ospf在帧中继环境下NBMA模式的配置

 

用模拟器配的，拓扑图很简单，不好上传，描述一下吧！用了4个3640三层交换

机，R1，R2，R3，R4，其中R2模拟帧中继交换机。具体的拓扑连接是这样的：

R2的S0/0连R1的S0/1，R2的S0/1连R3的S0/1，R2的S0/2连R4的S0/1。具体的配

置是这样的：

 

R1:
interface Loopback0
 ip address 1.1.1.1 255.255.255.0

interface Serial0/1
 ip address 192.168.1.1 255.255.255.0
 encapsulation frame-relay
 serial restart-delay 0
 frame-relay map ip 192.168.1.3 103
 frame-relay map ip 192.168.1.4 104
 no frame-relay inverse-arp
 ip ospf network non-broadcast(默认）

router ospf 1
 log-adjacency-changes
 network 0.0.0.0 255.255.255.255 area 0
 neighbor 192.168.1.3
 neighbor 192.168.1.4

FR:
frame-relay switching
interface Serial0/0
 no ip address
 encapsulation frame-relay
 serial restart-delay 0
 clockrate 64000
 frame-relay intf-type dce
 frame-relay route 103 interface Serial0/1 301
 frame-relay route 104 interface Serial0/2 401
!
interface Serial0/1
 no ip address
 encapsulation frame-relay
 serial restart-delay 0
 clockrate 64000
 frame-relay intf-type dce
 frame-relay route 301 interface Serial0/0 103
!
interface Serial0/2
 no ip address
 encapsulation frame-relay
 serial restart-delay 0
 clockrate 64000
 frame-relay intf-type dce
 frame-relay route 401 interface Serial0/0 104

R3:
interface Loopback0
 ip address 3.3.3.3 255.255.255.0
!
interface Loopback1
 ip address 10.0.0.1 255.255.255.0

interface Serial0/1
 ip address 192.168.1.3 255.255.255.0
 encapsulation frame-relay
 ip ospf priority 0
 ip ospf network non-broadcast(默认）
 serial restart-delay 0
 frame-relay map ip 192.168.1.1 301
 no frame-relay inverse-arp
 
router ospf 1
 router-id 3.3.3.3
 log-adjacency-changes
 network 0.0.0.0 255.255.255.255 area 0

R4:
interface Loopback0
 ip address 4.4.4.4 255.255.255.0

interface Serial0/1
 ip address 192.168.1.4 255.255.255.0
 encapsulation frame-relay
 ip ospf priority 0
 ip ospf network non-broadcast(默认）
 serial restart-delay 0
 frame-relay map ip 192.168.1.1 401
 no frame-relay inverse-arp
 
router ospf 1

 network 0.0.0.0 255.255.255.255 area 0

本文出自 “虎虎生威” 博客，转载请与作者联系！