linux LVM
[root@qing ~]# fdisk -l #查看磁盘信息
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 5221 41833260 8e Linux LVM
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
[root@qing ~]#
[root@qing ~]#
[root@qing ~]#
[root@qing ~]# fdisk /dev/sdb #进入分区管理
Command (m for help): n #创建新分区
Command action
e extended
p primary partition (1-4)
p #分区类型为主分区
Partition number (1-4): 1
First cylinder (1-652, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-652, default 652): +5368M #分区大小为5368M
Value out of range.
Last cylinder or +size or +sizeM or +sizeK (1-652, default 652):
Using default value 652
Command (m for help): p #查看分区信息
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 652 5237158+ 83 Linux
Command (m for help): t #修改分区类型
Selected partition 1 #指定分区，26行中"Partition number (1-4): 1" 指定的分区
Hex code (type L to list codes): 8e #类型为8e 为LVM类型
Changed system type of partition 1 to 8e (Linux LVM)
Command (m for help): p
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 652 5237158+ 8e Linux LVM
Command (m for help): w #写入分区标
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: 设备或资源忙.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@qing ~]#
[root@qing ~]#
[root@qing ~]#
[root@qing ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 5221 41833260 8e Linux LVM
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 652 5237158+ 8e Linux LVM #已经创建了一个LVM分区
[root@qing ~]#
[root@qing ~]# pvcreate /dev/sdb1 #使用pvcreate创建pv
Writing physical volume data to disk "/dev/sdb1"
Physical volume "/dev/sdb1" successfully created
[root@qing ~]#
[root@qing ~]# pvdisplay #查看已经存在的PV
--- Physical volume ---
PV Name /dev/sda2
VG Name VolGroup00
PV Size 39.90 GB / not usable 20.79 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 1276
Free PE 0
Allocated PE 1276
PV UUID XUeOGK-U3Xu-I8AD-NdZn-tISP-G7iH-C9yRTI
"/dev/sdb1" is a new physical volume of "4.99 GB" #刚创建的PV
--- NEW Physical volume ---
PV Name /dev/sdb1
VG Name
PV Size 4.99 GB
Allocatable NO
PE Size (KByte) 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID RyVVY8-teMl-wHSq-oEcM-fEYu-axDK-pw7liR
[root@qing ~]#
[root@qing ~]# vgcreate volGroup00 /dev/sdb1 #创建VG ，可以使用VG名volGroup00或者使用新的，volGroup01
Volume group "volGroup00" successfully created
[root@qing ~]#
[root@qing ~]# vgdisplay #查看已经创建好的VG
--- Volume group ---
VG Name volGroup00
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 4.99 GB
PE Size 4.00 MB
Total PE 1278
Alloc PE / Size 0 / 0
Free PE / Size 1278 / 4.99 GB # 新创建的VG，可使用的容量为4.99G
VG UUID pBeCkt-D5bU-avY6-0mkd-DgGd-BcX5-qvj6q0
--- Volume group ---
VG Name VolGroup00
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 39.88 GB
PE Size 32.00 MB
Total PE 1276
Alloc PE / Size 1276 / 39.88 GB
Free PE / Size 0 / 0
VG UUID 4WRogY-DsNe-ZtCq-gQKm-HmZX-UxwD-GxNwHA
[root@qing ~]#
[root@qing ~]# lvcreate -L 4.99G -n lvData2 volGroup00 #创建LV ，-L指定大小，-n指定LV名称 ，vo1Group00：表示从这个VG中划分LV
Rounding up size to full physical extent 4.99 GB
Logical volume "lvData2" created
[root@qing ~]#
[root@qing ~]# mkfs -t ext3 /dev/volGroup00/lvData2 #格式化LV，以便存储资料
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
655360 inodes, 1308672 blocks
65433 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 25 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@qing ~]#
[root@qing ~]# df -h #挂载前磁盘信息
文件系统 容量 已用 可用 已用% 挂载点
/dev/mapper/VolGroup00-LogVol00
37G 6.0G 29G 18% /
/dev/sda1 99M 13M 81M 14% /boot
tmpfs 500M 0 500M 0% /dev/shm
[root@qing ~]#
[root@qing ~]#
[root@qing ~]# mount /dev/volGroup00/lvData2 /boot #挂载LV
[root@qing ~]# df -h #挂载后磁盘信息
文件系统 容量 已用 可用 已用% 挂载点
/dev/mapper/VolGroup00-LogVol00
37G 6.0G 29G 18% /
/dev/sda1 5.0G 139M 4.6G 3% /boot
tmpfs 500M 0 500M 0% /dev/shm
/dev/mapper/volGroup00-lvData2
5.0G 139M 4.6G 3% /boot
[root@qing ~]#
[root@qing ~]# lvremove /dev/volGroup00/lvData2 #移除创建的LV
Do you really want to remove active logical volume lvData2? [y/n]: y
Logical volume "lvData2" successfully removed
[root@qing ~]# vgremove /dev/volGroup00 #移除创建的VG
Volume group "volGroup00" successfully removed
[root@qing ~]#
[root@qing ~]# blkid #查看所有分区的label以及UUID
/dev/mapper/VolGroup00-LogVol01: TYPE="swap"
/dev/mapper/VolGroup00-LogVol00: UUID="e24e83e0-9d0c-468a-9dae-93e2a0113ec2" TYPE="ext3"
/dev/sda1: LABEL="/boot" UUID="9c46230d-c5f4-4039-9822-23ee1089f2f7" TYPE="ext3"
/dev/hdc: LABEL="CentOS_5.8_Final" TYPE="iso9660"
/dev/VolGroup00/LogVol00: UUID="e24e83e0-9d0c-468a-9dae-93e2a0113ec2" TYPE="ext3"
/dev/VolGroup00/LogVol01: TYPE="swap"
/dev/cdrw: LABEL="CentOS_5.8_Final" TYPE="iso9660"
/dev/volGroup01/vlg01_1: UUID="e73b79aa-d95f-422a-b021-7c50ac402117" SEC_TYPE="ext2" TYPE="ext3"
/dev/mapper/volGroup01-vlg01_1: UUID="e73b79aa-d95f-422a-b021-7c50ac402117" SEC_TYPE="ext2" TYPE="ext3"
[root@qing ~]#
[root@qing ~]# vi /etc/fstab #配置系统在启动的时候挂载LV
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
UUID=e73b79aa-d95f-422a-b021-7c50ac402117 /boot ext3 defaults 1 2