配置ppp over Frame-Relay

R1, R2通过FRAME-RELAY交换机连接，配置虚拟接口，以PPP的方式实现两台路由器的互访

 

配置实例

R1

conf t

int s2/0

encap f

no arp f

no frame inver

no shut

exit

int s2/0.1 point-to-point

frame interface-dlci 102 ppp vritual-template 1

exit

exit

int virtual-template 1

ip ad 10.1.1.1 255.255.255.0

end

 

 

R2

conf t

int s2/0

encap f

no arp f

no frame inver

no shut

int s2/0.1 point-to-point

frame interface-dlci 201 ppp virtual-template 1

exit

exit

int virtual-template 1

ip ad 10.1.1.2 255.255.255.0

end

 

校验

 

R1#ping 10.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/55/100 ms

R2#ping 10.1.1.1               

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/53/172 ms

 

本文出自 “穿过地狱去看海” 博客，谢绝转载！