Axis2通过JSON交互，默认情况下，数据的交互是通过XML完成的，一方面，XML体积相对JSON大，同时，在javascript端使用XML没有JSON方便。所以这里我们要使用JSON进行数据交互。
版本信息：
JDK 1.6
Axis2 1.2 (为什么不用最新版本，因为公司产品线是这个版本)
Tomcat6.0.20
此项目基于项目：http://jerval.iteye.com/blog/2227561 ， 所以请先了解此文章并把相应的环境构建好。
1，下载wso2dynamic-response-1.5.mar，主要是为项目提供DynamicResponseHandler。下载地址：http://dist.wso2.org/maven2/org/wso2/dynamicresponse/wso2dynamic-response/1.5/wso2dynamic-response-1.5.mar 。
2，下载wso2dynamic-response-1.5.mar完成后，将其放入此web项目WEB-INF\modules里。
3，下载jettison-1.2.jar和jettison-1.2-patched.jar。
jettison-1.2.jar：http://www.java2s.com/Code/JarDownload/jettison/jettison-1.2.jar.zip
jettison-1.2-patched.jar：http://www.marcusschiesser.de/wp-content/uploads/2009/01/jettison-1.2-patch.zip.zip
4，将下载后jettison-1.2.jar和jettison-1.2-patched.jar包放入{TOMCAT_HOME}/lib下。如果存在jettison-1.0-RC1.jar，则一定要将其删除，否则会出现问题。
5，添加
axis2.xml到web项目WEB-INF/conf中
<!--
/*
* Copyright 2001-2004 The Apache Software Foundation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
-->
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment">true</parameter>
<parameter name="hotupdate">false</parameter>
<parameter name="enableMTOM">false</parameter>
<parameter name="enableSwA">false</parameter>
<!--Uncomment if you want to enable file caching for attachments -->
<!--parameter name="cacheAttachments">true</parameter>
<parameter name="attachmentDIR"></parameter>
<parameter name="sizeThreshold">4000</parameter-->
<!--This will give out the timout of the configuration contexts, in milliseconds-->
<parameter name="ConfigContextTimeoutInterval">30000</parameter>
<!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
<!--that behavior.-->
<parameter name="sendStacktraceDetailsWithFaults">false</parameter>
<!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
<parameter name="userName">admin</parameter>
<parameter name="password">axis2</parameter>
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
<!--<parameter name="ServicesDirectory">service</parameter>-->
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
<!--<parameter name="ModulesDirectory">modules</parameter>-->
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
<!--root which can configured using the following contextRoot parameter-->
<!--<parameter name="contextRoot">axis2</parameter>-->
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
<!--context path to proper Axis2 servlets-->
<!--<parameter name="servicePath">services</parameter>-->
<!--<parameter name="restPath">rest</parameter>-->
<!--==============================================================-->
<!-- Custom Deplyers -->
<!--==============================================================-->
<!--To have POJO (Service as only one class file , class can be annotated one or not)
support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
<!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->
<!-- Following parameter will completely disable REST handling in Axis2-->
<parameter name="disableREST" locked="true">false</parameter>
<!-- If you have a front end host which exposes this webservice using a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
<!--any operation -->
<!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Message Formatter -->
<!-- ================================================= -->
<!--Following content type to message formatter mapping can be used to implement support for different message -->
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageFormatters>
<messageFormatter contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
<messageFormatter contentType="multipart/form-data"
class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
<messageFormatter contentType="application/xml"
class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
</messageFormatters>
<!-- ================================================= -->
<!-- Message Builders -->
<!-- ================================================= -->
<!--Following content type to builder mapping can be used to implement support for different message -->
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageBuilders>
<messageBuilder contentType="application/xml"
class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
<messageBuilder contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
<messageBuilder contentType="multipart/form-data"
class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
</messageBuilders>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port">8080</parameter>
<!-- Here is the complete list of supported parameters (see example settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint references (default null)
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait for data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize latency (default true)
false to minimize bandwidth consumption by combining segments
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
note that default queue never fills up: see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
note that no such threads can exist with default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
-->
<!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
<!-- <parameter name="originServer">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
<!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
<parameter name="myTopicConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
</parameter>
<parameter name="myQueueConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
<parameter name="default">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
</transportReceiver>-->
<!-- ================================================= -->
<!-- Mail Transport Listener -->
<!-- This is a sample configuration. It assumes a mail server running in localhost.
Listener pops messages that comes to the email address red@localhost. Users
password is red. Listener connect to the server every 3000 milliseconds.
Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
<parameter name="mail.pop3.host">localhost</parameter>
<parameter name="mail.pop3.user">red</parameter>
<parameter name="mail.store.protocol">pop3</parameter>
<parameter name="transport.mail.pop3.password">red</parameter>
<parameter name="transport.mail.replyToAddress">red@localhost</parameter>
<parameter name="transport.listener.interval">3000</parameter>
</transportReceiver>-->
<!--Uncomment if you want to have TCP transport support-->
<!--transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port">6060</parameter-->>
<!--If you want to give your own host address for EPR generation-->
<!--uncomment the following paramter , and set it as you required.-->
<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
<!-- /transportReceiver -->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
<!-- <parameter name="OmitSOAP12Action">true</parameter> -->
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
</transportSender>
<transportSender name="jms"
class="org.apache.axis2.transport.jms.JMSSender"/>
<!-- ================================================= -->
<!-- Mail Transport Sender -->
<!--Only need to uncomment the sender. Configuration is achieved with every client.
At any instant mail host should be given. Sample configuration has been given.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="mail.smtp.host">localhost</parameter>
</transportSender>-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="addressing"/>
<!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Clustering -->
<!-- ================================================= -->
<!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
<!--
<cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
<parameter name="param1">value1</parameter>
<configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
<listeners>
</listeners>
</configurationManager>
<contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
<listeners>
</listeners>
</contextManager>
</cluster>
-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="InFlow">
<!-- System predefined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Transport"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Transport"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="Dispatch"/>
</handler>
</phase>
<!-- System predefined phases -->
<!-- After Postdispatch phase module author or service author can add any phase he want -->
<phase name="OperationInPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
<phaseOrder type="InFaultFlow">
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFaultFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
6，在axis2.xml中添加<module ref="wso2dynamic-response"/>，也可以写成<module ref="wso2dynamic-response-1.5"/>，这里的名字是wso2dynamic-response-1.5.mar的文件名或者文件名去掉版本后缀'-1.5'。添加后的代码：
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="wso2dynamic-response"/>
<!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara">N/A</parameter>-->
<!--</moduleConfig>-->
7，添加messageFormatter：
<messageFormatter contentType="application/json" class="org.apache.axis2.json.JSONMessageFormatter"/> <messageFormatter contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishMessageFormatter"/>
添加后的代码：
<!-- ================================================= -->
<!-- Message Formatter -->
<!-- ================================================= -->
<!--Following content type to message formatter mapping can be used to implement support for different message -->
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageFormatters>
<messageFormatter contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
<messageFormatter contentType="multipart/form-data"
class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
<messageFormatter contentType="application/xml"
class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
<messageFormatter contentType="application/json" class="org.apache.axis2.json.JSONMessageFormatter"/>
<messageFormatter contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishMessageFormatter"/>
</messageFormatters>
8，添加messageBuilder
<messageBuilder contentType="application/json" class="org.apache.axis2.json.JSONOMBuilder"/>
<messageBuilder contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishOMBuilder"/>
添加后的代码：
<!-- ================================================= -->
<!-- Message Builders -->
<!-- ================================================= -->
<!--Following content type to builder mapping can be used to implement support for different message -->
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageBuilders>
<messageBuilder contentType="application/xml"
class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
<messageBuilder contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
<messageBuilder contentType="multipart/form-data"
class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
<messageBuilder contentType="application/json" class="org.apache.axis2.json.JSONOMBuilder"/>
<messageBuilder contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishOMBuilder"/>
</messageBuilders>
8，添加完成后的整个axis2.xml：
<!--
/*
* Copyright 2001-2004 The Apache Software Foundation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
-->
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment">true</parameter>
<parameter name="hotupdate">false</parameter>
<parameter name="enableMTOM">false</parameter>
<parameter name="enableSwA">false</parameter>
<!--Uncomment if you want to enable file caching for attachments -->
<!--parameter name="cacheAttachments">true</parameter>
<parameter name="attachmentDIR"></parameter>
<parameter name="sizeThreshold">4000</parameter-->
<!--This will give out the timout of the configuration contexts, in milliseconds-->
<parameter name="ConfigContextTimeoutInterval">30000</parameter>
<!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
<!--that behavior.-->
<parameter name="sendStacktraceDetailsWithFaults">false</parameter>
<!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
<parameter name="userName">admin</parameter>
<parameter name="password">axis2</parameter>
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
<!--<parameter name="ServicesDirectory">service</parameter>-->
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
<!--<parameter name="ModulesDirectory">modules</parameter>-->
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
<!--root which can configured using the following contextRoot parameter-->
<!--<parameter name="contextRoot">axis2</parameter>-->
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
<!--context path to proper Axis2 servlets-->
<!--<parameter name="servicePath">services</parameter>-->
<!--<parameter name="restPath">rest</parameter>-->
<!--==============================================================-->
<!-- Custom Deplyers -->
<!--==============================================================-->
<!--To have POJO (Service as only one class file , class can be annotated one or not)
support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
<!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->
<!-- Following parameter will completely disable REST handling in Axis2-->
<parameter name="disableREST" locked="true">false</parameter>
<!-- If you have a front end host which exposes this webservice using a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
<!--any operation -->
<!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Message Formatter -->
<!-- ================================================= -->
<!--Following content type to message formatter mapping can be used to implement support for different message -->
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageFormatters>
<messageFormatter contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
<messageFormatter contentType="multipart/form-data"
class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
<messageFormatter contentType="application/xml"
class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
<messageFormatter contentType="application/json" class="org.apache.axis2.json.JSONMessageFormatter"/>
<messageFormatter contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishMessageFormatter"/>
</messageFormatters>
<!-- ================================================= -->
<!-- Message Builders -->
<!-- ================================================= -->
<!--Following content type to builder mapping can be used to implement support for different message -->
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageBuilders>
<messageBuilder contentType="application/xml"
class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
<messageBuilder contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
<messageBuilder contentType="multipart/form-data"
class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
<messageBuilder contentType="application/json" class="org.apache.axis2.json.JSONOMBuilder"/>
<messageBuilder contentType="application/json/badgerfish" class="org.apache.axis2.json.JSONBadgerfishOMBuilder"/>
</messageBuilders>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port">8080</parameter>
<!-- Here is the complete list of supported parameters (see example settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint references (default null)
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait for data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize latency (default true)
false to minimize bandwidth consumption by combining segments
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
note that default queue never fills up: see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
note that no such threads can exist with default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
-->
<!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
<!-- <parameter name="originServer">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
<!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
<parameter name="myTopicConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
</parameter>
<parameter name="myQueueConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
<parameter name="default">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
</transportReceiver>-->
<!-- ================================================= -->
<!-- Mail Transport Listener -->
<!-- This is a sample configuration. It assumes a mail server running in localhost.
Listener pops messages that comes to the email address red@localhost. Users
password is red. Listener connect to the server every 3000 milliseconds.
Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
<parameter name="mail.pop3.host">localhost</parameter>
<parameter name="mail.pop3.user">red</parameter>
<parameter name="mail.store.protocol">pop3</parameter>
<parameter name="transport.mail.pop3.password">red</parameter>
<parameter name="transport.mail.replyToAddress">red@localhost</parameter>
<parameter name="transport.listener.interval">3000</parameter>
</transportReceiver>-->
<!--Uncomment if you want to have TCP transport support-->
<!--transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port">6060</parameter-->>
<!--If you want to give your own host address for EPR generation-->
<!--uncomment the following paramter , and set it as you required.-->
<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
<!-- /transportReceiver -->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
<!-- <parameter name="OmitSOAP12Action">true</parameter> -->
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
</transportSender>
<transportSender name="jms"
class="org.apache.axis2.transport.jms.JMSSender"/>
<!-- ================================================= -->
<!-- Mail Transport Sender -->
<!--Only need to uncomment the sender. Configuration is achieved with every client.
At any instant mail host should be given. Sample configuration has been given.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="mail.smtp.host">localhost</parameter>
</transportSender>-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="wso2dynamic-response"/>
<!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Clustering -->
<!-- ================================================= -->
<!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
<!--
<cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
<parameter name="param1">value1</parameter>
<configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
<listeners>
</listeners>
</configurationManager>
<contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
<listeners>
</listeners>
</contextManager>
</cluster>
-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="InFlow">
<!-- System predefined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Transport"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Transport"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="Dispatch"/>
</handler>
</phase>
<!-- System predefined phases -->
<!-- After Postdispatch phase module author or service author can add any phase he want -->
<phase name="OperationInPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
<phaseOrder type="InFaultFlow">
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFaultFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
9，部署web项目到Tomcat，并启动Tomcat，启动完成后在浏览器中输入：http://localhost:8080/webservice/services/WeatherService/getWeather?response=application/json
如果成功，则会返回如下内容：
{"return":{"@nil":"true"}}
最少lib包：
annogen-0.1.0.jar axiom-api-1.2.4.jar axiom-impl-1.2.4.jar axis2-adb-1.2.jar axis2-java2wsdl-1.2.jar axis2-json-1.2.jar axis2-kernel-1.2.jar backport-util-concurrent.jar commons-codec-1.3.jar commons-fileupload-1.1.1.jar commons-httpclient-3.0.1.jar commons-logging.jar jettison-1.2.jar jettison-1.2-patched.jar neethi-2.0.1.jar wsdl4j-1.5.1.jar XmlSchema-1.3.1.jar