigabitEthernet0/0/2

description hangzhou--to--shanghai--DWDM-CH33

eth-trunk 1

#

return

#上海9312配置单#

[shanghai-zhongya9312]dis cu

#

sysname shanghai-zhongya9312

#

vlan batch 3501

#

cluster enable

ntdp enable

ndp enable

#

interface Vlanif1

#

interface Vlanif3501

ip address 172.40.1.7 255.255.255.224

#

interface Eth-Trunk1

description SW--ShangHai--to--HangZhou--DWDM-huiju

set flow-stat interval 10

port link-type trunk

undo port trunk allow-pass vlan 1

port trunk allow-pass vlan 3501

stp disable

#

interface GigabitEthernet0/0/1

description shanghai--to--hangzhou--DWDM-CH21

eth-trunk 1

#

interface GigabitEthernet0/0/2

description shanghai--to--hangzhou--DWDM-CH33

eth-trunk 1

#

return