EVM DM8168 ccs-5.3 win7平台使用方法，烧写16位nandflash

EVM DM8168 ccs-5.3 win7平台使用方法，烧写16位nandflash 2013-05-20 15:04:58

分类： 嵌入式

EVM DM8168 + D aughter card的板子，欢迎加入DM8168专用qq群交流：282254950
1.bootmode[4:0]需要设置全0
2.打开ccs-5.3软件
3.View->'Target Configurations'下面User Defined 'NewTargetConfiguration.ccxml'双击，如果不存在就创建，
 选'XDS100v2'和'EVMDM8168'，点save然后点'Test Connection',
 最后一行是'The JTAG DR Integrity scan-test has succeeded.'就欧了
4.Select "Debug Perspective" in CCS if not there already: "Window -> Open Perspective -> Debug"
5.View->'Target Configurations'下面User Defined 'NewTargetConfiguration.ccxml'右键，
 选择'Launch Selected Configuration',这样就进入调试会话了
6.View->Debug然后选择'Texas XDS100V2 USB Emulator_0/CortexA8'，点右键"Connect Target",
 等几秒钟，出来汇编试图
------------------------------------------------------------------------------------
7.下载gel文件：http://processors.wiki.ti.com/index.php/File:DM816x_gel.zip
8.Select "Tools -> GEL Files" in CCS; 右键"Load GEL"调出脚本双击显示在Script窗口,
 Scripts -> NETRA External Memory -> do_all, 成功后显示：
 PRCM for OCMCRAM0/1 Initialization Done
------------------------------------------------------------------------------------
9.DVRRDK_03.50.00.05\ti_tools\linux_lsp\collaterals\host-tools\src\nandflash-04.04.00.02.tar.gz
 是我们需要的工程，解压到桌面, 选择File->Import->Code Composer Studio->Existing CCS/CCE Eclipse Project
10.Project菜单选择Clean然后点Build All
------------------------------------------------------------------------------------
11."Run -> Load -> Load Program" 选择'nand-flash-writer.out'
12.Run -> Resume或者F8
13.接下来输入菜单1,选择'c:\u-boot.noxip.bin', offset是0，ECC是BCH8 bit,然后开始干活,
  1分钟写11个page，写220k的u-boot需要10分钟(每个page 2k)
  成功会提示:NAND flashing successful!
14.View->Debug右键XDS100V2 CortexA8，'Disconnect Target'，断电

nandflash工程也可这里下载：http://support.spectrumdigital.com/boards/evm816x/revg/