Ubuntu 7.04下 佳的美（gademei)usb电视盒（utv-330)安装记录

Ubuntu 7.04下 佳的美（gademei)usb电视盒（utv-330)安装记录

    已经全面的将我的工作，开发，生活都升级到了ubuntu7.04上了，折腾了将近3天，总算是跑起来了。也试着习惯了ubuntu,为了安装我的佳的美 utv-330电视盒，一直忙活到了4点多才弄好。主要是就是一个驱动的问题，找了n多网页才找到了解决的问题的方法，备忘如下：
   
For Ubuntu’s Feisty Fawn :

sudo apt - get install mercurial linux - headers - $(uname  - r) linux - source build - essential

cd  / lib / firmware

wget http :// konstantin . filtschew . de / v4l - firmware / firmware_v4 . tgz

tar xvzf firmware_v4 . tgz

hg clone http :// mcentral . de / hg /~ mrec / v4l - dvb - experimental

cd v4l - dvb - experimental

make

make install

reboot

sudo modprobe em2880 - dvb

If on the next reboot, the card stops working the em2880-dvb module is not being loaded properly in Feisty. To fix this :

cd /etc/modprobe.d
sudo gedit dvbstick

then add this line to the new dvbstick file :
install em28xx /sbin/modprobe --ignore-install em28xx; /bin/sleep 2; /sbin/modprobe em2880-dvb

reboot and it should be back up and running.

—————————————————————————————————–
For Ubuntu’s Edgy Eft :

sudo su

apt - get install mercurial linux - headers - $(uname  - r) linux - source build - essential

cd  / lib / firmware

wget http :// konstantin . filtschew . de / v4l - firmware / firmware_v4 . tgz

tar xvzf firmware_v4 . tgz

hg clone http :// mcentral . de / hg /~ mrec / v4l - dvb - kernel


cd v4l - dvb - kernel

make

make install

reboot

sudo modprobe em2880 - dvb

If on the next reboot, the card stops working the em2880-dvb module is not being loaded properly in Edgy. To fix this :

cd /etc/modprobe.d
sudo gedit dvbstick

then add this line to the new dvbstick file :
install em28xx /sbin/modprobe --ignore-install em28xx; /bin/sleep 2; /sbin/modprobe em2880-dvb

reboot and it should be back up and running.

—————————————————————————————————–
For Fedora Core 6 :

You should first make sure you have the development tools installed. Applications —> Add / Remove Software —>Development —> Development Tools.

su -

yum install mercurial

cd /lib/firmware

wget http://konstantin.filtschew.de/v4l-firmware/firmware_v4.tgz

tar xvzf firmware_v4.tgz

hg clone http://mcentral.de/hg/~mrec/v4l-dvb-kernel


cd v4l-dvb-kernel

make

make install

reboot

sudo modprobe em2880-dvb

If on reboot, the card stops working the em2880-dvb module is not being loaded properly in FC6. To fix this :

cd /etc/modprobe.d
sudo gedit dvbstick

then add this line to the new dvbstick file :

install em28xx /sbin/modprobe --ignore-install em28xx; /bin/sleep 2; /sbin/modprobe em2880-dvb

From there I just had to add the new tuner to MythTV via mythtv-setup in Ubuntu Edgy Eft and then the Hauppage HVR-950 worked smoothly in Linux with MythTV & ATSC HDTV (Although, I could never get the unit to play analog cable tv channels).