Linux内核及网络设置

Linux内核及网络设置

可以通过/etc/sysctl.conf控制和配置 Linux内核及网络设置。 # 避免放大攻击 net.ipv4.icmp_echo_ignore_broadcasts = 1 # 开启恶意icmp错误消息保护 net.ipv4.icmp_ignore_bogus_error_responses = 1 # 开启SYN洪水攻击保护 net.ipv4.tcp_syncookies = 1 # 开启并记录欺骗，源路由和重定向包 net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.default.log_martians = 1 # 处理无源路由的包 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 # 开启反向路径过滤 net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # 确保无人能修改路由表 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 # 不充当路由器 net.ipv4.ip_forward = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # 开启execshild kernel.exec-shield = 1 kernel.randomize_va_space = 1 # IPv6设置 net.ipv6.conf.default.router_solicitations = 0 net.ipv6.conf.default.accept_ra_rtr_pref = 0 net.ipv6.conf.default.accept_ra_pinfo = 0 net.ipv6.conf.default.accept_ra_defrtr = 0 net.ipv6.conf.default.autoconf = 0 net.ipv6.conf.default.dad_transmits = 0 net.ipv6.conf.default.max_addresses = 1 # 优化LB使用的端口 # 增加系统文件描述符限制 fs.file-max = 65535 # 允许更多的PIDs (减少滚动翻转问题); may break some programs 32768 kernel.pid_max = 65536 # 增加系统IP端口限制 net.ipv4.ip_local_port_range = 2000 65000 # 增加TCP最大缓冲区大小 net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 # 增加Linux自动调整TCP缓冲区限制 # 最小，默认和最大可使用的字节数 # 最大值不低于4MB，如果你使用非常高的BDP路径可以设置得更高 # Tcp窗口等 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_window_scaling = 1