XmallWood

HP-UX 主机巡检-nickel 脚本命令细细读--系统信息

nickel脚本请见附件：

一、系统信息：

用与收集系统所有软硬件信息：

1、系统信息 system information

使用命令： /usr/contrib/bin/machinfo

说明：这个是nickel生成的index.html文件首页的内容，包括了CPU、内存、Firmware、Platform、OS、信息

2、启动时间 uptime

使用命令： uptime

说明：机器启动到现在的天数

3、环境变量

使用命令： env

4、文件系统和磁盘信息

1）显示启动盘上的LIF信息：

使用命令： lifls -il /dev/rdsk/c0t6d0s2
命令显示：

         lifls -il /dev/rdsk/c0t6d0s2
volume ISL10 data size 7984 directory size 8 06/10/27 14:23:07
filename   type   start   size     implement created
===============================================================
ISL        -12800 584     242      0          06/10/27 14:23:07
AUTO       -12289 832     1        0          06/10/27 14:23:07
HPUX       -12928 840     1024     0          06/10/27 14:23:07
PAD        -12290 1864    1468     0          06/10/27 14:23:07
LABEL      BIN    3336    8        0          09/11/05 22:41:22

HP-UX系统启动过程:

参见：http://fanqiang.chinaunix.net/a1/b6/20011121/0808001581.html

hpux的启动过程概况如下：
pdc(Processor-dependent-code,在rom中，完成硬件自检
| 读取stable storge中的信息，如autosearch，
| primarypath等等，然后调用isl
isl (Initial system loader,在boot盘的lif区域。lif
| 区域主要有四个文件，分别是sl,hpux,AUTO,LABEL
| 在#下，可以使用lifls命令察看，同时可以使用
| lifcp 察看AUTO的内容。
| isl的主要任务是执行lif区域的hpux，同时也可
| 以改变stable storge中的部分信息，如
| primarypath,autoboot等等
hpux 引导os,主要是读取/stand/vmunix文件，同时把
| 控制权交给内核，
|
init 从这里开始，就是软件之间的启动了
说明：显示LIF卷上的文件信息 ,相关LIF的文章，请看：http://hi.baidu.com/penguinhe2006/blog/item/470c153d3047cae33c6d97b0.html

2）显示系统lvm信息：

使用命令：vgdisplay -v ; strings /etc/lvmtab

3）显示启动卷信息：

使用命令：lvlnboot -v

4）系统mount情况：

使用命令：cat /etc/fstab ; mount -p

5）分区可用空间：

使用命令： bdf -i

6）NFS mount :

使用命令： showmount -a

7）SWAP 信息：

使用命令： swapinfo -tam

5、系统软件及补丁安装情况：

使用命令：swlist -l bundle ; swlist -l product ; swlist -l product | grep PH ; swlist -l fileset -a state -a patch_state

6、启动盘设备path 信息：

使用命令：setboot

7、计划任务情况：

使用命令： crontab -l

8、磁盘IO 情况：

使用命令：iostat -t 5 2

9、IPC 情况：

使用命令：ipcs -bcop

10、内核加载的设备驱动

使用命令：lsdev

11、nfs情况

使用命令：nfsstate

12、进程情况：

使用命令：ps -ef

13、系统负载情况：

使用命令：sar -A 5 2

14、系统重启日志：

使用命令： cat /var/adm/shutdownlog

15、系统内核参数情况：

使用命令：cat /stand/system; kctune ; kcusage; sysdef

16、系统日志：

使用命令：cat /var/adm/syslog/syslog.log ; cat /var/adm/syslog/OLDsyslog.log

17、top信息

使用命令： top -d5

18、vmstat 信息：

使用命令：vmstat -dS 5 2

19、内核具体信息：

使用命令：what /stand/vmunix

#!/sbin/sh
#
# #### $ Revision: A.01.12b15 $ $ Author: Robert Sakic $ $ Date: December 2002 $
# @(#) $ Rev: A.01.12b15-001 $ $ Modified by: Liew Teck Yuen ([email protected]) $
# Modified Rev   : A.01.12b15-001
# Modified By    : Liew Teck Yuen ([email protected],[email protected])
# Last Modified : 06 Jun 2006
#
###############################################################################
#
#                               N I C K E L
#
#       Network related Information Collector, Keeper and Elaborator
#
###############################################################################
#
#
# DESCRIPTION: yet another script to collect data, will display the
#              collected data as html.
#
###############################################################################
#
#               Copyright 1996 - 2002 Robert Sakic, HP
#                       ALL RIGHTS RESERVED.
#
#       Permission granted to use this script so long as the copyright above
#       is maintained, and credit is given for any use of the script.
#
###############################################################################
#
#                       !!!! Legal Stuff !!!!!
#
###############################################################################
#
#           Copyright (C) 1996,1997,1998,1999 Hewlett-Packard Company
#
#       The enclosed software and documention includes copyrighted works of
#       Hewlett-Packard Co. For as long as you comply with the following
#       limitations, you are hereby authorized to (i) use, reproduce, and
#       modify the software and documentation, and to (ii) distribute the
#       software and documentation, including modifications, for
#       non-commercial purposes only.
#
#       1. The enclosed software and documentation is made available at no
#           charge in order to advance the general development of support of
#           networking products.
#
#       2. You may not delete any copyright notices contained in the
#           software or documentation. All hard copies, and copies in
#           source code or object code form, of the software or
#           documentation (including modifications) must contain at least
#           one of the copyright notices.
#
#       3. The enclosed software and documentation has not been subjected
#           to testing and quality control and is not a Hewlett-Packard Co.
#           product. At a future time, Hewlett-Packard Co. may or may not
#           offer a version of the software and documentation as a product.
#
#       4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS".
#           HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE,
#           REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
#           DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL
#           PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR
#           DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES,
#           EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE
#           DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF
#           MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
#       5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY
#           DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
#           (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION,
#           MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
#
###############################################################################
# Below are some options you might want to modify.

# Colors used in the script, change them for your needs
FCOL=RED                # Font Color for emphasized Text
FCOL2=BLUE              # Heading Font Color
FCOL3=GREEN             # Secondary Heading Font Color
BGCOL=WHITE             # Page Background Color
HCOL=D1D1D1             # Heading Background Color
# Options for the vmstat command
VM_INT=5  # vmstat Interval
VM_COUNT=1  # vmstat Count
# Options for the iostat command
IO_INT=5  # iostat Interval
IO_COUNT=1  # iostat Count
# Options for the system activity reporter command
SAR_t=5   # sar seconds
SAR_n=1   # sar Intervals
###############################################################################
#
# No need for user changes below this line.
#
###############################################################################

### Start: Added by [email protected]
PWD1=`pwd`
if [[ $PWD1 = "/" ]]
then
PWD1=""
fi
TMP_DIR=/tmp
OUT_DIR=$TMP_DIR/$BASE.$HOST
### End: Added by [email protected]

BASE=`basename $0`
HOST=`hostname`
MYTTY=`who am i | awk '{print $2}'`

### Start: Remarked by [email protected]
### OUT_DIR=/tmp/$BASE.$HOST
### End: Remarked by [email protected]

### Start: Added by [email protected]
PWD=`pwd`
TMP_DIR=/tmp
OUT_DIR=$TMP_DIR/$BASE.$HOST
### End: Added by [email protected]

PATH=/usr/sbin:/usr/bin:/usr/contrib/bin:$PATH
ORB_SBIN=/opt/orbplus/sbin
ORB_LBIN=/opt/orbplus/lbin
OCMP_OUT=/tmp/$BASE.$HOST/OCMP/
OOB=/opt/OCMP/bin
EOO=/etc/opt/OCMP
SBIN=/sbin
UBIN=/usr/bin
USBIN=/usr/sbin
OS=$(uname -r | awk -F. '{print $2}')
OsRel=`uname -r | awk -F. '{print $2"."$3}'`

function _usage {
print $*
print "\nUsage:\n$0 [ -m <email address> | -o <output directory> | -n | -? ]\n\nOptions:\n\t-m <email address>\tEmail the archive to <email address>\n\t-o <output directory>\tWhere to direct the output\n\t-n\t\t\tDon't create archive\n\t-?\t\t\tshow this Help Menu\n
This Script will collect System relevant data and save it either in a
archive or in a directory named nickel.hostname (e.g. nickel.$HOST).

Unless you've redirected your output with the -o option, you'll find a file\ncalled index.html in the /tmp/nickel.$HOST directory, open it with your\nfavourite Web browser to see the output of the script.\n\nnickel revision: `what $0|awk '{print $3}'`"
exit 1
}

function _init {
_not_running
        _need_root
        _need_os
        SHAR=YES
        EMAIL=NO
        while getopts :nm:o: opt
        do
        case $opt in
               n)      SHAR=NO
                       ;;
               m)      EMAIL=YES
                       EMAILADDR=$OPTARG
                       ;;
               o)      OUT_DIR=$OPTARG
                       ;;
               :)      _usage "The -m and -o options require an argument.";
                       ;;
               ?)      if [ $OPTARG != "?" ] ; then
                          _usage "invalid option $OPTARG"
                       else
                          _usage
                       fi
                       ;;
        esac
        done
        if [[ $SHAR = "NO" && $EMAIL = "YES" ]]; then
                _usage "\tYou must generate an archive to use the -m option" "\n\tRemove the -n from the command line";
        fi
        _common
}

function _not_running {
RUNNING=$(ps -ef|grep "$0"|grep -v grep|grep -v $$|grep -v man)
if [[ "$RUNNING" != "" ]]
        then
         PID=$(echo ${RUNNING} | awk {"print \$2;exit"})
         echo "\nERROR: The tool is already running under pid: ${PID}\n"
         echo "You must wait until it completes.\n"
         exit 1
        fi
}

function _need_root {
        if [[ `id -u` != "0" ]]
        then
        echo "\nERROR: Your User ID appears to be: `id -u` (Loginname: $LOGNAME)\n"
        echo "Sorry, but you must have root privileges to run this script.\n"
        exit 1
        fi
}

function _need_os {
        if [[ $OS != "10" && $OS != "11" ]]
        then
        echo "\nERROR: This Script supports only HP-UX 10 or HP-UX 11"
        exit 1
        fi
}

function _make_directory {
        clear
        if [[ -d $OUT_DIR ]]; then
            echo "###\n###\tRemoving results left over from a previous run in"
            echo "###\t\t$OUT_DIR"
            echo "###"
            rm -rf $OUT_DIR
        fi
if [[ -f $BASE.$HOST.tar.gz ]]; then
  echo "###\n###\tRemoving an older tar.gz file"
  echo "###\t\t$OUT_DIR/../$BASE.$HOST.tar.gz"
  echo "###"
  rm -f $OUT_DIR/../$BASE.$HOST.tar.gz
fi
clear

### Start: Remarked by [email protected]
### echo "nickel revision: `what $0|awk '{print $3}'`
### \n\n\tNote, the Output will go to the following Directory: $OUT_DIR
### \n\tPoint your favourite Web browser to that directory and"
### echo "\topen the file index.html to see the results."
### End: Remarked by [email protected]

### Start: Added by [email protected]
echo "Nickel Revision: `grep Rev: $0|grep -v awk|awk '{print $5}'`"
echo "\n\tNote, the Temporary Output will go to the following Directory:
$OUT_DIR
\n\tPoint your favourite Web browser to that directory and
open the file index.html to see the results.
\n\tFinal Archived File:
$PWD1/$BASE.$HOST.tar.gz"
### End: Added by [email protected]

mkdir $OUT_DIR
LOGFILE=$OUT_DIR/nickel.log
}

### HTML functions start here ###

function _heading {
 echo "\n<CENTER><TABLE WIDTH="100%">
 <TR><TD align=center bgcolor=$HCOL>
 $1 $2 $3 $4 $5\n</TABLE></CENTER>"
}

function _footer {
echo "</PRE>\n</BODY></HTML>"
}

function _item {
echo " $1 $2 $3 $4 $5 $6 $7"
}

function _title {
 echo "<HTML><HEAD><TITLE>`basename $1` $2 $3 $4 $5</TITLE></HEAD>
 <BODY BGCOLOR=$BGCOL>"
 _heading `basename $1` $2 $3 $4 $5
 echo "\n<PRE>"
}

function _title2 {
 echo "<HTML><HEAD><TITLE>`basename $1` $2 $3 $4 $5</TITLE></HEAD>
 <BODY BGCOLOR=$BGCOL>"
 _heading2 `basename $1` $2 $3 $4 $5
 echo "\n<PRE>"
}

##############################################################################
#
# START RG
# Start of functions added by Roger Goff, HP, 12/98 for providing
# additional information in the index.html file
#
##############################################################################
###
### _mhz: report the machine MHz value
###
function _mhz {
whence sar > /dev/null && (( ncpu = `sar -M 1 1 | wc -l` - 5 ))|| ncpu=0
[[ "$ncpu" -gt 1 ]] && echo "$ncpu x \c"
echo `echo itick_per_tick/D | adb -k /stand/vmunix /dev/kmem \
| grep "000" | awk '{print $2/10000 " MHz" }' `
}

###
### WHICH_PARAM: pick the appropriate kernel parameters to query
###
function WHICH_PARAM
{
if [[ $OsRel = "10.01" ]]
then
    KernelSoftPage="__maxphysmem"
    SoftPgUnits="bytes"
    KernelRam=mem_ptr
    MbConversion=1048576    # For converting Physical Mem to MB
elif [[ $OsRel = "10.10" || $OsRel = "10.20" ]]
then
    KernelSoftPage="__maxphyspages"
    SoftPgUnits="4K"
    KernelRam=mem_ptr
    MbConversion=1048576    # For converting Physical Mem to MB
elif [[ $OsRel = 11.+([0-9]) ]]
then
    KernelSoftPage="__maxphyspages"
    KernelRam="memory_installed_in_machine"
    SoftPgUnits="4K"
    MbConversion=256    # For converting Physical Mem to MB
fi
}

###
### GET_REAL_MEMORY: Find out how much PHYSICAL memory
###                    is in the system (regardless of what the soft
###                    page parameter is)
###
function GET_REAL_MEMORY
{
Kernel=/stand/vmunix
PhysicalMemory=`print "$KernelRam/U" | adb -k $Kernel /dev/kmem | \
   grep $KernelRam | awk '{ if (NF == 2) { print $2 }}'`
# For HP-UX 10.X, the amount of memory is reported in bytes.
# For HP-UX 11.X, the amount of memory is reported in 4K pages.
eval `print | \
   awk '{
             printf "PhysicalMemory=%d\n", Val / Conversion;
        }' Val=$PhysicalMemory, Conversion=$MbConversion `

# Check to see if we got a non-null, numeric answer
if [[ ! -z $PhysicalMemory ]] && [[ $PhysicalMemory = +([0-9]) ]]
then
    if (( $PhysicalMemory ))
    then
       echo "\n\t$PhysicalMemory MB"
    fi
fi
}

###
### GET_SOFT_PAGES: Get soft page parameter
###
function GET_SOFT_PAGES
{
Kernel=/stand/vmunix
SoftPgs=`print ${KernelSoftPage}?D | adb $Kernel - | \
grep $KernelSoftPage | awk '{ if (NF == 2) {print $2}}'`

# Check to see if we got a non-null, numeric answer

if [[ ! -z $SoftPgs ]] && [[ $SoftPgs = +([0-9]) ]]
then
   if (( SoftPgs ))
   then
     if [[ $SoftPgUnits = 4K ]]
     then
       (( SoftPgs /= 256 ))
     else
       (( SoftPgs /= 1024 ))
     fi
    # Only print out soft pages if memory has been soft-paged down.
     echo "\tKernel has been soft paged down to $SoftPgs MB"
   fi
fi

}

###
### _ram: get system ram amount
###
function _ram
{
WHICH_PARAM
GET_REAL_MEMORY
GET_SOFT_PAGES
}

###
### OS_VERSION: determine version of the operating system, and
###              use this information to set a shell variable,
###              OsVersion, which can then be used to determine
###              the appropriate action to take.
###

function OS_VERSION {

   if [[ $OsRel = 10.+([0-9]) ]]
   then
     OsVersion=10
     NUMBEROFBITS="32-bit"
   else
     OsVersion=11
     NUMBEROFBITS=`getconf KERNEL_BITS`-bit
   fi
}

###
### GET_CPU_INFO
###
function GET_CPU_INFO {
# First get the CPU version (i.e., PA1.1, PA2.0, etc.)
   Version=$(print ${HWRevParameter}/X | adb -k $Kernel /dev/kmem \
    | sed -e "s/$HWRevParameter:    //" -e "/$HWRevParameter:$/d" \
    | awk '{print $2}')
   Revision=$(print ${RevParameter}/X | adb -k $Kernel /dev/kmem \
    | sed -e "s/${RevParameter}:            //" -e "/${RevParameter}:$/d"\
    | awk '{print $2}')
}

###
### _cpuversion
###
function _cpuversion {

HWRevParameter=cpu_version
RevParameter=cpu_revision_number
Kernel=/stand/vmunix

GET_CPU_INFO

if [[ $Version = 214 ]] # If the processor is a PA2.0,
then
Version=PA-RISC2.0
else
Version=$(grep 0x$Version /usr/include/sys/unistd.h | awk '{print $7}')
fi

echo "${Version}"
}

###
### _revision
###
function _cpurevision {

HWRevParameter=cpu_version
RevParameter=cpu_revision_number
Kernel=/stand/vmunix

GET_CPU_INFO

if [[ $Version = 214 ]] # If the processor is a PA2.0,
then
Major=${Revision%%0*}
Minor=${Revision#*0}
Revision=v${Major}.${Minor}
else
Revision=shit${Revision#@([0-9]|[A-F])@([0-9]|[A-F])@([0-9]|[A-F])@([0-9]|[A-F])@([0-9]|[A-F])@([0-9]|[A-F])@([0-9]|[A-F])}
if [[ Revision = 7 ]]
then
    Revision=v2.2
elif [[ Revision = 8 ]]
then
    Revision=v2.3
elif [[ Revision = 9 ]]
then
    Revision=v2.4
elif [[ Revision = A ]]
then
    Revision=v2.5
elif [[ Revision = B ]]
then
    Revision=v2.6
else
    Revision="Unknown Rev."
fi
fi

echo "${Revision}"
}

##############################################################################
#
# END RG
# End of functions added by Roger Goff 12/98 for providing additional
# information in the index.html file
#
##############################################################################

function _index_html {
NICKEL_UPTIME=`uptime|awk '{print $3,$4,$5}'|sed s/,$//|cut -d ' ' -f3`
if [ `echo $NICKEL_UPTIME | grep :` ]; then
NICKEL_TIME_FORMAT="Hour(s)"
else
NICKEL_TIME_FORMAT="Minute(s)"
fi

echo "<HTML><HEAD><TITLE>System Information for $HOST</TITLE></HEAD>
 <BODY BGCOLOR=$BGCOL>\n<CENTER><TABLE WIDTH="100%">\n
 <TR><TD align=center bgcolor=$HCOL>
 
 System Information for
 $HOST `date`</TD></TR>
 <TR><TD align=right>
 Nickel Rev: `grep Rev: $0 | grep -v awk | awk '{print $5}'`
 </TD></TR>
 </TABLE></CENTER>
 \n<TABLE><TR>"

if [[ -f /usr/contrib//bin/machinfo ]]; then
 echo "<TD COLSPAN=3>
 Machine Information:<PRE>`machinfo`</PRE></TD></TR>
 <TR>\n<TD>Uptime:
 `uptime|awk '{print $3,$4,$5}'|sed s/,$//` $NICKEL_TIME_FORMAT</TD>
 <TD> </TD><TD> </TD>"; else
 echo "<TD>OS:" "`uname -r`", "`echo $NUMBEROFBITS`" "
 <TD>HW:" "`model -D`
 <TD>RAM:" "`_ram`
 </TR><TR>\n<TD>Uptime:
 `uptime|awk '{print $3,$4,$5}'|sed s/,$//` $NICKEL_TIME_FORMAT
 <TD>CPU: " "`_mhz`", "
 `_cpuversion`", "
 `_cpurevision`</TD><TD></TD>"; fi
 echo "</TR></TABLE>
 <TABLE SIZE=100%><TR>
<TD><A HREF="environment.html">Environment</A> </TD>
<TD><A HREF="fs-disk.html">Filesystem/Disk Info</A> </TD>
 <TD><A HREF="software.html">Installed Software</A> 
<A HREF="software_logfiles.html">(logfiles)</A> </TD>
</TR></TABLE> 
 `_create_link $USBIN/setboot`
 `_create_link $UBIN/crontab -l`
 `_create_link $USBIN/dmesg`
 `_graphinfo`
 `_create_link $UBIN/iostat -t $IO_INT $IO_COUNT`
 `_create_link $UBIN/ipcs -bcop`
 <A HREF="java.html">Java</A>
`_create_link3 $USBIN/kmadmin -k`
 `_create_link3 $USBIN/kmadmin -S`
 `_create_link4 $USBIN/kmadmin -s`
 `_create_link $UBIN/locale`
 `_create_link $USBIN/lsdev`
 `_collect_file mail.log /var/adm/syslog/mail.log`
 `_create_link $UBIN/nfsstat`
 `_create_link $UBIN/ps -ef`
 `_create_link $UBIN/sar -A $SAR_t $SAR_n`
 <A HREF="sendmail.html">sendmail</A> 
 `_collect_file shutdownlog /var/adm/shutdownlog`
 `_stand_system`"
if [[ -f $USBIN/kctune ]]; then
 echo "`_create_link $USBIN/kctune`"; else
 echo "`_create_link $USBIN/kmtune`"; fi
 echo "`_collect_file makrec.log1 /var/opt/ignite/logs/makrec.log1`
 `_collect_file recovery.log /var/opt/ignite/recovery/latest/recovery.log`
 `_create_link $USBIN/sysdef`
 `_collect_file syslog /var/adm/syslog/syslog.log`
 `_collect_file OLDsyslog /var/adm/syslog/OLDsyslog.log`
 `_create_link $UBIN/top -d1`
 `_title top > $OUT_DIR/top.html`
 `$UBIN/top -d1 -n200 -f $OUT_DIR/top.html`
 `_footer >> $OUT_DIR/top.html`
 `_create_link $UBIN/vmstat -dS $VM_INT $VM_COUNT`
 `_create_link $UBIN/what /stand/vmunix`
 `_heading Hardware / Diagnostic`
 `_create_link $USBIN/ioscan -fn`
 `_tombstones`
 `_diskinfo`
 `_diag_proc`
 `_cstm $USBIN/cstm`
 `_collect_file event.log /var/opt/resmon/log/event.log`
 `_heading OS`
`_collect_file auto_master /etc/auto_master`
`_collect_file auto_parms /etc/auto_parms.log`
`_collect_file cmcluster.conf /etc/cmcluster.conf`
`_collect_file exports /etc/exports`
 `_collect_file hosts /etc/hosts`
 `_collect_file hosts.equiv /etc/hosts.equiv`
 `_collect_file rhosts /.rhosts`
 `_collect_file inittab /etc/inittab`
 `_collect_file ntp.conf /etc/ntp.conf`
 `_collect_file rc.log /etc/rc.log`
 `_collect_file rc.log.old /etc/rc.log.old`
 `_collect_file securetty /etc/securetty`
 `_collect_file syslog.conf /etc/syslog.conf`
 `_collect_file TIMEZONE /etc/TIMEZONE`
 `_heading Network`
 \nlanscan:
 <PRE>`lanscan`</PRE> 
 <A HREF="network.html">Network Information</A> "
}

function _create_link {
if [ -x $1 ]; then
 if [ -f $1 ]; then
 NAME=`basename $1`
 echo "<A HREF=\"$NAME.html\">$NAME $2</A>  "
 _common_function $1 $2 $3 $4 $5 > $OUT_DIR/$NAME.html
 fi
fi
}

function _create_link2 {
if [ -x $1 ]; then
 if [[ -f $1 && "`$1`" != "" ]]; then
 NAME=`basename $1`
 echo "<A HREF=\"$NAME.html\">$NAME $2</A>  "
 _common_function $1 $2 > $OUT_DIR/$NAME.html
 fi
fi
}

function _create_link3 {
if [ -x $1 ]; then
 if [ -f $1 ]; then
 NAME=`basename $1`
 echo "<A HREF=\"$NAME$2.html\">$NAME $2</A> "
 _common_function $1 $2 $3 $4 $5 > $OUT_DIR/$NAME$2.html
 fi
fi
}

function _create_link4 {
if [ -x $1 ]; then
 if [ -f $1 ]; then
 NAME=`basename $1`
 echo "<A HREF=\"${NAME}_$2.html\">$NAME $2</A> "
 _common_function $1 $2 $3 $4 $5 > $OUT_DIR/${NAME}_$2.html
 fi
fi
}

function _common_function {
        if [ -f $1 ]; then
                _title $1 $2 $3 $4 $5
                _item `basename $1` $2 $3 $4 $5
                echo "\n"
                $1 $2 $3 $4 $5
                _footer
        fi
}

function _copy_file {
        if [ -f $1 ] ; then
                cp $1 $OUT_DIR/$2
        fi
}

function _cp_all_files {
 BASE_all=`basename $1`
 if [ $2 != "0" ]; then
 echo "<A HREF=\"$BASE_all\">$1</A>"
 fi
 cp -R $1 $OUT_DIR
}

function _cat_file {
 if [ -f $1 ]; then
 echo "`_item $1`\n
 <PRE>\n`cat $1`\n</PRE>\n"
 fi
}

function _common {
echo "Nickel StartUp"
        _make_directory
        echo "\n\tCollecting System Information..."
        _index_html             > $OUT_DIR/index.html
        _hfsinfo                > $OUT_DIR/hfsinfo.html
        echo "\n\tVerifying Filesystem/Disk Information..."
         _fsdisk   > $OUT_DIR/fs-disk.html
        echo "\n\tChecking Installed Software..."
        _installed_software     > $OUT_DIR/software.html
        _software_logfiles > $OUT_DIR/software_logfiles.html
        _sendmail               > $OUT_DIR/sendmail.html
        echo "\n\tCollecting Network Information..."

_laninfo > $OUT_DIR/network.html 2>&1
_environment > $OUT_DIR/environment.html

echo "\n\tChecking Java..."
_java > $OUT_DIR/java.html

echo "\n\tChecking for Optional Software..."

        # check if System OpenView infected, i.e. TMN, NNM, ITO

        if [ -f /opt/OV/bin/ov.envvars.sh ]; then
                . /opt/OV/bin/ov.envvars.sh
                _ovstatus       >       $OUT_DIR/ovstatus.html

                if [ -f $OV_CONF/local_p_addr ]; then
                        echo "\t\t * OpenView TMN"
                        export PATH=$PATH:/opt/OV/bin
                        _tmnindex       >> $OUT_DIR/index.html
                        _tmn            > $OUT_DIR/tmn.html
                        _nnm            > $OUT_DIR/nnm.html
                elif [ -f $OV_BIN/ovw ]; then
                        export PATH=$PATH:/opt/OV/bin
                        echo "\t\t * OpenView Network Node Manager"
                        _nnmindex       >> $OUT_DIR/index.html
                        _nnm            > $OUT_DIR/nnm.html
                fi

                if [ -f $OV_BIN/OpC/opc ]; then
                        export PATH=$PATH:/opt/OV/bin
                        echo "\t\t * OpenView ITO"
                        _itoindex       >> $OUT_DIR/index.html
                        _ito            > $OUT_DIR/ito.html
                fi

                if [ -f $OV_NODELOCK/nodelock ]; then
                        _licensing      > $OUT_DIR/ifor.html
                fi
        fi

echo "\n\tChecking for SuperDome, OpenCall, OpenMail, OmniBack,\n\t\t\tMC/SG, ORB, ISDN, X25, SNA..."
_parstatus # check if system has npars, show some information...
_vparstatus # check if system has vpars...
_openCall # OpenCall SS7, IN, MultiService?
        _openmail       # OpenMailing?
        _omniback       # OmniBack?
        _sg             # Service Guard involved?
        _orbplus        # any ORB around?
        _isdn           # ISDN ready?
        _x25            # X.25 somewhere ?
        _sna            # SNA ?
_fibre_channel # FC Adapter
#        _y2k            # Year 2000 Check ! - obsolete per default as of nov 2002

echo "   <HR>`what $0`
</BODY></HTML>" >> $OUT_DIR/index.html

if [ ${SHAR} = YES ]; then
echo "\n\n"

  ### Start: Remarked by [email protected]
  ### tar cvf ${BASE}.${HOST}.tar ${OUT_DIR}
  ### End: Remarked by [email protected]

  ### Start: Added by [email protected]
  cd $TMP_DIR
rm -f ${BASE}.${HOST}.tar
  tar cvf ${PWD1}/${BASE}.${HOST}.tar ${BASE}.${HOST}
  cd $PWD1
rm -f ${BASE}.${HOST}.tar.gz
  ### End: Added by [email protected]

gzip -9 ${BASE}.${HOST}.tar
#rm -rf $OUT_DIR

  ### Start: Remarked by [email protected]
                ## echo "\n\tCreated archive file: $BASE.$HOST.tar.gz"
  ### End: Remarked by [email protected]

  ### Start: Added by [email protected]
                echo "\n\tCreated Archive File:\n\t$PWD1/$BASE.$HOST.tar.gz"
  ### End: Added by [email protected]

                if [ ${EMAIL} = YES ]; then
   uuencode ${BASE}.$HOST.tar.gz ${BASE}.$HOST.tar.gz|\
   /usr/bin/mailx -s "nickel tool output for $HOST" $EMAILADDR
                fi
        fi
}

function _inetd {
 _title inetd
 echo "</PRE><table cellpadding=9><tr>
 <td><A HREF=\"#_iconf\">inetd.conf</A></td>
 <td><A HREF=\"#_isec\">inetd.sec</A></td>
 </table><HR><PRE>\n<A NAME=\"_iconf\">"
 _cat_file /etc/inetd.conf
 echo "\n<HR>\n<A NAME=\"_isec\">"
 _cat_file /var/adm/inetd.sec
 _footer
}

function _netfmt {
FILE=$OUT_DIR/netfmt.html
echo "<A HREF=netfmt.html>netfmt</A>"

### Start: Added by [email protected]
if [ -f /var/adm/nettl.LOG00 ] ; then
 echo "`_title netfmt -f /var/adm/nettl.LOG00`" >> $FILE
 echo "`_item /usr/sbin/netfmt -f /var/adm/nettl.LOG00`">> $FILE
 echo "`/usr/sbin/netfmt -f /var/adm/nettl.LOG00`" >> $FILE
else
 echo "`_title netfmt -f /var/adm/nettl.LOG00`" >> $FILE
 echo " /var/adm/nettl.LOG00 not found." >> $FILE
 fi
 ### End: Added by [email protected]

if [ -f /var/adm/nettl.LOG000 ] ; then
 echo "`_title netfmt -f /var/adm/nettl.LOG000`" >> $FILE
 echo "`_item /usr/sbin/netfmt -f /var/adm/nettl.LOG000`">> $FILE
 echo "`/usr/sbin/netfmt -f /var/adm/nettl.LOG000`" >> $FILE
else
 echo "`_title netfmt -f /var/adm/nettl.LOG000`" >> $FILE
 echo " /var/adm/nettl.LOG000 not found." >> $FILE
 fi

_footer >> $FILE
}

function _stand_system {
 FILE=stand_system.html
 echo "<A HREF=\"$FILE\">/stand/system</A>  "
 echo "`_title /stand/system`
 `_cat_file /stand/system`
 `_footer`" > $OUT_DIR/$FILE
}

function _collect_file {
if [ -f $2 ]; then
 FILE=$1.html
 echo "<A HREF=\"$FILE\">$1</A>  "
 echo "`_title $2`
 `_cat_file $2`
 `_footer`" > $OUT_DIR/$FILE
fi
}

function _cstm {
if [ -f $1 ]; then
 if [ "`swlist -l product|grep \"^ PHSS_14407\"`" ]; then
 echo "PHSS_14407 installed!"; else
 FILE1=cstm.html
 echo "<A HREF=\"$FILE1\">Diagnostics</A>  "
 echo "Map\nSelAll\nInformation ; wait
InfoLog\nDone\nExit\nOK" >$OUT_DIR/cstm_i
 echo "`_title DIAGNOSTICS``$USBIN/cstm -f $OUT_DIR/cstm_i`
 `_footer`" > $OUT_DIR/$FILE1
 if [[ $OsRel = "10.01" || $OsRel = "10.10" || \
 $OsRel = "10.20" || $OsRel = "11.00" || \
 $OsRel = "11.11" ]]; then
 FILE2=cstm_cpu.html
 echo "<A HREF=\"$FILE2\">CPU Diagnostics</A>  "
 echo "SelClass type \"Processor\" qualifier \"CPU\" hwpath \"\"
Information ; wait\nInfoLog\nDone\nExit\nOK" >$OUT_DIR/cstm_c
 echo "`_title CPU DIAGNOSTICS`
 `$USBIN/cstm -f $OUT_DIR/cstm_c`
 `_footer`" > $OUT_DIR/$FILE2
 rm $OUT_DIR/cstm_c; fi
 rm $OUT_DIR/cstm_i
 fi
fi
}

function _diskinfo {
FILE=$OUT_DIR/diskinfo.html
 echo "<A HREF=diskinfo.html>Diskinfo</A>  "
 echo "`_title Diskinfo``_item diskinfo -v`" > $FILE
 for i in `ls /dev/rdsk/c*`
 do
 diskinfo -v $i 2> $LOGFILE
 echo "\n" >> $FILE
 done >> $FILE
 echo "`_footer`" >> $FILE
}

function _lifinfo {
FILE=$OUT_DIR/lifinfo.html
 echo "<A HREF=lifinfo.html>LIF info</A>  "
 echo "`_title LIF directory contents`" > $FILE
echo "Information on root, boot, swap, and dump logical volumes:\n" >> $FILE
echo "\n`lvlnboot -v`\n\n" >> $FILE
 for i in `ls /dev/rdsk/c*`
 do
echo "lifls -il $i" >> $FILE

        ### Start: Remarked by [email protected]
        ### lifls -il $i    >> $FILE
        ### End: Remarked by [email protected]

        ### Start: Added by [email protected]
        lifls -il $i    >> $FILE 2>&1
        ### End: Added by [email protected]

echo "\n"    >> $FILE
        done       >> $FILE
        echo "`_footer`"        >> $FILE
}

function _tombstones {
if [ -f /var/tombstones/ts99 ]; then
FILE=$OUT_DIR/tombstones.html
echo "<A HREF=tombstones.html>tombstones</A>  "
echo "`_title tombstones`" >$FILE
echo "`_cat_file /var/tombstones/ts99`\n`_footer`" >> $FILE
fi
}

function _graphinfo {
if [ -c /dev/crt ]; then
 FILE=$OUT_DIR/graphinfo.html
 echo "<A HREF=graphinfo.html>graphinfo</A>  "
echo "`_title graphinfo` Available Graphic devices: " > $FILE
# create links at top of page
for i in `ls /dev/crt*`
 do
 echo "<A HREF=#__$i>$i</A>" >> $FILE
 done >> $FILE
# execute graphinfo for each device file found
echo "\n" >> $FILE
 for i in `ls /dev/crt*`
 do
echo "<A NAME="__$i"></A>`_item graphinfo $i`"
 graphinfo $i 2>> $FILE
 echo "\n" >> $FILE
 done >> $FILE
 echo "`_footer`" >> $FILE
fi
}

function _diag_proc {
 FILE=diagproc.html
 echo "<A HREF=\"$FILE\">Diag SW/Proc's</A>  "
 echo "`_title Diag related SW/Processes``_item SW`">$OUT_DIR/$FILE
 echo "`swlist -l product | grep -i -e upp -e red -e iag`\n\n
 \n`_item Processes`\n`ps -ef | grep -i -e mon -e log | grep -v rlog`
 `_footer`" >> $OUT_DIR/$FILE
}

function _services {
        _title /etc/services
        _cat_file /etc/services
        _footer
}

function _laninfo {
 _title Network Information
 echo "\t`_netstat`\t`_gated`\t`_name_resolution`\n
 `_cp_all_files /etc/rc.config.d 1`\t`_create_link /usr/sbin/arp -a`\t\t`_services>$OUT_DIR/services.html`<A HREF=services.html>/etc/services</A>\n\t"
 _inetd > $OUT_DIR/inetd.html
 echo "\t<A HREF=inetd.html>inetd.sec/conf</A>\t\t`_netfmt`<HR>
 `_item lanscan`\n\n`lanscan`<HR>
 `_item ioscan -fnC lan`\n`ioscan -fnC lan`<HR>
 `_item ifconfig/ping/linkloop/nslookup for every LANIC`\n</PRE>\n"

for LANIC in `lanscan -i|awk '{print $1}'|grep -v atm|grep -v cip|grep -v el10`
do
export MACADDR=`lanscan|grep $LANIC | awk '{print $2}'`

   if [[ $OS = "10" ]]; then
     export MACTYPE=`lanscan|grep $LANIC | awk '{print $8}'`
     export LINKLOOPIF=$LANIC
   else
     export MACTYPE=`lanscan|grep $LANIC | awk '{print $7}'`
     export LINKLOOPIF=`lanscan -ip|grep $LANIC | awk '{print $NF}'`
   fi

export NMID=`lanscan|grep " $LANIC "| awk '{print $7}'`
STATUS=0

if [ "`lanscan | awk '/'$LANIC'/ && !/awk/ {print $6}'`" != "DOWN" ]; then

if [ `ifconfig $LANIC|awk '/inet/ && !/awk/ {print $2}'` ]; then
 STATUS=1
 IPADDR=`ifconfig $LANIC|awk '/inet/ && !/awk/ {print $2}'`
 export IFNAME=`nslookup $IPADDR | awk '/Name:/ && !/awk/ {print $2}'`
 export IFSHORT=`echo $IFNAME|cut -d . -f1`
 fi
 fi
 echo "<TABLE BORDER>\n<TR>\n<TH>$LANIC:
 </TR>\n<TR>
 <TD VALIGN=CENTER ALIGN=CENTER>ifconfig:
 <TD VALIGN=BOTTOM ALIGN=LEFT>
 <PRE>`ifconfig $LANIC|sed 's/</\</'|sed 's/>/\>/`</PRE>
 </TR>
 `_linkloop $NMID $MACADDR $LINKLOOPIF`
 `_lanadmin $NMID $LANIC`
 `_ping $IPADDR`
 `_nslookup $IPADDR`
 `_nslookup $IFSHORT`
 </TABLE>\n"
done
echo "</BODY></HTML>"
}

function _linkloop {
 if [[ $MACTYPE != "X25" && $MACTYPE != "FDDI" ]]; then
 export INSTANCE=$3
 if [[ $OS = "10" ]]; then
 export INSTANCE=$1
 fi
 echo "<TR VALIGN=CENTER ALIGN=CENTER>
 <TD>linkloop:
 <TD VALIGN=BOTTOM ALIGN=LEFT><PRE>`linkloop -i$INSTANCE $2`</PRE>
 </TR>"
 fi
}

function _gated {
 echo "<A HREF="gated.html">gated information</A> "
 echo "`_title gated`\n`what /usr/sbin/gated`<HR>
 `_cat_file /etc/gated.conf`" > $OUT_DIR/gated.html
}

function _lanadmin {
 if [[ $MACTYPE != "X25" ]]; then
 export INSTANCE=$2
 if [[ $OS = "10" ]]; then
 export INSTANCE=$1
 fi
 echo "<TR VALIGN=CENTER ALIGN=CENTER>
 <TD>lanadmin:
 <TD VALIGN=BOTTOM ALIGN=LEFT><PRE>`lanadmin -m $INSTANCE`\n`lanadmin -s $INSTANCE`\n`lanadmin -x $INSTANCE 2> $LOGFILE`</PRE>
 </TR>"
 fi
}

function _ping {
 if [[ "$1" != "" && "$STATUS" -eq "1" ]]; then
 echo "<TR VALIGN=CENTER ALIGN=CENTER>
 <TD>ping:
 <TD VALIGN=BOTTOM ALIGN=LEFT><PRE>`ping $1 -n 3`</PRE>
 </TR>"
 fi
}

function _nslookup {
 if [[ "$1" != "" && "$STATUS" -eq "1" ]]; then
 echo "<TR VALIGN=CENTER ALIGN=CENTER>
 <TD>nslookup $1
 <TD VALIGN=BOTTOM ALIGN=LEFT><PRE>`nslookup $1`</PRE>
 </TR>"
 fi
}

function _name_resolution {
 echo "<A HREF="nameres.html">name resolution information</A> "
 _title Name Resolution >> $OUT_DIR/nameres.html
 if [ -f /etc/resolv.conf ] ; then
 echo "`_item resolv.conf`\n`cat /etc/resolv.conf`" \
 >> $OUT_DIR/nameres.html
 fi

if [ -f /etc/nsswitch.conf ] ; then
 echo "<HR>\n`_item nsswitch.conf`\n`cat /etc/nsswitch.conf`" \
 >> $OUT_DIR/nameres.html
 else
 echo "`_item no nsswitch.conf`\n" >> $OUT_DIR/nameres.html
 fi
 echo "\n</BODY></HTML>" >> $OUT_DIR/nameres.html
}

function _netstat {
 echo "<A HREF=\"netstat.html\">netstat information</A>"
 echo "\n`_title netstat`</PRE><table cellpadding=9>
 <tr><td><A HREF=\"#_nrn\">netstat -rn</A></td>"> $OUT_DIR/netstat.html
 if [ $OS != 11 ]; then
 echo "<td><A HREF=\"#_nm\">netstat -m</A></td>">> $OUT_DIR/netstat.html
 fi
 echo "<td><A HREF=\"#_ns\">netstat -s</A></td>
 <td><A HREF=\"#_an\">netstat -an</A></td></table>
 <HR>\n<A NAME=\"_nrn\">`_item netstat -rn`
 <PRE>`netstat -rn`</PRE><HR>" >> $OUT_DIR/netstat.html
 if [ $OS != 11 ]; then
 echo "<A NAME=\"_nm\"> `_item netstat -m` <PRE>`netstat -m` </PRE><HR>" >> $OUT_DIR/netstat.html
 fi
 echo "<A NAME=\"_ns\">`_item netstat -s` <PRE>`netstat -s` </PRE><HR>
 <A NAME=\"_an\"> `_item netstat -an` <PRE>`netstat -an`</PRE><HR>
 \n</BODY></HTML>" >> $OUT_DIR/netstat.html
}

function _environment {
        _title Environment Variables
        env
        _footer
}

function _installed_software {
if [ $OS -eq 11 ]; then
 SWSTRING="swlist -l fileset -a state -a patch_state -a show_superseded_patches=true"
 SWSTRHTML="<td><A HREF=\"#_stat\">swlist -l fileset -a state -a patch_state"
else
 SWSTRING="swlist -l fileset -a state"
 SWSTRHTML="<td><A HREF=\"#_stat\">swlist -l fileset -a state"
fi
 _title Installed Software
 echo "Total Number of Patches installed: `swlist -l product|grep ' PH'|wc -l`
 </PRE><table cellpadding=9><tr>
 <td><A HREF=\"#_bund\">swlist -l bundle</A></td>
 <td><A HREF=\"#_prod\">swlist -l product</A></td>
 <td><A HREF=\"#_patch\">swlist -l product | grep PH</A></td>
$SWSTRHTML
 </table>
 <HR><PRE>\n<A NAME=\"_bund\">"
 _item swlist -l bundle
 swlist -l bundle
 echo "<HR>\n<A NAME=\"_prod\">"
 _item swlist -l product
 swlist -l product
 echo "<HR>\n<A NAME=\"_patch\">"
 _item swlist -l product | grep PH
 swlist -l product | grep PH
 echo "<HR>\n<A NAME=\"_stat\">"
 _item $SWSTRING
 $SWSTRING
 _footer
}

function _software_logfiles {
 _title SDUX Logfiles
 echo "
 <A HREF=\"#_swagent\">/var/adm/sw/swagent.log</A> 
 <A HREF=\"#_swagentd\">/var/adm/sw/swagentd.log</A> 
 <A HREF=\"#_swconfig\">/var/adm/sw/swconfig.log</A> 
 <A HREF=\"#_swinstall\">/var/adm/sw/swinstall.log</A> 
 <A HREF=\"#_swmodify\">/var/adm/sw/swmodify.log</A> 
 <A HREF=\"#_swremove\">/var/adm/sw/swremove.log</A>

<HR><PRE>\n<A NAME=\"_swagent\">"
_cat_file /var/adm/sw/swagent.log
 echo "<HR>\n<A NAME=\"_swagentd\">"
_cat_file /var/adm/sw/swagentd.log
 echo "<HR>\n<A NAME=\"_swconfig\">"
_cat_file /var/adm/sw/swconfig.log
 echo "<HR>\n<A NAME=\"_swinstall\">"
_cat_file /var/adm/sw/swinstall.log
 echo "<HR>\n<A NAME=\"_swmodify\">"
_cat_file /var/adm/sw/swmodify.log
 echo "<HR>\n<A NAME=\"_swremove\">"
_cat_file /var/adm/sw/swremove.log
}

function _fsdisk {
 _title Filesystem and Harddisk Information
 echo "LIF Information: `_lifinfo`
\n<A HREF=\"lvminfo.html\">Logical Volume Manager Information</A>"
_lvminfo > $OUT_DIR/lvminfo.html
echo "\nMountable file-system entries: `_create_link /usr/bin/cat /etc/fstab`
 \nNumber of free disk blocks: `_create_link $UBIN/bdf`
 \nmounted file systems: `_create_link /etc/mount -p`
 \nClients that have remotely mounted a filesystem: `_create_link $USBIN/showmount -a 2> $LOGFILE`
 \nSystem paging space information: `_create_link $USBIN/swapinfo -tam`
 \nDisplay current values contained in the primary super-block: <A HREF="hfsinfo.html">tunefs -v</A> 
 \n`_create_link $UBIN/strings /etc/lvmtab` "
 _footer
}

function _lvminfo {
 _title LVM Information
 echo "General Information about LVM: `_create_link $USBIN/vgdisplay -v`, `_create_link $USBIN/lvlnboot -v`
<UL>
<LI>Number of available Logical Volumes: `vgdisplay -v|awk '/LV Name/'|wc -l`</LI>
</LI><LI>Names of available Logical Volumes: "
mkdir -p $OUT_DIR/lvmdirectory/dev/dsk
for r in `vgdisplay |awk '/VG Name/ && !/awk/ {print $3}'`
 do
 mkdir -p $OUT_DIR/lvmdirectory/$r
 done
for i in `vgdisplay -v |awk '/LV Name/ && !/awk/ {print $3}'`
 do
 echo "<A HREF=\"lvmdirectory$i.html\">$i</A> "
 done
for k in `vgdisplay -v |awk '/LV Name/ && !/awk/ {print $3}'`
 do
 echo "</PRE>\n`_title Processing Logical Volume $i`
 \nfstyp -v $k" > $OUT_DIR/lvmdirectory$k.html

                ### Start: Remarked by [email protected]
  ### fstyp -v $k  >> $OUT_DIR/lvmdirectory$k.html
                ### End: Remarked by [email protected]

                ### Start: Added by [email protected]
  fstyp -v $k  >> $OUT_DIR/lvmdirectory$k.html 2>&1
                ### End: Added by [email protected]

done
echo "</LI>
<LI>Number of available Volume Groups: `vgdisplay|awk '/VG Name/'|wc -l`
</LI><LI>Names of available Volume Groups: "
for i in `vgdisplay |awk '/VG Name/ && !/awk/ {print $3}'`
 do
 echo "<A HREF=\"lvmdirectory$i.html\">$i</A> "
 done
echo "</LI></UL>"
for i in `vgdisplay |awk '/VG Name/ && !/awk/ {print $3}'`
 do
 echo "</PRE>\n`_title Processing Volume Group $i`
 \nvgdisplay -v $i<PRE>"> $OUT_DIR/lvmdirectory$i.html
 vgdisplay -v $i >> $OUT_DIR/lvmdirectory$i.html
 echo "\n<PRE>\n<H3>Processing Logical Volumes of Volume Group $i</H3>" >> $OUT_DIR/lvmdirectory$i.html
 for j in `vgdisplay -v $i |awk '/LV Name/ && !/awk/ {print $3}'`
 do
 echo "lvdisplay -v $j<PRE>"
 lvdisplay -v $j
 done >> $OUT_DIR/lvmdirectory$i.html
 done
 echo "\n <UL>
 \n<LI>Number of available Physical Volumes: `vgdisplay -v |awk '/PV Name/'|wc -l`</LI>
 <LI>Names of available Physical Volumes:"
for i in `vgdisplay -v|awk '/PV Name/ && !/awk/ {print $3}'`
 do
 echo "<A HREF=\"lvmdirectory$i.html\">$i</A> "
 done
 echo "</LI></UL>"
for k in `vgdisplay -v |awk '/PV Name/ && !/awk/ {print $3}'`
 do
 echo "</PRE>\n`_title Processing Physical Volume $i`
 \npvdisplay -v $k" > $OUT_DIR/lvmdirectory$k.html
 pvdisplay -v $k >> $OUT_DIR/lvmdirectory$k.html
 done
 _footer
}

function _sendmail {
 _title SendMail Information
 mkdir $OUT_DIR/sendmail.conf
 echo "`what /usr/sbin/sendmail|grep -i version`\n\n<HR>\n"
 echo "<A HREF="nameres.html">Name Services</A> "
 cp /etc/mail/* $OUT_DIR/sendmail.conf
 echo "<A HREF="sendmail.conf">Config files</A> "
 _footer
}

function _hfsinfo {
        _title HFS File System Information
        /etc/mount -p|grep " hfs "|awk '{print $1}{system("tunefs -v " $1)}'
        _footer
}

function _orb_command {
        _item $1 $2
        $1 $2
        echo "\n"
}

function _orbadmin {
        _title orb_admin
        _orb_command $ORB_SBIN/orb_admin pr_inc
        _orb_command $ORB_SBIN/orb_admin pr_ir
        _orb_command $ORB_SBIN/orb_admin pr_trader
        _orb_command $ORB_SBIN/orb_admin list_iref
        _orb_command $ORB_SBIN/orb_admin list_iref
        _footer
}

function _orbplus {
 # ORB installed? (there must be a better way to determine
 # the existence of an installed ORB)
 if [ -f /opt/orbplus/lbin/obj_locator ]; then
 echo "`_heading ORB Plus`\n
 <A HREF="orbplus.html">ORB Info</A> " >> $OUT_DIR/index.html
 echo "`_title ORB Plus`\n<A HREF="orb.conf">Configuration files</A>\n<A HREF="orbadmin.html">orbadmin</A>`mkdir $OUT_DIR/orb.conf`
 `cp /etc/opt/orbplus/* $OUT_DIR/orb.conf`
 `_orbadmin > $OUT_DIR/orbadmin.html`
 `_orb_command $ORB_LBIN/naming_server ls_servers`
 </PRE>\n</BODY></HTML>
 `_footer`" > $OUT_DIR/orbplus.html
 echo "\t\t * ORB Plus"
 fi
}

function _isdn {
 if [ -f /opt/ISDN_SCSI/bin/isdninfo ]; then
 FILE=$OUT_DIR/isdn.html
 echo "\t\t * ISDN"
 _heading ISDN >> $OUT_DIR/index.html
 echo "<A HREF="isdn.html">more info</A>
  " >> $OUT_DIR/index.html
 _title ISDN > $FILE
 /opt/ISDN_SCSI/bin/isdninfo >> $FILE
 echo "</PRE>\n</BODY></HTML>" >> $FILE
 fi
}

function _openmail {
 if [ -f /opt/openmail/diag/omenquire ]; then
 FILE1=$OUT_DIR/om_basic.html
 FILE2=$OUT_DIR/om_unix.html
 echo "\t\t * OpenMail"
 _heading OpenMail >> $OUT_DIR/index.html
 echo "<A HREF=om_basic.html>omenquire basic</A>  
 <A HREF=om_unix.html>omenquire unix</A>
  " >> $OUT_DIR/index.html
 _title OpenMail - omenquire basic > $FILE1
 _title OpenMail - omenquire unix > $FILE2
 mv /var/opt/openmail/tmp/enquire_out /var/opt/openmail/tmp/enquire.old
 /opt/openmail/diag/omenquire basic
 _cat_file /var/opt/openmail/tmp/enquire_out >> $FILE1
 _footer >> $FILE1
 rm /var/opt/openmail/tmp/enquire_out
 /opt/openmail/diag/omenquire unix
 _cat_file /var/opt/openmail/tmp/enquire_out >> $FILE2
 _footer >> $FILE2
 mv /var/opt/openmail/tmp/enquire.old /var/opt/openmail/tmp/enquire_out
 fi
}

function _openCall {
echo "\n\tChecking for OpenCall software..."
        if [ -d /opt/OCMP/bin ]; then
         _ocmpindex  >> $OUT_DIR/index.html
        echo "\n\tListing installed OpenCall software..."
         _ocmpsoft  > $OUT_DIR/ocmpsoft.html
        echo "\n\tCollecting OpenCall configuration..."
        mkdir $OUT_DIR/OCMP/
        echo "`_cp_all_files /etc/opt/OCMP/ 1`" >> /dev/null
        echo "\n\tBeginning collection for OpenCall software..."
         _ocmpinfo  > $OUT_DIR/ocmp.html
        echo "\n\tBeginning listing of OpenCall software..."
         _ocmplist  > $OUT_DIR/ocmplist.html
        echo "\n\tgathering OpenCall logs and traces..."
         _ocmptrace  > $OUT_DIR/ocmptrace.html
        echo "\n\tGathering OpenCall traces..."
         _ocmptrc  > $OUT_DIR/ocmptrc.html
        echo "\n\tBeginning collection for OpenCall software configuration..."
         _ocmpcollectconf
        echo "\n\tParsing OpenCall xml configuration files..."
         _ocmpxml
        echo "\n\tFinished parsing OCMP xml..."
        echo "\n\tGathering running process information..."
         _ocmpproc  > $OUT_DIR/ocmpproc.html
        echo "\n\tFormatting properties file..."
         _ocmpprop  > $OUT_DIR/ocmpprop.html
        echo "\n\tFinished OpenCall software collection..."
       fi
}

function _parstatus {
if [[ -f $USBIN/parstatus && `parstatus -s` -eq "0" ]]; then
FILE=$OUT_DIR/parstatus.html
 echo "\t\t * nPar checking"
 _heading nPar >> $OUT_DIR/index.html
 echo "Output of the <A HREF=parstatus.html>parstatus</A> command   ">> $OUT_DIR/index.html
echo "`_title nPartition Status`
\nOutput of the <A HREF=\"#_parstat\">parstatus</A> command
\n<table>\n<tr>
<td><A HREF=\"#_pstat_PI\">Partition Information</A></td><td>   </td>
<td><A HREF=\"#_pstat_CI\">Cell Information</A></td><td>   </td>
<td><A HREF=\"#_pstat_BI\">Cabinet Information</A></td><td>   </td>
</tr>\n<tr>\n
<td><A HREF=\"#_pstat_1\">parstatus -X</A></td><td>   </td>
<td><A HREF=\"#_pstat_1a\">parstatus -w</A></td><td>   </td>
<td><A HREF=\"#_pstat_2\">parstatus -B</A></td><td>   </td>
<td><A HREF=\"#_pstat_3\">parstatus -V -b0</A></td><td>   </td>
<td><A HREF=\"#_pstat_4\">parstatus -I</A></td><td>   </td>
<td><A HREF=\"#_pstat_5\">parstatus -P</A></td><td>   </td>
</tr></table>\n\n<HR>\n<PRE>\n<A NAME=\"_parstat\">
\n`_item parstatus`\n\n`$USBIN/parstatus`
<HR>\n<A NAME=\"_pstat_PI\">\n<center><H2>Partition Information</H2></center><PRE>\n" > $FILE
for i in `parstatus -M -P | cut -d : -f 2`
do
 echo "\n`_item parstatus -V -p $i`\n\n`parstatus -V -p $i`" >> $FILE
done
echo "\n<HR>\n<A NAME=\"_pstat_CI\">\n<center><H2>Cell Information</H2></center><PRE>\n" >> $FILE
for i in `parstatus -M -C|grep -v absent|cut -d: -f2|sed s/cab//|sed s:,cell:/:`
do
 echo "\n`_item parstatus -V -c $i`\n\n`parstatus -V -c $i`" >> $FILE
done
echo "\n<HR>\n<A NAME=\"_pstat_BI\">\n<center><H2>Cabinet Information</H2></center><PRE>\n">> $FILE
for i in `parstatus -M -B|cut -d: -f2`
do
 echo "\n`_item parstatus -V -b $i`\n\n`parstatus -V -b $i`" >> $FILE
done
echo "\n<HR><PRE>\n<A NAME=\"_pstat_1\">
\n`_item parstatus -X`\n\n`$USBIN/parstatus -X`
\n<HR><PRE>\n<A NAME=\"_pstat_1a\">
\n`_item parstatus -W`\n\n`$USBIN/parstatus -w`
\n<HR><PRE>\n<A NAME=\"_pstat_2\">
\n`_item parstatus -B`\n\n`$USBIN/parstatus -B`
\n<HR><PRE>\n<A NAME=\"_pstat_3\">
\n`_item parstatus -V -b0`\n\n`$USBIN/parstatus -V -b0`
\n<HR><PRE>\n<A NAME=\"_pstat_4\">
\n`_item parstatus -I`\n\n`$USBIN/parstatus -I`
\n<HR><PRE>\n<A NAME=\"_pstat_5\">
\n`_item parstatus -P`\n\n`$USBIN/parstatus -P`" >> $FILE
echo "\n</HR>
 `_footer`" >> $FILE
fi
}

function _vparstatus {
if [ -f $USBIN/vparstatus ]; then
FILE=$OUT_DIR/vparstatus.html
 echo "\t\t * vPar checking"
 _heading vPar >> $OUT_DIR/index.html
 echo "Output of the <A HREF=vparstatus.html>vparstatus</A> command   ">> $OUT_DIR/index.html
echo "`_title vPartition Status`

\nOutput of the <A HREF=\"#_vparstat\">vparstatus</A> command

\n<table>
\n<tr>
<td><A HREF=\"#_vpar_w\">vparstatus -w</A></td><td>   </td>
<td><A HREF=\"#_vpar_v\">vparstatus -v</A></td><td>   </td>
<td><A HREF=\"#_vpar_a\">vparstatus -A</A></td><td>   </td>
<td><A HREF=\"#_vpar_e\">vparstatus -e</A></td><td>   </td>
<td><A HREF=\"#_vpar_r\">vparstatus -R</A></td><td>   </td>
</tr>
</table>\n

\n<HR>\n<PRE>
\n<A NAME=\"_vparstat\">\n`_item vparstatus`\n`$USBIN/vparstatus`
\n<HR>\n<PRE>
\n<A NAME=\"_vpar_w\">\n`_item vparstatus -w`\n`$USBIN/vparstatus -w`
\n<HR>\n<PRE>
\n<A NAME=\"_vpar_v\">\n`_item vparstatus -v`\n`$USBIN/vparstatus -v`
\n<HR><PRE>
\n<A NAME=\"_vpar_a\">\n`_item vparstatus -A`\n`$USBIN/vparstatus -A`
\n<HR><PRE>
\n<A NAME=\"_vpar_e\">\n`_item vparstatus -e`\n`$USBIN/vparstatus -e`
\n<HR><PRE>
\n<A NAME=\"_vpar_r\">\n`_item vparstatus -R`\n`$USBIN/vparstatus -R`
\n\n" >> $FILE
echo "\n</HR>
`_footer`" >> $FILE
fi
}

function _omniback {
 if [ -f /etc/opt/omni/cell/cell_server ]; then
 FILE1=$OUT_DIR/omni_cell_info.html
 FILE2=$OUT_DIR/omni_db_info.html
 FILE3=$OUT_DIR/omni_ver_info.html
 FILE4=$OUT_DIR/omni_status_info.html
 OMNIBIN=/opt/omni/bin
 OMNISBIN=/opt/omni/sbin
 echo "\n\t\t * OmniBack"
 _heading OmniBack / DataProtector >> $OUT_DIR/index.html
 echo "Cell Server: `cat /etc/opt/omni/cell/cell_server`   " >> $OUT_DIR/index.html
echo "<A HREF=omni_status_info.html>Status info</A>   " >> $OUT_DIR/index.html
echo "`_title OmniBack II Status Information`<table><tr>
<td><A HREF=\"#_dbcheck\">omnidbcheck -extended</A></td>
 <td><A HREF=\"#_status\">omnisv.sh -status</A></td>
 <td><A HREF=\"#_query\">omnicc -query</A></td>
 <td><A HREF=\"#_prevlast\">omnistat -prev -last 30</A></td>
 <td><A HREF=\"#_devinfo\">omnidownload -dev_info</A></td>
 <td><A HREF=\"#_detail\">omnidownload -list_libraries -detail</A></td>
 </table>
\n<HR>
\n<A NAME=\"_dbcheck\">
\n`_item omnidbcheck -extended`
\n`$OMNISBIN/omnidbcheck -extended`
\n<HR>
\n<A NAME=\"_status\">
\n`_item omnisv.sh -status`
\n`$OMNISBIN/omnisv.sh -status < /dev/null`
\n<HR>
\n<A NAME=\"_query\">
\n`_item omnicc -query`
 \n`$OMNIBIN/omnicc -query`
 \n<HR>
\n<A NAME=\"_prevlast\">
 \n`_item omnistat -prev -last 30`
 \n`$OMNIBIN/omnistat -prev -last 30`
 \n<HR>
\n<A NAME=\"_devinfo\">
 \n`_item omnidownload -dev_info`
 \n`$OMNIBIN/omnidownload -dev_info`
 \n<HR>
\n<A NAME=\"_detail\">
 \n`_item omnidownload -list_libraries -detail`
 \n`$OMNIBIN/omnidownload -list_libraries -detail`
`_footer`" > $FILE4
if
[ -f /opt/omni/bin/omnib ]; then
echo "<A HREF=omni_ver_info.html>Version info</A>   " >> $OUT_DIR/index.html
echo "`_title OmniBack II version Information`
\n`_item Versioning...`
 \n`$OMNIBIN/omniabort -ver`
 \n`$OMNIBIN/omnib -ver`
 \n`$OMNIBIN/omnicc -ver`
 \n`$OMNIBIN/omnicellinfo -ver`
 \n`$OMNIBIN/omniclus -ver`
 \n`$OMNIBIN/omnicreatedl -ver`
 \n`$OMNIBIN/omnidb -ver`
 \n`$OMNIBIN/omnidbva -ver`
 \n`$OMNIBIN/omnidownload -ver`
 \n`$OMNIBIN/omnihealthcheck -ver`
 \n`$OMNIBIN/omnimcopy -ver`
 \n`$OMNIBIN/omniminit -ver`
 \n`$OMNIBIN/omnimlist -ver`
 \n`$OMNIBIN/omnimm -ver`
 \n`$OMNIBIN/omnimnt -ver`
 \n`$OMNIBIN/omnimver -ver`
 \n`$OMNIBIN/omnir -ver`
 \n`$OMNIBIN/omnirpt -ver`
 \n`$OMNIBIN/omnistat -ver`
 \n`$OMNIBIN/omniupload -ver`
 `_footer`" > $FILE3
fi

if [ -f /opt/omni/sbin/utilns/get_info ]; then
 echo "<A HREF=omni_get_info.html>get_info</A>   " >> $OUT_DIR/index.html
echo "`_title OmniBack II Configuration Info`
\n`_item get_info`
 \n`/opt/omni/sbin/utilns/get_info`
 `_footer`" > $OUT_DIR/omni_get_info.html
fi

if [ -f /etc/opt/omni/cell/cell_info ]; then
echo "<A HREF=omni_cell_info.html>Cell Info</A>   " >> $OUT_DIR/index.html
fi

if [ -f /opt/omni/sbin/omnidbutil ]; then
 echo "<A HREF=omni_db_info.html>DataBase Info</A> " >> $OUT_DIR/index.html
 echo "  \n</PRE>\n<HR>\n" >> $OUT_DIR/index.html
 echo "`_title Cell Info`
 `_cat_file /etc/opt/omni/cell/cell_info`
 `_footer`" > $FILE1
 echo "`_title Database Information`
 \n`/opt/omni/sbin/omnidbutil -info`
 `_footer`" > $FILE2
 fi

fi
}

function _y2k {
 echo "\t\t * Year 2000 Check\n"
MISSING_Y2K_PATCHES=TRUE
 FILE=$OUT_DIR/index.html
 echo "`_heading Year 2000`" >> $FILE
 if [ -f /usr/contrib/bin/y2k* ]; then
MISSING_Y2K_PATCHES=FALSE
if [ -f /usr/contrib/bin/y2koscheck ]; then
echo "Operating System related Y2K Information: `_create_link /usr/contrib/bin/y2koscheck -v`\n " >> $FILE
else
MISSING_Y2K_PATCHES=TRUE
echo "missing y2koscheck utility">> $FILE
fi
if [ -f /usr/contrib/bin/y2kappcheck ]; then
echo "Application related Y2K Information: `_create_link /usr/contrib/bin/y2kappcheck` " >> $FILE
else
MISSING_Y2K_PATCHES=TRUE
echo "missing y2appcheck utility">> $FILE
fi
 fi
if [ $MISSING_Y2K_PATCHES = "TRUE" ]; then
 echo "<center>WARNING!
 y2koscheck and / or
y2kappcheck utility not found!</center>\n
 Please apply Patch PHCO_17806 (y2koscheck - HP-UX 10.X); PHCO_17807
(y2koscheck - HP-UX 11.X); PHCO_20220 (y2kappcheck - HP-UX 10.X);
PHCO_20221 (y2kappcheck - HP-UX 11.X)
 or any subsequent Patch to enable this System for a Year 2000 Check.
 \nYou'll find this Patch (and others) @ the
 <A HREF=\"http://us-support.external.hp.com\">
 Americas and Asia-Pacific Electronic Support Center</A> or the
 <A HREF=\"http://europe-support.external.hp.com\">
 European Electronic Support Center</A>\n" >> $FILE
fi
echo "</PRE>\n<HR>\n" >> $FILE
}

function _x25 {
 if [ -f /usr/sbin/x25stat ]; then
 FILE=$OUT_DIR/x25.html
 echo "\t\t * X.25"
 _heading X.25 >> $OUT_DIR/index.html
 echo "<A HREF="x25.html">x25stat</A> " >> $OUT_DIR/index.html
 _title X.25 > $FILE
 for DEVICE_FILE in `ls /dev/x25_* /dev/zx25*`
 do
 _item $DEVICE_FILE
 /usr/sbin/x25stat -c -d $DEVICE_FILE
 echo "\n\n"
 done >> $FILE
 echo "</PRE>\n</BODY></HTML>" >> $FILE
 fi
}

### Network Node Manager Stuff ###

function _nnm {
 _title NNM Information
 echo "`_item NNM Version`\t`_nnmversion`
 `_item Objects in Database``$OV_BIN/ovobjprint -S| awk '/objects defined in the database/ && !/awk/ {print $1}'`
 <A HREF="nnm.conf">Config files</A>\t<A HREF="lrf.conf">Local Registration Files</A>\t<A HREF="ov.log">OV_LOG</A>\t<A HREF="ovpriv.log">OV_PRIV_LOG</A>
 \n<A HREF="ovstatus.html">ovstatus</A>  <A HREF="ovmap.html">Map's</A>  <A HREF="ovtopo.html">topology</A>
 \n`_cp_all_files $OV_LOG 0`
 `mv $OUT_DIR/log $OUT_DIR/ov.log`
 \n`_cp_all_files $OV_PRIV_LOG 0`
 `mv $OUT_DIR/log $OUT_DIR/ovpriv.log`
 `_item OV related Software installed:`
 \n`swlist -l product|grep OV|grep -v PHSS|sort`\n
 `_item OV related Patches installed:`
 \n`swlist -l product|grep OV|grep PHSS|sort`\n
 `_snmp`
 `_ovobjprint`
 \n</BODY></HTML>"
 _ovtopo > $OUT_DIR/ovtopo.html
 _mapinfo > $OUT_DIR/ovmap.html
 _nnm_conf_files
}

function _ito {
 _title OpenView ITO Information
 echo "`_item OpenView ITO Version`\t`_itoversion`
 `_item Objects in Database``$OV_BIN/ovobjprint -S| awk '/objects defined in the database/ && !/awk/ {print $1}'`
 <A HREF="nnm.conf">Config files</A>\t<A HREF="lrf.conf">Local Registration Files</A>\t<A HREF="ov.log">OV_LOG</A>\t<A HREF="ovpriv.log">OV_PRIV_LOG</A>
 \n<A HREF="ovstatus.html">ovstatus</A>  <A HREF="ovmap.html">Map's</A>  <A HREF="ovtopo.html">topology</A>

`_item OpenView ITO related Software installed:`
 \n`swlist -l product|grep -E 'ITO|OPC'|grep -v PHSS|sort`\n
 `_item OpenView ITO related Patches installed:`
 \n`swlist -l product|grep -E 'ITO|OPC'|grep PHSS|sort`\n
 `_itostatus`
 `_snmp`
 `_ovobjprint`
 \n</BODY></HTML>"
 _ito_conf_files
}

function _itostatus {
 echo "`_item OpenView ITO Status:`\n
 <PRE>\n`_item opcsv -status`\n\n`$OV_BIN/OpC/opcsv -status`</PRE>
 <PRE>\n`_item opcagt -status`\n\n`$OV_BIN/OpC/opcagt -status`</PRE>"
}

function _nnmindex {
 _heading OpenView NNM
 _item NNM Version:
 _nnmversion
 echo "<A HREF="nnm.html">NNM Information</A> "
}

function _itoindex {
 _heading OpenView ITO
 _item OpenView ITO Version:
 _itoversion
 echo "<A HREF="ito.html">OpenView ITO Information</A> "
}

function _licensing {
 echo "   <A HREF="ifor.html">License</A> " >> \
 $OUT_DIR/index.html
 _title Licensing \"Fun\"
 echo "\tPlease make sure that PHSS_8508 is installed, and, if you don't
 rely on floating licenses, consider switching to a nodelock'd license
 type, as this appears to be more robust.
 Starting with rev. 5.01 OpenView Network Node Manager will be delivered
 with a nodelock license as the default license, for almost all other
 products there's a chance to convert the floating license into a
 nodelocked license. The following products are currently eligible for
 converting: IT/A, IT/O, Omnistorage, NNM 4.x, DM 4.2, OPI 4.2/5.x,
 TMN 5.x, NetMetrix Load Monitor/NFS/Protocol Analayzer/Internetwork
 Monitor/Reporter/IRM.
 Contact your local Response Center for further details."
 _cat_file $OV_NODELOCK/nodelock
 _cat_file $OV_CONF/nnmlicense|grep -v "^#"
 I4LS_BIN=/opt/ifor/ls/os/hpux/bin
 echo "`_item what $I4LS_BIN/i4admin:`\n<PRE>
 `what $I4LS_BIN/i4admin`
 \n\n`_item $I4LS_BIN/i4target -v:`
 `$I4LS_BIN/i4target -v`
 \n\n`_item i4tv:`
 \n`$I4LS_BIN/i4tv`
 \n\n`_item i4lbfind:`
 \n`$I4LS_BIN/i4lbfind 2> $LOGFILE`
 \n\n`_item cat /etc/rc.config.d/iforls:`
 `cat /etc/rc.config.d/iforls|grep -v ^#`
 \n`_item cat /etc/rc.config.d/ncs:`
 \n`cat /etc/rc.config.d/ncs|grep -v ^#`"
 _footer
}

function _tmnindex {
 _heading OpenView
 _item TMN Version:
 _nnmversion
 echo "<A HREF="tmn.html">TMN Information</A>    
 <A HREF="nnm.html">NNM Information</A> "
}

function _nnm_conf_files {
        _copy_file $OV_CONF/ovwdb.auth nnm.conf
        _copy_file $OV_CONF/ovw.auth nnm.conf
        _copy_file $OV_CONF/oid_to_type nnm.conf
        _copy_file $OV_CONF/polling nnm.conf
        _copy_file $OV_CONF/ovsnmp.conf nnm.conf
        _copy_file $OV_CONF/snmpCol.conf nnm.conf
        _copy_file $OV_CONF/oid_to_sym/nnm.conf
        _copy_file $OV_CONF/C/oid_to_sym nnm.conf
        _copy_file $OV_CONF/C/filters nnm.conf
        if [ -f $OV_CONF/ovsuf ] ; then
                grep '^0:' $OV_CONF/ovsuf > $OUT_DIR/nnm.conf/ovsuf.out
        fi
        cp $OV_LRF/*.lrf $OUT_DIR/lrf.conf
}

function _ito_conf_files {
        _copy_file $OV_BIN/OpC/install/opcsvinfo nnm.conf
        _copy_file $OV_BIN/OpC/install/opcinfo nnm.conf
        _copy_file /var/opt/OV/conf/OpC/nodeinfo nnm.conf
        _copy_file $OV_CONF/OpC/mgmt_sv/opc.hosts nnm.conf
        _copy_file $OV_CONF/ovdbconf nnm.conf
        _copy_file /var/opt/OV/tmp/OpC/trace nnm.conf/ito.trace
        _copy_file /var/opt/OV/share/tmp/OpC/mgmt_sv/trace nnm.conf/ito.trace.mgmt
}

function _nnmversion {
 mkdir -p $OUT_DIR/nnm.conf
 mkdir -p $OUT_DIR/lrf.conf
 if [ -f $OV_BIN/ovnnmversion ];
 then
 $OV_BIN/ovnnmversion;
 elif [ -f $OV_BIN/ovw ];
 then
 what $OV_BIN/ovw | grep "HP OpenView"
 else
 # this shouldn't happen, neverever
 echo "no NNM installed, but ov.envvars.sh exists, why?";
 fi
}

function _itoversion {
        if [ -f $OV_BIN/OpC/opc ];
        then
                what $OV_BIN/OpC/opc | grep "HP OpenView"
        else
                # this shouldn't happen
                echo "no OpenView ITO installed";
        fi
}

function _snmp {
 echo "<PRE>\n`_item xnmsnmpconf -opt`\n`xnmsnmpconf -opt`</PRE>"
 if [ -f $OV_LOG/snmpCol.trace ]; then
 mv $OV_LOG/snmpCol.trace $OV_LOG/snmpCol.trace.old > /dev/null 2>&1
 fi
 snmpCollect -S > /dev/null 2>&1
 cp $OV_LOG/snmpCol.trace $OUT_DIR/nnm.conf
}

function _ovobjprint {
_item ovobjprint -S
echo "<PRE>\n`$OV_BIN/ovobjprint -S`\n</PRE>"
}

function _ovtopo {
 echo "`_title Topology`\n<PRE>
 \n`_item ovtopodump -l -v`\n\n`$OV_BIN/ovtopodump -l -v`\n
 \n`_item xnmtopoconf -print`\n\n`$OV_BIN/xnmtopoconf -print`\n</PRE>\n"
}

function _mapinfo {
 echo "`_title Map Information`\n<PRE>\n
 `_item ovwls -a -G`\n`ovwls -a -G`\n
 `_item ovmapdump -l -v`\n`ovmapdump -l -v`\n</PRE>\n"
}

### OV Telecom Stuff ###

function _tmn {
 _title TMN Information
 echo "`_item TMN Version:``_nnmversion`  
 <A HREF="lrf.conf">Local Registration Files</A>  
 <A HREF="ov.log">Log files</A>
 <A HREF="ovstatus.html">ovstatus</A>  
 <A HREF="osiconfcheck.html">osiconfcheck -bd</A>  
 <A HREF="ovsuf.html">ovsuf</A>  
 <A HREF="odbc.html">odbc.ini</A>  
 <A HREF="ovors.html">ovors</A>
 `_cat_file $OV_CONF/local_p_addr`
 `_item what pmd`\n<PRE>\n`what $OV_BIN/pmd`\n</PRE>
 `_item ovconftest`\n<PRE>`ovconftest`
  \n</BODY></HTML>"
 _ovors > $OUT_DIR/ovors.html
 _osiconfcheck > $OUT_DIR/osiconfcheck.html
 _ovsuf > $OUT_DIR/ovsuf.html
 _odbc > $OUT_DIR/odbc.html
}

function _odbc {
_title odbc.ini
_cat_file /.odbc.ini
}

function _ovsuf {
_title ovsuf
_cat_file $OV_CONF/ovsuf
}

function _osiconfcheck {
        _title osiconfchk -bd
        _item osiconfchk -bd
        osiconfchk -bd
        _item otsstat
        otsstat
}

function _ovstatus {
        _title ovstatus
        _item ovstatus
        $OV_BIN/ovstatus
}

function _ovors {
 echo "`_title ovors`\n`_cat_file $OV_CONF/ovors`
 `_item ovorsutil -s`\n<PRE>\n`ovorsutil -s`\n</PRE>\n
 `_item ovorsutil -h`\n<PRE>\n`ovorsutil -h`\n</PRE>\n"
}

### SNA ###

function _sna {
        SNA_BIN=/opt/sna/bin
        if [ -f $SNA_BIN/snapsysinfo ]; then
        VER=`what /stand/vmunix|grep SNA|awk '{print $3}'|sort -u`
        echo "\t\t * SNA"
        mkdir $OUT_DIR/SNA
        FILE=$OUT_DIR/SNA/index.html

_heading SNA >> $OUT_DIR/index.html
 echo "Version: $VER, <A HREF="SNA/index.html">more Info</A> ">> $OUT_DIR/index.html
 echo "`_title SNA`\n`what /stand/vmunix|grep -i sna`
 \n<A HREF="snapsysinfo.html">snapsysinfo</A>
 \n<A HREF="snaerr.html">Error and Audit files collected</A>
 \n<A HREF="snapconfig.html">snapconfig</A>\n" > $FILE
 _snapsysinfo > $OUT_DIR/SNA/snapsysinfo.html
 _snapconfig > $OUT_DIR/SNA/snapconfig.html
 _snaerr > $OUT_DIR/SNA/snaerr.html
 echo "\n\n</PRE>\n</BODY></HTML>" >> $FILE
 fi
}

function _snapsysinfo {
_title snapsysinfo
$SNA_BIN/snapsysinfo
}

function _snaerr {
        _title SNAerrors
        _item /var/opt/sna/sna.aud
        cat /var/opt/sna/sna.aud
        _item /var/opt/sna/sna.err
        cat /var/opt/sna/sna.err
        _footer
}

function _snapconfig {
 _title snapconfig
 if [ -f $SNA_BIN/snaptextcfg ]; then
 $SNA_BIN/snaptextcfg
 else
 cat /etc/opt/sna/sna_node.cfg
 echo "`_item sna_domn.cfg`"
 cat /etc/opt/sna/sna_domn.cfg
 fi
 _footer
}

function _sg {
 if [ -f /usr/sbin/cmviewcl ]; then
 echo "\t\t * Service Guard"
 mkdir $OUT_DIR/SG
 FILE=$OUT_DIR/SG/index.html
 _heading ServiceGuard >> $OUT_DIR/index.html
 echo "Version: `swlist -l product|grep \"^ ServiceGuard\"|awk '{print $2}'`, <A HREF="SG/index.html">more
 Information</A> \n\n" >> $OUT_DIR/index.html
 echo "`_title ServiceGuard`\n`what /stand/vmunix|grep -i service`
 \n<A HREF="sgnetstat.html">netstat information</A>    <A HREF="sgservices.html">SG Entries in /etc/services</A>
 \ncm commands:
 \n<A HREF="cmviewcl.html">cmviewcl</A>    <A HREF="cmgetconf.html">cmgetconf</A>    <A HREF="cmscancl.html">cmscancl</A>\n\n\n\n\n\n`_item /etc/rc.config.d/cmcluster`
 \n`cat /etc/rc.config.d/cmcluster``_footer`" > $FILE
 echo "`_title Netstat Information`
 `_item netstat -a | grep hacl``_item netstat -a`
 \n`netstat -a | grep hacl`" > $OUT_DIR/SG/sgnetstat.html
 if [ $OS -eq 10 ]; then
 echo "`_item netstat -AAA`
 \n`netstat -AAA`" >> $OUT_DIR/SG/sgnetstat.html
 fi
 echo "`_title hacl entries in /etc/services`
 `_item grep hacl /etc/services`
 \n`grep hacl /etc/services`" > $OUT_DIR/SG/sgservices.html
 echo "`_title cmviewcl`
 `_item cmviewcl`
 \n`cmviewcl -v`" > $OUT_DIR/SG/cmviewcl.html
 echo "`_title cmgetconf`
 `_item cmgetconf`
 \n`cmgetconf -v`"> $OUT_DIR/SG/cmgetconf.html
 echo "`_title cmscancl`
 `_item cmscancl`\n\n
 \n`cmscancl`\n\n\n`_cat_file /tmp/scancl.out"> $OUT_DIR/SG/cmscancl.html
 fi
}

function _java {
_title Java Installation
_item Java Revision
_javaversion
_item swlist | grep -i java
swlist | grep -i java
swlist -l product | grep -i java
swlist -l product | grep -i java
_footer
}

function _javaversion {
echo " `swlist | grep -i java | awk '{print $2}'` "
echo " <A HREF=environment.html>Environment variables</A> "
}

##########################################
# Storage and Fibre Channel Information #
##########################################

function _fibre_channel {
if [ -f /opt/fcms/bin/fcmsutil ]; then
echo "\t\t * Fibre Channel"
_heading Fibre Channel >> $OUT_DIR/index.html
 FILE=$OUT_DIR/fc.html
 echo "<A HREF="fc.html">Information</A> \n\n<HR>" >> $OUT_DIR/index.html
 echo "`_title Fibre Channel`
\n `_item Information about installed FC Adapters`
Kernel driver version:\n`$UBIN/what /stand/vmunix|grep fcms`\n " > $FILE
for i in /dev/fcms* /dev/td*
do
 echo "\n \nfcmsutil $i \n" >> $FILE
 /opt/fcms/bin/fcmsutil $i >> $FILE
done
_footer >> $FILE
fi
}

##########################################
# #
# #
# OCMP Telecom Infrastructure Division #
# #
# #
##########################################

function _ocmpindex {
 _heading OpenCall Media Platform
 _item OpenCall Media Platform Version
 echo " "
 _ocmpversion
 echo " 
 <PRE>
 `ioscan -fn| grep Description`
 `ioscan -fn| grep ===========`
 `ioscan -fn| grep sonet`
 </PRE>"
 echo "<A HREF="ocmp.html">OpenCall Media Platform Information</A> "
}

function _ocmpversion {
 if [ -f $OOB/OCMedia ];
 then
 echo "`swlist| grep -i netaction | awk '{print $2}'`"
 else
 echo "OpenCall not installed with netaction depots"
 fi
}

function _ocmpsoft {
_title OpenCall Software Information
_item OpenCall Media Platform Version:
_ocmpversion
echo "<HR>"
_item OpenCall related Software installed:
swlist |grep -i OC | grep -v Patch |sort
echo "<HR>"
_item OpenCall related Patches installed:
swlist | grep -i OC | grep -i Patch |sort
_footer
}

function _ocmplist {
 echo "<A NAME=\"_lind\">"
 _title OCMP Directory listings
 echo "<A HREF=\"#_loO\">/opt/OCMP</A> "
 echo "<A HREF=\"#_eoO\">/etc/opt/OCMP</A> "
 echo "<A HREF=\"#_voHP\">/var/opt/HP-AIN</A> <HR>"

 echo "<A NAME=\"_loO\">"
 _item /opt/OCMP/
 ls -laR /opt/OCMP/
 echo "<HR>"

 echo "<A HREF=\"#_lind\">top</A> "
echo "<A NAME=\"_eoO\">"
_item /etc/opt/OCMP/
ls -laR /etc/opt/OCMP/
echo "<HR>"

echo "<A HREF=\"#_lind\">top</A> "
echo "<A NAME=\"_voHP\">"
 _item /var/opt/HP-AIN/
 ls -laR /var/opt/HP-AIN/

 echo "<A HREF=\"#_lind\">top</A> "
_footer
}

function _ocmpproc {
_title Processes
_item ps tree
export UNIX95=1
ps -H -ef |grep -v $MYTTY
export UNIX95=0
_item top
top -d1 | strings | grep -v 4b
_item Uptime
uptime
_footer
}

function _ocmpconf {
FILE=$OUT_DIR/ocmpconf.html
echo "<A HREF=ocmpconf.html>OCMP Configuration</A> "
echo "`_title OpenCall Software Configuration Information`" > $FILE
 echo "
 Initial configuration setup, Color, LPC, Default XML files.\n
 <A HREF=ocmpsetup.html>Installation Configuration</A> 

 OpenCall related software installed.\n
 <A HREF=ocmpsoft.html>OC Software</A> 

 User XML configuration and properties files\n
 <A HREF=ocmpuser.html>User Defined Configuration</A> 

 OCMP directory listings\n
 <A HREF=ocmplist.html>Directory Listing</A> 

 System /etc/services\n
 <A HREF=services.html>/etc/services</A> 

 Active internet connections $ netstat $ \n
 <A HREF=netstat.html>netstat</A> 

 Dynamically Loadable Kernel Module Status\n
 <A HREF=kmadmin_-s.html>kmadmin -s</A> 

 Platform trace and log files\n
<A HREF=ocmptrace.html>Logs and Trace files</A> 

 Java Software\n
<A HREF=java.html>Java Software</A> 

Running Processes\n
<A HREF=ocmpproc.html>Running Processes</A> 
</BODY></HTML>"
>> $FILE
}

function _ocmpinfo {
_title OCMP Information

if [ -f /etc/opt/OCMP/OCMP.setup ]; then
LPC=`cat /etc/opt/OCMP/OCMP.setup | grep ISUP_LPC | cut -d"=" -f2`
_item Local Point Code:
echo "$HOST : lpc : $LPC "
fi

 _title2 Software Configuration
 _item OCMP Installed Version:
 echo " "
 _ocmpversion
 _ocmpconf
echo " "

_title2 Hardware
 _item ioscan -fnC sonet
 ioscan -fnC sonet
 echo " "

 _title2 tmcDiag
 if [ -f $OOB/SonetSDHCardIsRunning ]; then
 echo "Note: SonetSDHCardIsRunning"
 echo "Not executing tmcDiag "
 else
 echo "Note: The SonetSDHCard NOT running "
 echo "It is safe to tmcDiag "

_item tmcDiag

for CARD in `ioscan -fnCsonet|grep -v "==="|grep -v dev|grep -v Driver|awk '{print $2}'`
 do
 echo "Sonet Card Instance: $CARD "
 /opt/OCMP/bin/tmcDiag -M $CARD
 echo "<HR>"
 done
 fi
 echo ""
 _footer
}

function _ocmpcollectconf {
 ll /etc/opt/OCMP/Network/Global/*.xml> /tmp/listing_of_xml_config_files
FILE1=$OUT_DIR/ocmpsetup.html
 FILE2=$OUT_DIR/ocmpuser.html
 FEBE=`cat /etc/opt/OCMP/OCMP.runinfo|grep SS7_FEBE_TYPE|cut -d"=" -f2`

echo "`_title OpenCall Software Configuration`
 `_cat_file /etc/opt/OCMP/OCMP.runinfo`
 `_cat_file /etc/opt/OCMP/OCMP.setup`" > $FILE1
 echo "`_title2 OCMP.properties`\n" >> $FILE1
 echo " /etc/opt/OCMP/<A HREF=ocmpproperties.html>OCMP.properties html format</A> " >> $FILE1
 echo "`_footer`" >> $FILE1
 echo "`_title OpenCall User Configuration`
 `_item XML Config`
 <A HREF=OCMP>Platform configuration : /etc/opt/OCMP/</A>\n"> $FILE2

 if [[ $FEBE = "SingleHost" ]]; then
 echo "`_title2 FTC: SingleHost Configuration`\n
 `_cat_file /etc/opt/OCMP/ocmp_ftc.conf`" >> $FILE2
 else
 echo "`_title2 FTC: FEBE Configuration`\n
 `_cat_file /etc/opt/OCMP/ocmp_be_ftc.conf`" >> $FILE2
 fi

 echo "\n`_cat_file /tmp/listing_of_xml_config_files`\n">> $FILE2
 rm /tmp/listing_of_xml_config_files
 echo "`_footer`" >> $FILE2
}

function _ocmptrace {
ISUPCOLOR=`cat /etc/opt/OCMP/OCMP.setup|grep OC_MEDIA_ISUP_COLOR|cut -d"=" -f2`
_title OpenCall Traces and Logs

if [[ $ISUPCOLOR = "ANSI" ]]
then
_title2 ANSI ISUP Variant
 _item Trace mode: initANSIIsupOCMedia.bsh
 echo "The following setting determines the following logging: 
 a\) nettl traces and logs 
 b\) traces and logs on the stdout "
 cat /etc/opt/OCMP/initANSIIsupOCMedia.bsh | grep TracerConfig
 elif [[ $ISUPCOLOR = "ITU" ]]; then
 _title2 ITU ISUP Variant
 echo "The following setting determines the following logging: 
 a\) nettl traces and logs 
 b\) traces and logs on the stdout "
 _item Trace mode: initITUIsupOCMedia.bsh
 cat /etc/opt/OCMP/initITUIsupOCMedia.bsh | grep TracerConfig
 else
 _item ISUP Color
 echo "ERROR: Unrecognised ISUP Variant: $ISUPCOLOR "
 fi

 _title2 nettl traces
 echo " "
 echo "/var/opt/HP-AIN/ttl/<A HREF=ocmptrc.html>trace.TRC0</A>"
 echo " "
 echo "/var/adm/<A HREF=netfmt.html>nettl.LOG00</A>"

_title2 LOG.OCMP
echo "The stdout and stderr output redirections : "
if [ -f /tmp/LOG.OCMP.1 ]; then
 _collect_file LOG.OCMP.1 /tmp/LOG.OCMP.1
else
 echo "NOTE: File not Found: /tmp/LOG.OCMP.1 "
fi
 if [ -f /tmp/LOG.OCMP.2 ]; then
 _collect_file LOG.OCMP.2 /tmp/LOG.OCMP.2
else
 echo "NOTE: File not Found: /tmp/LOG.OCMP.2 "
fi
_footer
}

function _ocmpprop {
if [ -f /etc/opt/OCMP/OCMP.properties ]; then
PROPFILE=$OUT_DIR/OCMP/OCMP.properties
TMP=$OUT_DIR/propertiestmp.tmp

if [ -d $OUT_DIR/OCMP/ ]; then
 echo ""
else
 echo "making $OUT_DIR/OCMP/ "
 mkdir $OUT_DIR/OCMP/
fi

if [ -f $OUT_DIR/OCMP/OCMP.properties ]; then
 echo ""
else
 echo "Copying OCMP.properties to $OUT_DIR/OCMP/ "
 cp -p /etc/opt/OCMP/OCMP.properties $OUT_DIR/OCMP/
fi

cat /etc/opt/OCMP/OCMP.properties|grep file|grep -v webserver|grep config>$OUT_DIR/ocmptmp.tmp
 _title /etc/opt/OCMP/OCMP.properties > $TMP
 echo "<PRE>" >> $TMP
 cat /etc/opt/OCMP/OCMP.properties >> $TMP
 echo "</PRE>" >> $TMP
 _footer >> $TMP

for F in $(cat $OUT_DIR/ocmptmp.tmp)
do
VAL1=`echo $F | cut -d"=" -f1`
OLD=`echo $VAL1 | sed "s/\//\\\//g"`
VAL2=`echo $F | cut -d"=" -f2`
VAL3=`echo $VAL2 | sed "s/\/etc\/opt\///g"`
VAL4="<A HREF=$VAL3>$VAL2</A>"
#VALZ3=`echo $VAL4 | sed "s/\//\\\//g"`
NEW="${VAL4}"
sed "s;$VAL2;$NEW;g" $TMP > $OUT_DIR/properties.ocmp
mv $OUT_DIR/properties.ocmp $TMP
done

VAL1="<A HREF=OCMP/initITUIsupOCMedia.bsh>/etc/opt/OCMP/initITUIsupOCMedia.bsh</A>"
sed "s;"/etc/opt/OCMP/initITUIsupOCMedia.bsh";$VAL1;g" $TMP> $OUT_DIR/properties.ocmp
mv $OUT_DIR/properties.ocmp $TMP
mv $TMP $OUT_DIR/ocmpproperties.html
rm $OUT_DIR/ocmptmp.tmp
 else
 echo "<HTML><BODY> ERROR: File not Found: /etc/opt/OCMP/OCMP.properties </BODY></HTML>" > $TMP
 mv $TMP $OUT_DIR/ocmpproperties.html
 fi
}

function _ocmptrc {
if [ -f /var/opt/HP-AIN/ttl/trace.TRC0 ]; then
 _title netfmt -f /var/opt/HP-AIN/ttl/trace.TRC0
 _item /var/opt/HP-AIN/ttl/trace.TRC0
 /usr/sbin/netfmt -f /var/opt/HP-AIN/ttl/trace.TRC0
 _footer
 else
 echo " NOTE: File not Found: /var/opt/HP-AIN/ttl/trace.TRC0 "
 fi
}

function _ocmpxml {
#parsing the xml for ie viewing
typeset OLD='encoding="US-ASCII"'
typeset NEW=' '
for F in $OUT_DIR/OCMP/Network/Global/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v 'DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done
typeset OLD='encoding="US-ASCII"'
typeset NEW=' '
for F in $OUT_DIR/OCMP/Network/Empty/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v 'DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done

OLD='encoding="US-ASCII"'
NEW=' '
for F in $OUT_DIR/OCMP/Services/Global/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v 'DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done
typeset OLD='encoding="US-ASCII"'
typeset NEW=' '
for F in $OUT_DIR/OCMP/Services/Empty/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v '^<!DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done

typeset OLD='encoding="US-ASCII"'
typeset NEW=' '
for F in $OUT_DIR/OCMP/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v '^DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done
typeset OLD='encoding="US-ASCII"'
typeset NEW=' '
for F in $OUT_DIR/OCMP/*.xml
do
echo "" >> $F;echo "" >> $F;echo "" >> $F;echo "" >> $F
sed "s/$OLD/$NEW/g" $F > ${F}.tmp
grep -v 'DOCTYPE' ${F}.tmp > $F
rm $F.tmp
done

echo "\n\tOCMP xml files processed for ie\n"
}

_init $*
echo '\007\c'

你可能感兴趣的:(系统信息,machinfo,nickel)

600条最强 Linux 命令总结（非常详细）零基础入门到精通，收藏这一篇就够了网安导师小李程序员编程网络安全 linux 运维服务器学习 web安全 python java
一、基本命令uname-m显示机器的处理器架构uname-r显示正在使用的内核版本dmidecode-q显示硬件系统部件(SMBIOS/DMI)hdparm-i/dev/hda罗列一个磁盘的架构特性hdparm-tT/dev/sda在磁盘上执行测试性读取操作系统信息arch显示机器的处理器架构uname-m显示机器的处理器架构uname-r显示正在使用的内核版本dmidecode-q显示硬件系统部
阿里云 LAMP环境配置（centos7.6+apache+mysql5.7+php7.3.4）坚持到底就能逆袭 linux linux apache centos 服务器运维
在安装配置环境的时候遇到了些问题，网上的基本没有一篇就能跟着做完的，所以自己也整理了一下，从开始安装到完成查询的一些资料，如果这篇文章能帮到你，我真的很高兴！！查看系统信息cat/etc/redhat-releaseuname-a安装apache参考这篇：用yum快速搭建LAMP平台安装mysql5.7先参考这篇卸载原来的mariadb：阿里云（Linux）Centos7上安装Mysql5.7步骤
【全网超详细】常用的 Windows CMD（命令提示符）指令合集 Wit's blog c++python pyqt scrapy scikit-learn dash scipy
以下整理了一份【全网超详细】常用的WindowsCMD（命令提示符）指令合集，并对其功能、常见用法及示例进行了分类与说明。希望能帮助你在日常或专业环境下快速定位和使用所需命令，提高工作与学习效率。为方便查阅，本篇会按照文件管理类、系统信息与网络类、进程与服务类、磁盘与系统维护类等主题进行梳理，每条命令配有简单示例及常见参数介绍。一、文件管理类指令1.dir功能：列出指定目录下的文件与子目录信息。常
Linux和gcc/g++常用命令总结石油人单挑所有 Linux系统编程 linux 运维服务器网络数据库 ubuntu centos
目录Linux命令总结文件操作相关命令lscdpwdcpmvrmcatmkdirrmdirtouch文本处理操作命令grepawksed进程管理操作相关命令pstophtopkillpkillkillallchmodchown网络操作相关命令pingifconfignetstatsslsofcurlwgetssh端口操作相关命令nmap系统信息查看相关命令unamedfdufree查看CPU和内存
计算机网络查看命令大全,Windows下查看电脑信息的常用命令整理 weixin_39796152 计算机网络查看命令大全
Windows下查看电脑信息的命令查看当前ip:cmd----->ipconfig/all查看电脑配置---->dxdiag查看注册表信息---->regedit查看系统属性---->sysdm.cpl查看系统信息---->msinfo32查看网络nbtstat-aAna远程主机的名称，便可知NETBIOSA远程主机的ip便可知NETBIOSn列出本地主机的NETBIOS查看网络状态netstat
ubuntu查看电脑配置信息思禾 Linux linux cpu ubuntu
1、查看电脑是32位还是64位：getconfLONG_BIT2、查看系统信息(包括系统版本)lsb_release-a或者：cat/etc/lsb-release3、查看系统架构Uname4、获取ubuntu版本：cat/etc/issue5、图形化界面查看硬件信息：cpu、mem安装：sudoapt-getinstallhardinfo执行：hardinfo6、查看cpu信息：cat/proc
《工业控制系统网络安全防护指南》｜安全运营 VEDA 卫达信息网络安全
《工业控制系统网络安全防护指南》工业控制系统作为工业生产运行的基础核心，其网络安全事关企业运营和生产安全、产业链供应链安全稳定、经济社会运行和国家安全。随着工业企业数字化转型步伐加快，工业控制系统开放互联趋势明显，工业企业面临的网络安全风险与日俱增，工业企业加强网络安全防护需求迫切。2016年，工业和信息化部出台《工业控制系统信息安全防护指南》，对有效指导工业企业开展工控安全防护工作发挥了积极作用
【数据分析】R语言的广义线性混合模型（GLMM）分析案例生信学习者1 数据分析数据分析 r语言数据挖掘数据可视化
禁止商业或二改转载，仅供自学使用，侵权必究，如需截取部分内容请后台联系作者!文章目录介绍原理步骤加载R包数据下载导入数据数据预处理成对相关性GLMMs标准化数据字符向量转换成因子化变量构建模型FishesAmphibiansReptilesBirdsMammals画图总结系统信息介绍广义线性混合模型（GeneralizedLinearMixedModels,GLMM）是一种统计模型，用于分析具有非
springboot527基于Java企业项目管理系统(论文+源码)_kaic 开心毕设数据库 rabbitmq kafka
摘要如今社会上各行各业，都喜欢用自己行业的专属软件工作，互联网发展到这个时候，人们已经发现离不开了互联网。新技术的产生，往往能解决一些老技术的弊端问题。因为传统企业项目管理系统信息管理难度大，容错率低，管理人员处理数据费工费时，所以专门为解决这个难题开发了一个企业项目管理系统，可以解决许多问题。企业项目管理系统按照操作主体分为管理员和用户。管理员的功能包括操作日志管理、字典管理、论坛管理、公告管理
探寻 Hutool - System：开启系统信息便捷获取之旅五行星辰业务系统应用技术 java 后端
Hutool-System：系统参数调用封装（JVM信息等）一、简介在Java开发中，有时需要获取系统的相关信息，例如JVM的配置信息、操作系统信息、用户信息等。Java本身提供了一些API来获取这些信息，但使用起来较为分散和复杂。Hutool-System模块对这些系统参数的调用进行了封装，提供了统一、便捷的接口，让开发者可以更轻松地获取各种系统信息。二、引入依赖如果你使用Maven项目，在po
Anaconda配置tensorflow-gpu教程 rubisco214 tensorflow 人工智能 python
最近在入门tensorflow深度学习，配置环境吃了不少苦头，写个完整的教程首先得在自己主机上装cuda（我之前就是主机上没装cuda,只在虚拟环境里面装了，结果jupyter里面怎么调都识别不到GPU）打开Nvidia控制面板，左上角帮助-系统信息-组件NVCUDA64.DLL后面的NVIDIACUDA12.1就是你的显卡支持的CUDA版本，去CUDA官网CUDAToolkitArchive|N
Linux 测试必须知道的命令那片海还在吗 test linux
Linux测试必须知道的命令一、系统信息查看命令1.1uname-查看系统基本信息作用：用于显示系统的相关信息，如内核名称、主机名、内核版本等。常用参数及示例-a：显示所有信息。uname-a#输出示例：Linuxtest-server5.4.0-109-generic#123-UbuntuSMPFriApr2116:52:16UTC2023x86_64x86_64x86_64GNU/Linux1
安装CUDA以及GPU版本的pytorch lskkkkkkkkkkkk Python pytorch 人工智能 python
使用pytorch进行深度学习的时候，往往想用GPU进行运算来提高速度。于是搜索便知道了CUDA。下面给出一个自检的建议：检查cuda的版本是否适配自己的GPU。打开NVDIA控制面板，点击左下角“系统信息”，然后就可以看到NVDIAGPU的详细信息，其中就包含了CUDA的版本。在官网安装合适版本的cuda-toolkit。安装了cuda，但是命令行输入nvcc-V报错显示没有nvcc这时候可能没
网络安全-系统层攻击流程及防御措施星河776(重名区分) 网络安全 web安全安全
系统层攻击流程涉及多个阶段，攻击者通过逐步渗透以获取控制权或窃取数据。以下是详细的流程及防御措施：1.侦察（Reconnaissance）信息收集：主动扫描：使用工具如Nmap、Masscan扫描目标IP、开放端口、服务版本。被动侦察：通过公开资源（Shodan、Censys）或DNS记录获取系统信息。漏洞匹配：比对CVE、Exploit-DB等数据库，寻找已知漏洞（如ApacheLog4j漏洞）
Linux常见命令汇总（2025最新版）浪子西科 Linux linux chrome 运维
Linux常见命令汇总（2025最新版）文章目录Linux常见命令汇总（2025最新版）**一、文件与目录操作****二、文件权限与属性****三、系统信息与管理****四、网络相关****五、压缩与解压****六、用户与权限****七、软件包管理****八、快捷键与技巧****九、文本处理与编辑****十、系统监控与调试****十一、计划任务与后台管理****十二、磁盘与分区管理****十三、高
Linux题库100道(附答案) 是谁谁谁一起学Linux linux 运维服务器安全 centos
1.cron后台常驻程序(daemon)用于：A.负责文件在网络中的共享B.管理打印子系统C.跟踪管理系统信息和错误D.管理系统日常任务的调度2.在大多数Linux发行版本中，以下哪个属于块设备(blockdevices)？A.串行口B.硬盘C.虚拟终端D.打印机3.下面哪个Linux命令可以一次显示一页内容？A.pauseB.catC.moreD.grep4.怎样了解您在当前目录下还有多大空间？
Python 标准库：os——操作系统接口骑个小蜗牛 Python python
文章目录模块介绍主要函数文件和目录操作环境变量操作路径操作系统信息进程管理注意事项总结模块介绍os模块是Python标准库的一部分，提供了与操作系统交互的功能，允许我们执行操作系统相关的任务，比如文件操作、进程管理、环境变量操作等。这个模块帮助Python程序与操作系统进行低层次的交互，无论是在Linux、Windows还是macOS系统上，os模块都能提供统一的接口来进行操作。主要函数文件和目录
【数据分析】通过个体和遗址层面的遗传相关性网络分析生信学习者1 数据分析数据分析数据挖掘 r语言数据可视化
禁止商业或二改转载，仅供自学使用，侵权必究，如需截取部分内容请后台联系作者!文章目录介绍原理应用场景加载R包数据下载函数个体层面的遗传相关性网络分析导入数据数据预处理构建遗传相关性的个体网络对个体网络Nij进行可视化评估和选择最佳模型评估和选择最佳模型最佳模型进行总结拟合优度检验遗址层面的遗传相关性网络分析导入数据数据预处理构建遗址之间的遗传相关性网络可视化图条件边预测与模型评估总结系统信息介绍个
Linux下部署MySQL8.0集群 - 一主两从模式(主从复制) ꯭ 瞎꯭扯꯭蛋꯭ Mysql 服务器部署 linux mysql
目录一、部署前准备1、查看系统信息#查看系统版本cat/etc/red*#查看系统位数getconfLONG_BIT[root@localhost~]#cat/etc/red*CentOSLinuxrelease7.5.1804(Core)[root@localhost~]#getconfLONG_BIT642、下载对应安装包进入MySQL官网：https://dev.mysql.com/down
如何查看自己电脑是什么架构 F—— 运维学习运维安全
1.win+R打开运行，输入msinfo32，回车。2.弹出系统信息面板，“系统类型”显示架构类型；如果显示“基于x64的电脑”，则你的操作系统是64位的，通常对应的是AMD架构；如果显示“基于ARM的电脑”，则你的操作系统是ARM架构的。
5G NR 基本概念——BWP 冯白丁 5G NR 2/3/4/5g 网络通信
BWP：BandWidthPart部分带宽定义：给定μ值（确定子载波间隔）的一段连续的CRB作用优势：降低能耗，业务量小时，UE切换至带宽较小的BWP上提高系统灵活性，每个BWP可以采用不同的配置，根据业务切换合适的BWP前兼容，新技术可在新的BWP中提供，保证系统向前兼容分类：初始BWP:用于空闲态UE接收系统信息并完成随机接入。子载波间隔与频域位置及带宽MIB携带专用BWP：用于连接态UE数据
Linux入侵检查流程 jerry-89 LINUX linux php 服务器
1.初步信息收集1.1系统信息•目的：了解当前系统的基本情况，包括操作系统版本、内核版本等。•命令：#查看操作系统发行版信息cat /etc/os-release#查看内核版本uname -r1.2网络信息•目的：查看网络连接状态、开放端口以及防火墙规则，排查异常网络活动。•命令：#查看当前网络连接netstat-tulnp#查看防火墙规则（以iptables为例）iptables-L-n-v2.
Linux入门自学笔记（三）Ubuntu终端操作shell命令 ekil215 Linux自学笔记笔记 linux ubuntu
此笔记作为本人小白的自学笔记，仅供参考，如有错误，欢迎批评指正~因为是小白入门，所以一些语句和解释偏白痴，啰嗦（提前叠甲）计划后期学习过程中，用到的新的命令都更新到此笔记~注：1.本文引号均为标注作用，实际命令操作中没有引号''2.尽量不要不在切换到root模式运行命令，如果有需要，命令前加sudo执行目录目录信息查看命令目录切换命令显示当前路径系统信息查看命令清零显示文件内容切换用户使用root
Linux操作系统：基础与文件系统结构研究暮雨哀尘 Linux的那点事 linux 网络网络安全嵌入式服务器文件系统权限
Linux系统基础与文件系统结构研究摘要本文深入探讨了Linux操作系统的常用命令、文件系统结构及其层次标准（FHS），并结合实际应用场景，详细分析了文件和目录操作、文件查看、系统信息查看以及用户和权限管理等核心功能。通过对Linux文件系统层次结构标准的深入剖析，阐述了根目录及其子目录的作用，并通过实验验证了常用命令的实际应用效果。本文旨在为Linux初学者提供一个全面的入门指南，同时也为有一定
【深度学习】无Linux管理员权限，照样可以安装CUDA 土豆炒马铃薯。 Linux CUDA 深度学习 linux 服务器深度学习 pytorch
以下演示内容使用CUDA版本为CUDA11.71、官网官网：CUDA官网下载地址这里会列出所有的CUDA版本，选择需要的版本即可。2、查看系统信息这里分享三个命令，可以查看Linux系统的配置信息，方便下一步下载合适的CUDA版本。可以根据这些命令输出的系统配置信息选择相应的CUDA版本。uname-alsb_release-acat/etc/*release我觉得第三个最好用，输出的信息比较全面
【Python深入浅出】Python3中os模块：开启系统交互的万能钥匙奔跑吧邓邓子 Python深入浅出 python 交互 OS
目录一、引言：os模块初印象二、os模块基础操作2.1文件与目录操作2.1.1创建操作2.1.2读取操作2.1.3删除操作2.1.4信息获取2.2系统信息获取与环境变量管理2.2.1系统信息获取2.2.2环境变量管理2.3进程管理与工作目录操作2.3.1进程管理2.3.2工作目录操作三、os模块使用进阶3.1路径处理技巧3.1.1路径拼接与分割3.1.2路径判断与信息获取3.2与其他模块的协同工作
ReentrantLock/内存溢出监控一只蜘猪每日收获总结今日总结
JVM内存溢出内存泄漏在java中如果不再使用一个对象，但是该对象依然在GCROOT引用链尚，这个对象就不会被垃圾回收器回收，这种情况就成为内存泄露内存溢出当持续发生内存泄漏直到内存被消耗完就会导致内存溢出监控工具Top命令top命令是linux下用来查看系统信息的一个命令，它提供给我们去实时地去查看系统的资源，比如执行时的进程、线程和系统参数等信息。进程使用的内存为RES（常驻内存）SHR（共享
Linux系统面经 MySGDLife Linux与网络编程 linux
文章目录常用命令如何结束进程名为aaa的进程？常用命令文件和目录操作命令：ls、cd、mkdir、pwd、cp、mv、rm文件内容查看和编辑命令：cat、tail、less、more、head、vi系统信息查看命令：ps、top、free、df、du用户和权限管理命令：chmod网络相关命令：tcpudmp、ifconfig、ping、netstat、wgetpwd:显示当前文件路径。cp：用于复
JVM致命错误日志详解「已注销」 JAVA jvm java
文章目录文件描述文件位置文件头错误信息记录JVM运行信息崩溃原因错误信息线程描述线程信息信号信息计数器信息机器指令内存映射信息线程堆栈其他信息进程描述线程列表虚拟机状态互斥锁/管程堆概览卡表和本地代码缓存编译事件GC事件逆向优化事件内部错误事件内存信息虚拟机参数和环境变量信号处理器系统信息操作系统内存信息CPU信息总结最近一段时间生产环境频繁出问题，每次都会生成一个hs_err_pid*.log文
[GaussDB] GaussDB数据库基础函数介绍-上 jerrywangcsdn gaussdb 数据库
目录一、函数在数据库中的作用二、GaussDB常用基础函数介绍与示例1、数字操作函数2、时间和日期处理函数3、类型转换函数4、数组函数5、范围函数6、窗口函数7、聚集函数8、安全函数9、系统信息函数10、动态脱敏函数.Tip：由于篇幅缘故，“5.范围函数、6.窗口函数、7.聚集函数、8.安全函数、9.系统信息函数、10.动态脱敏函数”部分内容见下一篇《GaussDB数据库基础函数介绍-下》前言函数
遍历dom 并且存储（将每一层的DOM元素存在数组中）换个号韩国红果果 JavaScript html
数组从0开始！！ var a=[],i=0; for(var j=0;j<30;j++){ a[j]=[];//数组里套数组，且第i层存储在第a[i]中 } function walkDOM(n){ do{ if(n.nodeType!==3)//筛选去除#text类型 a[i].push(n); //con
Android+Jquery Mobile学习系列(9)-总结和代码分享白糖_ JQuery Mobile
目录导航经过一个多月的边学习边练手，学会了Android基于Web开发的毛皮，其实开发过程中用Android原生API不是很多，更多的是HTML/Javascript/Css。个人觉得基于WebView的Jquery Mobile开发有以下优点： 1、对于刚从Java Web转型过来的同学非常适合，只要懂得HTML开发就可以上手做事。 2、jquerym
impala参考资料 dayutianfei impala
记录一些有用的Impala资料 1. 入门资料 >>官网翻译： http://my.oschina.net/weiqingbin/blog?catalog=423691 2. 实用进阶 >>代码&架构分析： Impala/Hive现状分析与前景展望：http
JAVA 静态变量与非静态变量初始化顺序之新解周凡杨 java 静态非静态顺序
今天和同事争论一问题，关于静态变量与非静态变量的初始化顺序，谁先谁后，最终想整理出来！测试代码： import java.util.Map; public class T { public static T t = new T(); private Map map = new HashMap(); public T(){ System.out.println(&quo
跳出iframe返回外层页面 g21121 iframe
在web开发过程中难免要用到iframe，但当连接超时或跳转到公共页面时就会出现超时页面显示在iframe中，这时我们就需要跳出这个iframe到达一个公共页面去。首先跳转到一个中间页，这个页面用于判断是否在iframe中，在页面加载的过程中调用如下代码： <script type="text/javascript"> //<!-- function
JAVA多线程监听JMS、MQ队列 510888780 java多线程
背景：消息队列中有非常多的消息需要处理，并且监听器onMessage（）方法中的业务逻辑也相对比较复杂，为了加快队列消息的读取、处理速度。可以通过加快读取速度和加快处理速度来考虑。因此从这两个方面都使用多线程来处理。对于消息处理的业务处理逻辑用线程池来做。对于加快消息监听读取速度可以使用1.使用多个监听器监听一个队列；2.使用一个监听器开启多线程监听。对于上面提到的方法2使用一个监听器开启多线
第一个SpringMvc例子布衣凌宇 spring mvc
第一步：导入需要的包；第二步：配置web.xml文件 <?xml version="1.0" encoding="UTF-8"?> <web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi=
我的spring学习笔记15-容器扩展点之PropertyOverrideConfigurer aijuans Spring3
PropertyOverrideConfigurer类似于PropertyPlaceholderConfigurer，但是与后者相比，前者对于bean属性可以有缺省值或者根本没有值。也就是说如果properties文件中没有某个bean属性的内容，那么将使用上下文（配置的xml文件）中相应定义的值。如果properties文件中有bean属性的内容，那么就用properties文件中的值来代替上下
通过XSD验证XML antlove xml schema xsd validation SchemaFactory
1. XmlValidation.java package xml.validation; import java.io.InputStream; import javax.xml.XMLConstants; import javax.xml.transform.stream.StreamSource; import javax.xml.validation.Schem
文本流与字符集百合不是茶 PrintWrite()的使用字符集名字别名获取
文本数据的输入输出; 输入;数据流,缓冲流输出;介绍向文本打印格式化的输出PrintWrite(); package 文本流; import java.io.FileNotFound
ibatis模糊查询sqlmap-mapping-**.xml配置 bijian1013 ibatis
正常我们写ibatis的sqlmap-mapping-*.xml文件时，传入的参数都用##标识，如下所示： <resultMap id="personInfo" class="com.bijian.study.dto.PersonDTO"> <res
java jvm常用命令工具——jdb命令(The Java Debugger) bijian1013 java jvm jdb
用来对core文件和正在运行的Java进程进行实时地调试，里面包含了丰富的命令帮助您进行调试，它的功能和Sun studio里面所带的dbx非常相似，但 jdb是专门用来针对Java应用程序的。现在应该说日常的开发中很少用到JDB了，因为现在的IDE已经帮我们封装好了，如使用ECLI
【Spring框架二】Spring常用注解之Component、Repository、Service和Controller注解 bit1129 controller
在Spring常用注解第一步部分【Spring框架一】Spring常用注解之Autowired和Resource注解（http://bit1129.iteye.com/blog/2114084）中介绍了Autowired和Resource两个注解的功能，它们用于将依赖根据名称或者类型进行自动的注入，这简化了在XML中，依赖注入部分的XML的编写，但是UserDao和UserService两个bea
cxf wsdl2java生成代码super出错,构造函数不匹配 bitray super
由于过去对于soap协议的cxf接触的不是很多,所以遇到了也是迷糊了一会.后来经过查找资料才得以解决. 初始原因一般是由于jaxws2.2规范和jdk6及以上不兼容导致的.所以要强制降为jaxws2.1进行编译生成.我们需要少量的修改: 我们原来的代码 wsdl2java com.test.xxx -client http://..... 修改后的代
动态页面正文部分中文乱码排障一例 ronin47
公司网站一部分动态页面，早先使用apache+resin的架构运行，考虑到高并发访问下的响应性能问题，在前不久逐步开始用nginx替换掉了apache。不过随后发现了一个问题，随意进入某一有分页的网页，第一页是正常的（因为静态化过了）；点“下一页”，出来的页面两边正常，中间部分的标题、关键字等也正常，唯独每个标题下的正文无法正常显示。因为有做过系统调整，所以第一反应就是新上
java-54- 调整数组顺序使奇数位于偶数前面 bylijinnan java
import java.util.Arrays; import java.util.Random; import ljn.help.Helper; public class OddBeforeEven { /** * Q 54 调整数组顺序使奇数位于偶数前面 * 输入一个整数数组，调整数组中数字的顺序，使得所有奇数位于数组的前半部分，所有偶数位于数组的后半
从100PV到1亿级PV网站架构演变 cfyme 网站架构
一个网站就像一个人，存在一个从小到大的过程。养一个网站和养一个人一样，不同时期需要不同的方法，不同的方法下有共同的原则。本文结合我自已14年网站人的经历记录一些架构演变中的体会。 1：积累是必不可少的架构师不是一天练成的。 1999年，我作了一个个人主页，在学校内的虚拟空间，参加了一次主页大赛，几个DREAMWEAVER的页面，几个TABLE作布局，一个DB连接，几行PHP的代码嵌入在HTM
[宇宙时代]宇宙时代的GIS是什么？ comsci Gis
我们都知道一个事实，在行星内部的时候，因为地理信息的坐标都是相对固定的，所以我们获取一组GIS数据之后，就可以存储到硬盘中，长久使用。。。但是，请注意，这种经验在宇宙时代是不能够被继续使用的宇宙是一个高维时空
详解create database命令 czmmiao database
完整命令 CREATE DATABASE mynewdb USER SYS IDENTIFIED BY sys_password USER SYSTEM IDENTIFIED BY system_password LOGFILE GROUP 1 ('/u01/logs/my/redo01a.log','/u02/logs/m
几句不中听却不得不认可的话 datageek
1、人丑就该多读书。 2、你不快乐是因为：你可以像猪一样懒，却无法像只猪一样懒得心安理得。 3、如果你太在意别人的看法，那么你的生活将变成一件裤衩，别人放什么屁，你都得接着。 4、你的问题主要在于：读书不多而买书太多，读书太少又特爱思考，还他妈话痨。 5、与禽兽搏斗的三种结局：(1)、赢了，比禽兽还禽兽。(2)、输了，禽兽不如。(3)、平了，跟禽兽没两样。结论：选择正确的对手很重要。 6
1 14:00 PHP中的“syntax error, unexpected T_PAAMAYIM_NEKUDOTAYIM”错误 dcj3sjt126com PHP
原文地址：http://www.kafka0102.com/2010/08/281.html 因为需要，今天晚些在本机使用PHP做些测试，PHP脚本依赖了一堆我也不清楚做什么用的库。结果一跑起来，就报出类似下面的错误：“Parse error: syntax error, unexpected T_PAAMAYIM_NEKUDOTAYIM in /home/kafka/test/
xcode6 Auto layout and size classes dcj3sjt126com ios
官方GUI https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/AutolayoutPG/Introduction/Introduction.html iOS中使用自动布局（一） http://www.cocoachina.com/ind
通过PreparedStatement批量执行sql语句【sql语句相同，值不同】梦见x光 sql 事务批量执行
比如说：我有一个List需要添加到数据库中，那么我该如何通过PreparedStatement来操作呢？ public void addCustomerByCommit(Connection conn , List<Customer> customerList) { String sql = "inseret into customer(id
程序员必知必会----linux常用命令之十【系统相关】 hanqunfeng Linux常用命令
一.linux快捷键 Ctrl+C : 终止当前命令 Ctrl+S : 暂停屏幕输出 Ctrl+Q : 恢复屏幕输出 Ctrl+U : 删除当前行光标前的所有字符 Ctrl+Z : 挂起当前正在执行的进程 Ctrl+L : 清除终端屏幕，相当于clear 二.终端命令 clear : 清除终端屏幕 reset : 重置视窗，当屏幕编码混乱时使用 time com
NGINX IXHONG nginx
pcre 编译安装 nginx conf/vhost/test.conf upstream admin { server 127.0.0.1:8080; } server { listen 80; &
设计模式--工厂模式 kerryg 设计模式
工厂方式模式分为三种： 1、普通工厂模式：建立一个工厂类，对实现了同一个接口的一些类进行实例的创建。 2、多个工厂方法的模式：就是对普通工厂方法模式的改进，在普通工厂方法模式中，如果传递的字符串出错，则不能正确创建对象，而多个工厂方法模式就是提供多个工厂方法，分别创建对象。 3、静态工厂方法模式：就是将上面的多个工厂方法模式里的方法置为静态，
Spring InitializingBean/init-method和DisposableBean/destroy-method mx_xiehd java spring bean xml
1.initializingBean/init-method 实现org.springframework.beans.factory.InitializingBean接口允许一个bean在它的所有必须属性被BeanFactory设置后，来执行初始化的工作，InitialzingBean仅仅指定了一个方法。通常InitializingBean接口的使用是能够被避免的，（不鼓励使用，因为没有必要
解决Centos下vim粘贴内容格式混乱问题 qindongliang1922 centos vim
有时候，我们在向vim打开的一个xml，或者任意文件中，拷贝粘贴的代码时，格式莫名其毛的就混乱了，然后自己一个个再重新，把格式排列好，非常耗时，而且很不爽，那么有没有办法避免呢？答案是肯定的，设置下缩进格式就可以了，非常简单：在用户的根目录下直接vi ~/.vimrc文件然后将set pastetoggle=<F9> 写入这个文件中，保存退出，重新登录，
netty大并发请求问题 tianzhihehe netty
多线程并发使用同一个channel java.nio.BufferOverflowException: null at java.nio.HeapByteBuffer.put(HeapByteBuffer.java:183) ~[na:1.7.0_60-ea] at java.nio.ByteBuffer.put(ByteBuffer.java:832) ~[na:1.7.0_60-ea]
Hadoop NameNode单点问题解决方案之一 AvatarNode wyz2009107220 NameNode
我们遇到的情况 Hadoop NameNode存在单点问题。这个问题会影响分布式平台24*7运行。先说说我们的情况吧。我们的团队负责管理一个1200节点的集群(总大小12PB)，目前是运行版本为Hadoop 0.20，transaction logs写入一个共享的NFS filer(注：NetApp NFS Filer)。经常遇到需要中断服务的问题是给hadoop打补丁。 DataNod