测试使用monit监控服务
测试使用monit监控服务
一、基础环境
1、在tvm-rpm的基础上测试。
2、网络：
eth0：host-only（用于虚拟内网，手动固定IP，这样从宿主机可以直接连接到这个vm）
eth1：NAT（用于上外网，动态IP）
[root@tvm-rpm ~]# cd /etc/sysconfig/network-scripts/
[root@tvm-rpm network-scripts]# cat ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
IPADDR=192.168.56.253
PREFIX=24
GATEWAY=192.168.56.1
DNS1=192.168.56.254
[root@tvm-rpm network-scripts]# cat ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=dhcp
DNS1=192.168.56.254
二、配置monit环境
1、已经配置过salt-master服务，且在配置中，启用了pid。
[root@tvm-rpm ~]# vim /etc/salt/master
pidfile: /var/run/salt-master.pid
2、安装monit
[root@tvm-rpm ~]# yum -y install monit
安装后默认的log文件在：
/var/log/monit
滚动压缩也已经配置好：
[root@tvm-rpm ~]# cat /etc/logrotate.d/monit
/var/log/monit {
missingok
notifempty
size 100k
create 0644 root root
postrotate
/sbin/service monit condrestart > /dev/null 2>&1 || :
endscript
}
3、个性化配置
1）配置文件在
/etc/monit.conf
/etc/monit.d
2）默认已经自带了针对log的配置：
[root@tvm-rpm ~]# cat /etc/monit.d/logging
# log to monit.log
set logfile /var/log/monit
3）邮件相关：
[root@tvm-rpm ~]# vim /etc/monit.d/monit-mail.conf
# mail server
set mailserver smtp.xxx.com port 25
username "[email protected]" password "xxx"
# later delivery retry
set eventqueue
basedir /var/monit
slots 100
# mail format
set mail-format {
from: [email protected]
subject: [monit Alter][test from xxx] $HOST $SERVICE $EVENT
message: $EVENT Service $SERVICE
Date: $DATE
Action: $ACTION
Host: $HOST
Description: $DESCRIPTION
Your faithful employee,
monit
}
# mail recipients
set alert [email protected]
4）针对指定服务的监控：
[root@tvm-rpm ~]# vim /etc/monit.d/salt-master.conf
check process salt-master with pidfile /var/run/salt-master.pid
start program = "/etc/init.d/salt-master start"
stop program = "/etc/init.d/salt-master stop"
注1：监控方式多样，这个可以查阅配置文件和官网的示例。
注2：告警对象也可以指定事件范围。
4、启动服务
[root@tvm-rpm ~]# service monit start
Starting monit: monit: generated unique Monit id 5701f8ce7fd7a6a69c713ec2b1b5f22e and stored to '/root/.monit.id'
[ OK ]
查看log：无异常。
加入开机启动：
[root@tvm-rpm ~]# chkconfig monit on
5. 查看邮件
[monit Alter][test from xxx] tvm-rpm tvm-rpm Monit instance changed
发件人：test <[email protected]>
时 间：2015年7月21日(星期二) 下午2:42
收件人：admin <[email protected]>
Monit instance changed Service tvm-rpm
Date: Tue, 21 Jul 2015 14:42:47 +0800
Action: start
Host: tvm-rpm
Description: Monit started
Your faithful employee,
monit
6、继续测试停止salt-master服务，看看效果
[root@tvm-rpm ~]# service salt-master stop
Stopping salt-master daemon: [ OK ]
[root@tvm-rpm ~]# tail -f /var/log/monit
[CST Jul 21 14:42:47] info : 'tvm-rpm' Monit started
[CST Jul 21 14:48:49] error : 'salt-master' process is not running
[CST Jul 21 14:48:50] info : 'salt-master' trying to restart
[CST Jul 21 14:48:50] info : 'salt-master' start: /etc/init.d/salt-master
查看邮件有2封：
[monit Alter][test from xxx] tvm-rpm salt-master Does not exist
Does not exist Service salt-master
Date: Tue, 21 Jul 2015 14:48:49 +0800
Action: restart
Host: tvm-rpm
Description: process is not running
Your faithful employee,
monit
[monit Alter][test from xxx] tvm-rpm salt-master Exists
Exists Service salt-master
Date: Tue, 21 Jul 2015 14:49:51 +0800
Action: alert
Host: tvm-rpm
Description: process is running with pid 8380
Your faithful employee,
monit
查看salt-master服务：
[root@tvm-rpm ~]# service salt-master status
salt-master (pid 8380) is running...
7、查看monit自带的web服务
[root@tvm-rpm ~]# vim /etc/monit.d/monit-web.conf
set httpd port 2812 and
use address 192.168.56.253
allow localhost
allow 192.168.56.0/24
allow admin:monit
重启服务：
[root@tvm-rpm ~]# service monit restart
浏览器输入用户名admin，密码monit即可访问：
http://192.168.56.253:2812/
8. 给monit的web服务加上ssl
1）生成证书
[root@tvm-rpm ~]# ls /etc/pki/tls
cert.pem certs misc openssl.cnf private
自定义一个ssl证书生成的配置文件：
[root@tvm-rpm ~]# echo 'abc' >/tmp/openssl.rnd
[root@tvm-rpm ~]# cat /tmp/monit.ssl.conf
# create RSA certs - Server
RANDFILE = /tmp/openssl.rnd
[ req ]
default_bits = 2048
default_md = sha256
encrypt_key = yes
distinguished_name = req_dn
x509_extensions = cert_type
[ req_dn ]
countryName = Country Name (2 letter code)
countryName_default = ZH
stateOrProvinceName = State or Province Name (full name)
stateOrProvinceName_default = TESTPROV
localityName = Locality Name (eg, city)
localityName_default = TESTCITY
organizationName = Organization Name (eg, company)
organizationName_default = TESTCOMP
organizationalUnitName = Organizational Unit Name (eg, section)
organizationalUnitName_default = TESTSVR
commonName = Common Name (FQDN of your server)
commonName_default = server.office.com
emailAddress = Email Address
emailAddress_default = [email protected]
[ cert_type ]
nsCertType = server
生成私钥和证书：
[root@tvm-rpm ~]# openssl req -new -x509 -days 365 -nodes \
-config /tmp/monit.ssl.conf -out /etc/pki/tls/certs/monit.pem \
-keyout /etc/pki/tls/certs/monit.pem
查看文件/etc/pki/tls/certs/monit.pem可以看到：
-----BEGIN PRIVATE KEY-----
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
-----END CERTIFICATE-----
生成Diffie-Hellman参数：
[root@tvm-rpm ~]# openssl gendh 1024 >> /etc/pki/tls/certs/monit.pem
查看文件/etc/pki/tls/certs/monit.pem可以看到：
-----BEGIN DH PARAMETERS-----
-----END DH PARAMETERS-----
设置权限：
[root@tvm-rpm ~]# chmod 600 /etc/pki/tls/certs/monit.pem
输出证书信息：
[root@tvm-rpm ~]# openssl x509 -text -noout -in /etc/pki/tls/certs/monit.pem
2）调整monit配置
[root@tvm-rpm ~]# vim /etc/monit.d/monit-web.conf
set httpd port 2812 and
use address 192.168.56.253
allow localhost
allow 192.168.56.0/24
allow admin:monit
SSL ENABLE
PEMFILE /etc/pki/tls/certs/monit.pem
3）访问
https://192.168.56.253:2812/
ZYXW、参考
1、Real-world configuration examples
https://mmonit.com/wiki/Monit/ConfigurationExamples
2、Enable SSL In Monit
https://mmonit.com/wiki/Monit/EnableSSLInMonit
3、初识Openssl
http://blog.csdn.net/jiangwlee/article/details/7724274