darkstat

介绍： http://www.oschina.net/p/darkstat
配置：/etc/darkstat/init.cfg

# Turn this to yes when you have configured the options below.                                                              
START_DARKSTAT=yes

# Don't forget to read the man page.                                                                                        

# You must set this option, else darkstat may not listen to                                                                 
# the interface you want                                                                                                    
INTERFACE="-i eth1"

PORT="-p 666"
BINDIP="-b 127.0.0.1"
LOCAL="-l 192.168.1.0/255.255.255.0"
DNS="--no-dns" #Don't reverse reolve IPs to host names