centos6下编译安装nginx1.9.14

Linux操作系统：CentOS6.5 64bit

最新版Nginx: 1.9.3

Nginx 1.9.3 发布下载，高性能 Web 服务器 

1、下载Nginx

 wget http://nginx.org/download/nginx-1.9.3.tar.gz

2、安装依赖的库

yum -y install gcc automake autoconf libtool make  libxml2-devel libxslt-devel perl-devel perl-ExtUtils-Embed

3、安装pcre，用于重写rewrite

[root@bkjia softs]# wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz

　　将pcre安装到 /usr/local/src

[root@bkjia softs]# cd /usr/local/src/

[root@bkjia src]# tar pcre-8.37.tar.gz 
[root@bkjia src]# cd pcre-8.37

[root@bkjia pcre-8.37]# ./configure 
[root@bkjia pcre-8.37]# make
[root@bkjia pcre-8.37]# make install

4、安装zlib，用于gzip压缩

　　安装到/usr/local/src

[root@bkjia src]# wget http://zlib.net/zlib-1.2.8.tar.gz

[root@bkjia src]# tar -zxv zlib-1.2.8.tar.gz

[root@bkjia src]# cd zlib-1.2.8

[root@bkjia zlib-1.2.8]# ./configure 
[root@bkjia zlib-1.2.8]# make
[root@bkjia zlib-1.2.8]# make install

5、安装openssl，用于ssl

　　安装到/usr/local/src

[root@bkjia src]# wget http://www.openssl.org/source/openssl-1.0.2g.tar.gz

[root@bkjia src]# tar -zxvf openssl-1.0.2g.tar.gz

[root@bkjia src]# cd openssl-1.0.2g

[root@bkjia zlib-1.2.8]# ./configure 
[root@bkjia zlib-1.2.8]# make
[root@bkjia zlib-1.2.8]# make install

6、安装Nginx

　　安装到/usr/local/nginx

[root@bkjia softs]# cd /usr/local
[root@bkjia local]# pwd
/usr/local
[root@bkjia local]#

[root@bkjia local]# cd nginx-1.9.3

[root@bkjia nginx-1.9.3]# ./configure \
--prefix=/usr/local/nginx
--with-http_ssl_module \
--with-pcre=/usr/local/src/pcre-8.37 \
--with-zlib=/usr/local/src/zlib-1.2.8 \
--with-openssl=/usr/local/src/openssl-1.0.1d

[root@bkjia nginx-1.9.3]# make
[root@bkjia nginx-1.9.3]# make install

7、设置开机自启动

　　在/etc/init.d/下建立nginx文件

[root@bkjia init.d]# vi nginx

　  写入以下内容：

#!/bin/bash
# nginx Startup script for the Nginx HTTP Server
# chkconfig: - 85 15
# description: Nginx is a high-performance web and proxy server.
#              It has a lot of features, but it's not for everyone.
# processname: nginx
# pidfile: /usr/local/nginx/logs/nginx.pid
# config: /usr/local/nginx/conf/nginx.conf
nginxd=/usr/local/nginx/sbin/nginx
nginx_config=/usr/local/nginx/conf/nginx.conf
nginx_pid=/usr/local/nginx/logs/nginx.pid
RETVAL=0
prog="nginx"
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x $nginxd ] || exit 0
# Start nginx daemons functions.
start() {
if [ -e $nginx_pid ];then
  echo "nginx already running...."
  exit 1
fi
  echo -n $"Starting $prog: "
  daemon $nginxd -c ${nginx_config}
  RETVAL=$?
  echo
  [ $RETVAL = 0 ] && touch /var/lock/subsys/nginx
  return $RETVAL
}
# Stop nginx daemons functions.
stop() {
        echo -n $"Stopping $prog: "
        killproc $nginxd
        RETVAL=$?
        echo
        [ $RETVAL = 0 ] && rm -f /var/lock/subsys/nginx /var/run/nginx.pid
}
# reload nginx service functions.
reload() {
    echo -n $"Reloading $prog: "
    #kill -HUP `cat ${nginx_pid}`
    killproc $nginxd -HUP
    RETVAL=$?
    echo
}
# See how we were called.
case "$1" in
start)
        start
        ;;
stop)
        stop
        ;;
reload)
        reload
        ;;
restart)
        stop
        start
        ;;
status)
        status $prog
        RETVAL=$?
        ;;
*)
        echo $"Usage: $prog {start|stop|restart|reload|status|help}"
        exit 1
esac
exit $RETVAL

　　赋予可执行权限

[root@bkjia init.d]# chmod a+x /etc/init.d/nginx

　　设置开机启动

[root@bkjia init.d]# chkconfig --add /etc/init.d/nginx
[root@bkjia init.d]# chkconfig nginx on

 　　启动：

[root@bkjia lib64]# service nginx start
Starting nginx:                                            [  OK  ]
[root@bkjia lib64]#

8、启动报错处理

[root@bkjia init.d]# service nginx start
Starting nginx: /usr/local/nginx/sbin/nginx: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory
                                                          [FAILED]

　　使用ldd看nginx包含的动态函式库

[root@bkjia src]# ldd $(which /usr/local/nginx/sbin/nginx)
        linux-vdso.so.1 =>  (0x00007fff89fff000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x0000003978400000)
        libcrypt.so.1 => /lib64/libcrypt.so.1 (0x000000397b800000)
        libpcre.so.1 => not found
        libcrypto.so.10 => /usr/lib64/libcrypto.so.10 (0x00007ffd9a115000)
        libz.so.1 => /lib64/libz.so.1 (0x0000003977c00000)
        libc.so.6 => /lib64/libc.so.6 (0x0000003978000000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003977800000)
        libfreebl3.so => /lib64/libfreebl3.so (0x000000397ac00000)
        libdl.so.2 => /lib64/libdl.so.2 (0x0000003978800000)
[root@bkjia src]# cd /

　　可以看到  libpcre.so.1 => not found

　　解决方法：

　　进入/lib64目录中手动链接下

[root@bkjia init.d]# cd /lib64/

[root@bkjia lib64]# ln -s libpcre.so.0.0.1 libpcre.so.1

　然后再启动。

更多Nginx相关教程见以下内容：

CentOS 6.2实战部署Nginx+MySQL+PHP

使用Nginx搭建WEB服务器

搭建基于Linux6.3+Nginx1.2+PHP5+MySQL5.5的Web服务器全过程

CentOS 6.3下Nginx性能调优

CentOS 6.3下配置Nginx加载ngx_pagespeed模块

CentOS 6.4安装配置Nginx+Pcre+php-fpm

Nginx安装配置使用详细笔记

Nginx日志过滤 使用ngx_log_if不记录特定日志