WiFi Air Sniffer

1. install AirPcap dongle driver
 after installation, check device manager
 Packet Caputre devices - AirPcap USB Wireless Capture Adapter (or similar)

 
2. Run Wireshark (current version v1.10.6)
  Click icon menu "Show the caputre options" (or menu: Capture: Options)
  check the AirPcap driver
  double click, show "Edit interface Settings"
  Check "Caputre packets in promiscuous mode"
  Click "Wireless Settings"
  Set Channel (same as AP setting, for example 2412 BG11), Offset (0), Capture type (802.11+Radio)
  Click "Start" to capture packets, Click "Stop" to stop capturing

 
3. search all packets related with one AP/Sta
   wlan.addr == **:**:**:**:**:**