LVS+keepalived keepalived.conf配置

#vi/etc/keepalived/keepalived.conf

  ! Configuration File for keepalived

 

global_defs {

   router_id LVS_DEVEL

}

 

 

# VIP1

vrrp_instance VI_1 {

    state MASTER             #备份服务器上将MASTER改为BACKUP  

    interface eth0

    virtual_router_id 51

    priority 100    # 备份服务上将100改为99

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 1111

    }

    virtual_ipaddress {

        10.0.0.1  dev eth0 label eth0:1

        #(如果有多个VIP,继续换行填写.)

    }

}

 

virtual_server 10.0.0.1 80 {

    delay_loop 6                  #(每隔10秒查询realserver状态)

    lb_algo wrr                  #(lvs 算法)

    lb_kind DR                  #(Direct Route)

    persistence_timeout 60        #(同一IP的连接60秒内被分配到同一台realserver)

    protocol TCP                #(用TCP协议检查realserver状态)

 

    real_server 192.168.1.2 80 {

        weight 3               #(权重)

        TCP_CHECK {

        connect_timeout 10       #(10秒无响应超时)

        nb_get_retry 3

        delay_before_retry 3

        connect_port 80

        }

    }

    real_server 192.168.1.380 {

        weight 3

        TCP_CHECK {

        connect_timeout 10

        nb_get_retry 3

        delay_before_retry 3

        connect_port 80

        }

     }

}

你可能感兴趣的:(LVS+keepalived keepalived.conf配置)