CentOS 搭建Apache+Subversion
Step 1☆ �绦邪惭b命令
yum install httpd mysql mysql-server php php-*
yum install httpd-devel subversion mod_dav_svn mod_auth_mysql mod_ssl perl perl-CGI
Step 2☆ 启动服务、开启相关端口
service httpd start
service svnserve start
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 3690 -j ACCEPT
iptables -I INPUT -p tcp --dport 3306 -j ACCEPT
service iptables save
Step 3☆ 创建SVN目录及仓库
killall svnserve
mkdir /home/svndata
chmod -R 755 /home/svndata
chown -R apache.apahce /home/svndata
svnserve -d -r /home/svndata
svnadmin create /home/svndata/test
echo "/usr/bin/svnserve -d -r /home/svndata/" > /etc/rc.local
Step 4☆ 创建Apache认证文件及用户
htpasswd -cm /home/svndata/passwd username
htpasswd -m /home/svndata/passwd test
htpasswd -b /home/svndata/passwd username userpasswd ----修改用户密码
Step 5☆ 修改Subversion.conf
vim /etc/httpd/conf.d/subversion.conf
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<Location /svn>
DAV svn
SVNParentPath /home/svndata
AuthType Basic
AuthName "Authorization Realm"
AuthUserFile /home/svndata/apasswd
AuthzSVNAccessFile /home/svndata/authz
Require valid-user
</Location>
Step 6☆ 添加在线修改用户功能
创建文件
cd /var/www/cgi-bin
touch ChangePasswd.ini ChangePasswd.cgi ChangePasswd.log
chmod 755 ChangePasswd.cgi
chmod 666 ChangePasswd.log
-rwxr-xr-x 1 root root 6184 4月 23 22:02 ChangePasswd.cgi
-rw-r--r-- 1 root root 573 4月 23 21:55 ChangePasswd.ini
-rw-rw-rw- 1 root root 298 4月 23 22:24 ChangePasswd.log
vim ChangePasswd.ini
[path] authuserfile=/home/svndata/passwd logfile=/var/www/cgi-bin/ChangePasswd.log [setup] pwdminlen=6 [html] title=SVN用户密码自助修改 description=SVN用户密码自助修改 yourname=用户名 oldpwd=旧密码 newpwd1=新密码 newpwd2=确认新密码 btn_change=修 改 btn_reset=重 置 changepwdok=成功修改密码 changepwdfailed=修改密码失败 servererror=服务器错误 passmustgreater=新密码位数必须大于 twopassnotmatched=两密码不一致 entername=请输入用户名 enterpwd=密码未输入 errorpwd=你的密码不正确 back=返回
vim ChangePasswd.cgi
#!/usr/bin/perl -w
use strict;
use CGI;
my $time = localtime;
my $remote_id = $ENV{REMOTE_HOST} || $ENV{REMOTE_ADDR};
my $admin_email = $ENV{SERVER_ADMIN};
my $cgi = new CGI;
my $pwd_not_alldiginal = "密码不能全为数字";
my $pwd_not_allchar = "密码不能全为字符";
my $user_not_exists ="该用户不存在";
my $file_not_found ="文件不存在,请联系管理员";
my $authuserfile;
my $logfile;
my $pwdminlen;
my $title;
my $description;
my $yourname;
my $oldpwd;
my $newpwd1;
my $newpwd2;
my $btn_change;
my $btn_reset;
my $changepwdok;
my $changepwdfailed;
my $oldpwderror;
my $passmustgreater;
my $twopassnotmatched;
my $entername;
my $enterpwd;
my $errorpwd;
my $back;
&IniInfo;
if ($cgi -> param())
{#8
my $User = $cgi->param('UserName');
my $UserPwd = $cgi->param('OldPwd');
my $UserNewPwd = $cgi->param('NewPwd1');
my $MatchNewPwd = $cgi->param('NewPwd2');
if (!$User)
{&Writer_Log("Enter no user name");
&otherhtml($title,$entername,$back);}
elsif (!$UserPwd )
{&Writer_Log("Enter no OldPasswd");
&otherhtml($title,$enterpwd,$back); }
elsif (length($UserNewPwd)<$pwdminlen)
{&Writer_Log("Password's length must greater than".$pwdminlen);
&otherhtml($title,$passmustgreater.$pwdminlen,$back);}
elsif ($UserNewPwd =~/^\d+$/)
{&Writer_Log("New Passwd isn't all diginal");
&otherhtml($title,$pwd_not_alldiginal,$back);}
elsif ($UserNewPwd =~/^[A-Za-z]+$/)
{&Writer_Log("New Passwd isn't all char");
&otherhtml($title,$pwd_not_allchar,$back);}
elsif ($UserNewPwd ne $MatchNewPwd)
{&Writer_Log("Two new passwords are not matched");
&otherhtml($title,$twopassnotmatched,$back);}
else
{if($authuserfile)
{#6
open UserFile, "<$authuserfile" or die "打开文件失败：$!";
while (<UserFile>)
{#5
my $varstr=$_;
if($varstr =~/($User)/)
{#3
my $eqpos =index($varstr, ":");
my $UserName = substr($varstr,0,$eqpos);
my $cryptpwd = substr($varstr,$eqpos + 1,13);
next if($UserName ne $User);
if(crypt($UserPwd,$cryptpwd) eq $cryptpwd)
{#a
my $rc = system("/usr/bin/htpasswd -b $authuserfile $User $UserNewPwd");
if ($rc == 0)
{#1
&Writer_Log( $User."：Change Passwd");
&otherhtml($title,$changepwdok,$back);
}#1
else
{#2
&Writer_Log( $User."：Change Passwd Failed");
&otherhtml($title,$changepwdfailed,$back);
}#2
exit;
}#a
else
{#b
&Writer_Log("Old Passwd is Incorrect ");
&otherhtml($title,$errorpwd,$back);
}#b
exit;
}#3
else
{#4
if(eof)
{ &Writer_Log($User."：no this user");
&otherhtml($title,$user_not_exists,$back);
exit;
}
else
{next;}
}#4
}#5
close UserFile;
}#6
else
{#7
&Writer_Log($authuserfile."：no found");
&otherhtml($title,$file_not_found,$back);
}#7
}
}#8
else
{&Index_Html;}
sub IniInfo{
my $inifile = "/var/www/cgi-bin/ChangePasswd.ini";
open CGI_INI_FILE, "<$inifile" or die "打开文件失败：$!";;
while (<CGI_INI_FILE>)
{
my $eqpos =index($_,'=');
my $len = length($_);
if ($_ =~/authuserfile/)
{$authuserfile= substr($_, $eqpos + 1, $len - $eqpos -2);}
elsif ($_ =~/logfile/)
{$logfile= substr($_, $eqpos + 1);}
elsif ($_ =~/pwdminlen/)
{$pwdminlen= substr($_, $eqpos + 1);}
elsif ($_ =~/title/)
{$title = substr($_, $eqpos + 1);}
elsif ($_ =~/description/)
{$description = substr($_, $eqpos + 1);}
elsif ($_ =~/yourname/)
{$yourname = substr($_, $eqpos + 1);}
elsif ($_ =~/oldpwd/)
{$oldpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/newpwd1/)
{$newpwd1= substr($_, $eqpos + 1);}
elsif ($_ =~/newpwd2/)
{$newpwd2= substr($_, $eqpos + 1);}
elsif ($_ =~/btn_change/)
{$btn_change = substr($_, $eqpos + 1);}
elsif ($_ =~/btn_reset/)
{$btn_reset = substr($_, $eqpos + 1);}
elsif ($_ =~/changepwdok/)
{$changepwdok = substr($_, $eqpos + 1);}
elsif ($_ =~/changepwdfailed/)
{$changepwdfailed = substr($_, $eqpos + 1);}
elsif ($_ =~/oldpwderror/)
{$oldpwderror = substr($_, $eqpos + 1);}
elsif ($_ =~/passmustgreater/)
{$passmustgreater = substr($_, $eqpos + 1);}
elsif ($_ =~/twopassnotmatched/)
{$twopassnotmatched = substr($_, $eqpos + 1);}
elsif ($_ =~/entername/)
{$entername = substr($_, $eqpos + 1);}
elsif ($_ =~/enterpwd/)
{$enterpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/errorpwd/)
{$errorpwd= substr($_, $eqpos + 1);}
elsif ($_ =~/back/)
{$back = substr($_, $eqpos + 1);}
}
close CGI_INI_FILE;
}
sub Index_Html
{
print "Content-type: text/html\n\n";
print <<END_OF_PAGE;
<html >
<head>
<title>$title</title>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312" />
</head>
<body>
<HR>
<center><h1>$description</h1>
</center>
<form method="POST" enctype="multipart/form-data" action="/cgi-bin/ChangePasswd.cgi">
<br>
<TABLE align="center">
<TR><TD class="t_text">$yourname</TD><TD><input type="text" name="UserName" /></TD></TR>
<TR><TD class="t_text">$oldpwd</TD><TD><input type="password" name="OldPwd" /></TD></TR>
<TR><TD class="t_text">$newpwd1</TD><TD><input type="password" name="NewPwd1" /></TD></TR>
<TR><TD class="t_text">$newpwd2</TD><TD><input type="password" name="NewPwd2" /></TD></TR>
</TABLE>
<br>
<TABLE align="center">
<TR><TD><input type="submit" name="chgpasswd" value="$btn_change"> <input type="reset" value="$btn_reset"></TD></TR>
</TABLE>
</form>
<HR>
<font color="#FF0000">注意:新密码位数必需大于$pwdminlen，且为字母与数字组合</font>
</body>
</html>
END_OF_PAGE
}
sub otherhtml{
print "Content-type: text/html\n\n";
print <<END_OF_PAGE;
<html>
<head>
<meta http-equiv="Content-Language" content="zh-cn">
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
<title>$_[0]</title>
</head>
<body>
<p align="center"><font size="5">$_[1]</font></p>
<p align="center"><a href="/cgi-bin/ChangePasswd.cgi"><font size="4">$_[2]</font></a></p>
<HR>
</body>
</html>
END_OF_PAGE
}
sub Writer_Log{
if($logfile)
{
my $loginfo ="[".$time."] "." [".$remote_id."] "." || ".$_[0];
open LOGFILE,">>$logfile" or die "Couldn't open LOG FILE for writing: $!";
print LOGFILE ("$loginfo\n");
close LOGFILE;
}
}
http://ip/cgi-bin/ChangePasswd.cgi
Step 7☆ SVN客户端测试
svn://ip/test http://ip/svn/test