Rake Tutorial

If you’re developing with Rails you’ve probably encountered rake once or twice. This blog post aims to walk you through where rake came from and an introduction on how to use it effectively in your Rails apps.

A Little Bit of History

Rake is the project of Jim Weirich. It’s a build tool. For a good laugh and an even more in depth history check out the "rational.rdoc" from the Rake documentation. Essentially, rake started as an idea for using Ruby inside of a Makefile. Though Jim doesn’t sound convinced from the tone in that document, it is a good idea.

What’s the need for an automated build system at all? As usual, Wikipedia has the answer:

Historically, developers used build automation to call compilers and linkers from inside a build script versus attempting to make the compiler calls from the command line. It is simple to use the command line to pass a single source module to a compiler and then to a linker to create the final deployable object. However, when attempting to compile and link many source code modules, in a particular order, using the command line process is not a reasonable solution. [sic]
As the build process grew more complex, developers began adding pre and post actions around the calls to the compilers such as a check-out from version control to the copying of deployable objects to a test location. The term “build automation” now includes managing the pre and post compile and link activities as well as the compile and link activities.

It’s about Dependencies

This may be a bit of a stretch to say but build tools are about dependencies. One file or set of files depends on another set to get compiled, linked, or other fun things before the next set can be processed. The same idea exists in rake with tasks and task dependencies. Let’s look at a simple rake task. Save the following as “Rakefile” in any directory:

directory "tmp"   file "hello.tmp" => "tmp" do sh "echo 'Hello' >> 'tmp/hello.tmp'" end

What we’re saying here is that the file named “hello.tmp” depends on the directory "tmp". When rake runs across this, it’s going to create the directory "tmp" first before running the "hello.tmp" task. When you run it, you’ll see something like the following:

[jason@brick:~/src]$ rake hello.tmp (in /Users/jason/src) echo 'Hello' > 'tmp/hello.tmp'

If you were to look at the "hello.tmp" file you would see the phrase "Hello". What happens if you run it again? You’ll see the same output again. What’s going on? Rake is generating the file again. It’s doing this because it can’t actually find the file tmp/hello.tmp from that definition. Let’s redefine the task:

directory "tmp"   file "tmp/hello.tmp" => "tmp" do sh "echo 'Hello' > 'tmp/hello.tmp'" end

Now if you were to run it twice you would see something like this:

[jason@brick:~/src]$ rake "tmp/hello.tmp" (in /Users/jason/src) mkdir -p tmp echo 'Hello' > 'tmp/hello.tmp' [jason@brick:~/src]$ rake "tmp/hello.tmp" (in /Users/jason/src)

Rake now knows that the file task has been run.

Running Other Tasks

Rake tasks can take the form of having prerequisites and can depend on another task. Let’s say I wanted to get ready in the morning. My process would be something like this:

1. Turn off alarm clock.
2. Groom myself.
3. Make coffee.
4. Walk dog.

Let’s further assume that I have OCD and have to do all of these in order. In rake I might express my morning as follows:

task :turn_off_alarm do puts "Turned off alarm. Would have liked 5 more minutes, though." end   task :groom_myself do puts "Brushed teeth." puts "Showered." puts "Shaved." end   task :make_coffee do cups = ENV["COFFEE_CUPS"] || 2 puts "Made #{cups} cups of coffee. Shakes are gone." end   task :walk_dog do puts "Dog walked." end   task :ready_for_the_day => [:turn_off_alarm, :groom_myself, :make_coffee, :walk_dog] do puts "Ready for the day!" end

If I were to run this as is I would type rake ready_for_the_day and I’d see the following:

[jason@brick:~/src]$ rake ready_for_the_day (in /Users/jason/src) Turned off alarm. Would have liked 5 more minutes, though. Brushed teeth. Showered. Shaved. Made 5 cups of coffee. Shakes are gone. Dog walked. Ready for the day!

By running the ready_for_the_day task it notices that the turn_off_alarm, groom_myself, make_coffee, and walk_dog tasks are all prerequisites of theready_for_the_day task. Then it runs them all in the appropriate order. You’ll notice that we can pass something in to the make_coffee task. If we were having a really tough day we could pass in a value to the COFFEE_CUPS environment variable and be more prepared:

[jason@brick:~/src]$ rake COFFEE_CUPS=5 make_coffee (in /Users/jason/src) Made 5 cups of coffee. Shakes are gone.

Namespaces

Rake supports the concept of namespaces which essentially lets you group together similar tasks inside of one namespace. You’d then specify the namespace when you call a task inside it. It keeps things tidy while still being quite effective. In Rails, you might notice the db:migrate task. In that example, db is the namespace and migrate is the task. Using the above example, we might put everything in to the morning namespace:

namespace :morning do task :turn_of_alarm .... end

Now if you were to run rake COFFEE_CUPS=3 morning:ready_for_the_day you would have the same output as above, only it only took 3 cups of coffee today. Score!

The Default Task

Rake has the concept of a default task. This is essentially the task that will be run if you type rake without any arguments. If we wanted our default task to be turning off the alarm from the example above, we’d do this:

task :default => 'morning:turn_off_alarm'

Running rake now produces the following:

[jason@brick:~/src]$ rake (in /Users/jason/src) Turned off alarm. Would have liked 5 more minutes, though.

Describing Your Tasks

You can use the desc method to describe your tasks. This is done on the line right above the task definition. It’s also what gives you that nice output when you runrake -T to get a list of tasks. Tasks are displayed in alphabetical order. We’ll define some descriptions in our Rakefile (abbreviated for brevity):

... desc "Make coffee" task :make_coffee do cups = ENV["COFFEE_CUPS"] || 2 puts "Made #{cups} cups of coffee. Shakes are gone." end ...

Now when we run rake -T for our list of tasks we get the following output:

[jason@brick:~/src]$ rake -T (in /Users/jason/src) rake afternoon:make_coffee # Make afternoon coffee rake morning:groom_myself # Take care of normal hygeine tasks. rake morning:make_coffee # Make coffee rake morning:ready_for_the_day # Get ready for the day rake morning:turn_off_alarm # Turn off alarm. rake morning:walk_dog # Walk the dog

You can add in a string to get tasks matching that displayed. Running rake -T af would show just the afternoon task.

Redefining Tasks

Let’s say you want to add on to an existing task. Perhaps you have another item in your grooming routine like styling your hair. You could write another task and slip it in as a dependency for groom_myself but you could also redefine groom_myself later on (shortened for brevity but you get the idea):

namespace :morning do .... task :groom_myself do puts "Brushed teeth." puts "Showered." puts "Shaved." end .... end ... namespace :morning do task :groom_myself do puts "Styled hair." end end

[jason@brick:~/src]$ rake morning:groom_myself (in /Users/jason/src) Brushed teeth. Showered. Shaved. Styled hair.

Invoking Tasks

You may at some point want to invoke a task from inside another task. Let’s say, for example, you wanted to make coffee in the afternoon, too. If you need an extra upper after lunch you could do that the following way:

namespace :afternoon do task :make_coffee do Rake::Task['morning:make_coffee'].invoke puts "Ready for the rest of the day!" end end

Which outputs:

[jason@brick:~/src]$ rake afternoon:make_coffee COFFEE_CUPS=1 (in /Users/jason/src) Made 1 cups of coffee. Shakes are gone. Ready for the rest of the day!

A real world example of this is the rcov:all task. I use this in Genius Pool for aggregate rcov data. It’s shamelessly stolen from Clayton Lengel-Zigich. Go check out that post for a good example of invoking other tasks from rake.

Refactoring

You’ll notice in the example above we’re delegating most of the work to already defined methods and tasks in the RSpec and Cucumber classes. As a general rule, try to keep your methods already defined other places and call them from rake with your specific options and use cases. Let’s say I had a Rails application that e-mailed all accounts in the system that their account was expiring in a certain number of days. Here’s one way to write it:

namespace :accounts do desc "Email expiring accounts to let them know" task :email_expiring => :environment do date = ENV['from'] ? Date.parse(ENV['from']) : Date.today accounts = Account.find(:all, :conditions => ["expiration_date = ?", date] accounts.each do |account| Notifier.deliver_account_expiration(account) end end end

A better way, that would let you test it more thoroughly would be to do the following:

namespace :accounts do desc "Email expiring accounts to let them know" task :email_expiring => :environment do date = ENV['from'] ? Date.parse(ENV['from']) : Date.today Account.notify_expiring(date) end end

This lets you unit test your notify_expiring method on the account class and make sure that it’s doing what it’s supposed to do. This is a small, made up example, but you get the idea. Here’s an example from Resque:

desc 'Restart redis' task :restart do RedisRunner.stop RedisRunner.start end

Notice the delegation to the RedisRunner class methods? This is a great rake task

Rails

You can get access to your models, and in fact, your whole environment by making tasks dependent on the environment task. This lets you do things like run rake RAILS_ENV=staging db:migrate. Rails will autmatically pick up tasks in lib/tasks. Any files named with the .rake extension will get picked up when you do rake -T.

Scheduling Rake Tasks

You can use cron to schedule rake tasks. Let’s say you wanted to run the account email expiration task every night at 12:15 on your production server, you might have something like this:

15 * * * * cd /data/my_app/current && /usr/bin/rake RAILS_ENV=production accounts:email_expiring

Misc

Rake.original_dir gives you the directory that the original rake task was run from.

Derivatives

• Thor is a more class based approach to solving some of the things rake does as far as actual tasks go.
• Capistrano is the de facto standard for deploying rails apps. Its syntax is inspired pretty heavily by Rake, but it is definitely not rake.

Further Reading

• "Testing Rake Tasks" by Jay Fields
• "On Rake" by John Barnette
• How To: Setup RSpec, Cucumber, Webrat, RCov and Autotest on Leopard | Clayton Lengel-Zigich

• Custom Rake Tasks Railscast

转自：http://jasonseifer.com/2010/04/06/rake-tutorial