Multi-Master Replication Manager for MySQL
个人技术博客：
http://www.cooli.cc/
Installation Guide
Note: this guide is a draft, feel free to make changes if you see anything that can be improved, expanded on or corrected This installation guide describes a installation of MMM 2 (without the MMM tools) based on Debian Lenny (5.0)
A basic installation contains at least 2 database servers and 1 monitoring server. In this guide, I used 5 servers with Debian Lenny (5.0)
I used the following virtual IPs. They will be distributed across the hosts by MMM.
Basic configuration of master 1
First we install MySQL on all hosts:
Then we edit the configuration file /etc/mysql/my.cnf and add the following lines - be sure to use different server ids for all hosts:
Then remove the following entry:
Do not bind of any specific IP, use 0.0.0.0 instead:
Afterwards we need to restart MySQL for our changes to take effect:
Create users
Now we can create the required users. We'll need 3 different users:
Note: We could be more restrictive here regarding the hosts from which the users are allowed to connect: mmm_monitor is used from 192.168.0.10. mmm_agent and replication are used from 192.168.0.11 - 192.168.0.14.
Synchronisation of data between both databases
I'll assume that db1 contains the correct data. If you have an empty database, you still have to syncronize the accounts we have just created.
First make sure that no one is altering the data while we create a backup.
Then get the current position in the binary-log. We will need this values when we setup the replication on db2, db3 and db4.
Now we can remove the database-lock. Go to the first shell:
Then import this into db2, db3 and db4:
Then flush the privileges on db2, db3 and db4. We have altered the user-table and mysql has to reread this table.
On debian and ubuntu, copy the passwords in /etc/mysql/debian.cnf from db1 to db2, db3 and db4. This password is used for starting and stopping mysql.
Both databases now contain the same data. We now can setup replication to keep it that way.
Note: Import just only add records from dump file. You should drop all databases before import dump file.
Setup replication
Configure replication on db2, db3 and db4 with the following commands:
Start the slave-process on all 3 hosts:
Now check if the replication is running correctly on all hosts:
Now we have to make db1 replicate from db2. First we have to determine the values for master_log_file and master_log_pos:
Now insert the values return by “show master status” on db2 at the <file> and <position> tags.
Start the slave-process:
Install MMM
Create user
Optional: Create user that will be the owner of the MMM scripts and configuration files. This will provide an easier method to securely manage the monitor scripts.
First install dependencies:
Then fetch the latest mysql-mmm-common*.deb and mysql-mmm-monitor*.deb and install it:
Database hosts
On Ubuntu First install dependencies:
Then fetch the latest mysql-mmm-common*.deb and mysql-mmm-agent*.deb and install it:
On RedHat
This will take care of all the dependencies, which may include:
Installed:
Configure MMM
All generic configuration-options are grouped in a separate file called /etc/mysql-mmm/mmm_common.conf. This file will be the same on all hosts in the system:
Don't forget to copy this file to all other hosts (including the monitoring host).
On the database hosts we need to edit /etc/mysql-mmm/mmm_agent.conf. Change “db1” accordingly on the other hosts:
On the monitor host we need to edit /etc/mysql-mmm/mmm_mon.conf:
ping_ips are some ips that are pinged to determine whether the network connection of the monitor is ok. I used my switch (192.168.0.1) and the four database server.
Start MMM
Start the agents
(On the database hosts)
Debian/Ubuntu
Edit /etc/default/mysql-mmm-agent to enable the agent:
ENABLED=1Red Hat
RHEL/Fedora does not enable packages to start at boot time per default policy, so you might have to turn it on manually so the agents will start automatically when server is rebooted:
Then start it:
Start the monitor
(On the monitoring host) Edit /etc/default/mysql-mmm-monitor to enable the monitor:
Then start it:
Wait some seconds for mmmd_mon to start up. After a few seconds you can use mmm_control to check the status of the cluster:
Because its the first startup the monitor does not know our hosts, so it sets all hosts to state AWAITING_RECOVERY and logs a warning message:
2009/10/28 23:15:28 WARN Detected new host 'db4': Setting its initial state to 'AWAITING_RECOVERY'. Use 'mmm_control set_online db4' to switch it online.Now we set or hosts online (db1 first, because the slaves replicate from this host):
原文地址： http://mysql-mmm.org/mmm2:guide
Installation Guide
Note: this guide is a draft, feel free to make changes if you see anything that can be improved, expanded on or corrected This installation guide describes a installation of MMM 2 (without the MMM tools) based on Debian Lenny (5.0)
A basic installation contains at least 2 database servers and 1 monitoring server. In this guide, I used 5 servers with Debian Lenny (5.0)
| function ip hostname server id |
| monitoring host 192.168.0.10 mon - |
| master 1 192.168.0.11 db1 1 |
| master 2 192.168.0.12 db2 2 |
| slave 1 192.168.0.13 db3 3 |
| slave 2 192.168.0.14 db4 4 |
I used the following virtual IPs. They will be distributed across the hosts by MMM.
| ip role description |
| 192.168.0.100 writer Your application should connect to this IP for write queries. |
| 192.168.0.101 reader Your application should connect to one of these four IPs for read queries |
| 192.168.0.102 reader |
| 192.168.0.103 reader |
| 192.168.0.104 reader |
Basic configuration of master 1
First we install MySQL on all hosts:
aptitude install mysql-server
Then we edit the configuration file /etc/mysql/my.cnf and add the following lines - be sure to use different server ids for all hosts:
server_id = 1 log_bin = /var/log/mysql/mysql-bin.log log_bin_index = /var/log/mysql/mysql-bin.log.index relay_log = /var/log/mysql/mysql-relay-bin relay_log_index = /var/log/mysql/mysql-relay-bin.index expire_logs_days = 10 max_binlog_size = 100M log_slave_updates = 1
Then remove the following entry:
bind-address = 127.0.0.1
Do not bind of any specific IP, use 0.0.0.0 instead:
bind-address = 0.0.0.0
Afterwards we need to restart MySQL for our changes to take effect:
/etc/init.d/mysql restart
Create users
Now we can create the required users. We'll need 3 different users:
| function description privileges |
| monitor user used by the mmm monitor to check the health of the MySQL servers REPLICATION CLIENT |
| agent user used by the mmm agent to change read-only mode, replication master, etc. SUPER, REPLICATION CLIENT, PROCESS |
| relication user used for replication REPLICATION SLAVE |
GRANT REPLICATION CLIENT ON *.* TO 'mmm_monitor'@'192.168.0.%' IDENTIFIED BY 'monitor_password'; GRANT SUPER, REPLICATION CLIENT, PROCESS ON *.* TO 'mmm_agent'@'192.168.0.%' IDENTIFIED BY 'agent_password'; GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.0.%' IDENTIFIED BY 'replication_password';
Note: We could be more restrictive here regarding the hosts from which the users are allowed to connect: mmm_monitor is used from 192.168.0.10. mmm_agent and replication are used from 192.168.0.11 - 192.168.0.14.
Synchronisation of data between both databases
I'll assume that db1 contains the correct data. If you have an empty database, you still have to syncronize the accounts we have just created.
First make sure that no one is altering the data while we create a backup.
(db1) mysql> FLUSH TABLES WITH READ LOCK;
Then get the current position in the binary-log. We will need this values when we setup the replication on db2, db3 and db4.
(db1) mysql> SHOW MASTER STATUS; +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000002 | 374 | | | +------------------+----------+--------------+------------------+ 1 row in set (0.00 sec) DON'T CLOSE this mysql-shell. If you close it, the database lock will be removed. Open a second console and type:
db1$ mysqldump -u root -p --all-databases > /tmp/database-backup.sql
Now we can remove the database-lock. Go to the first shell:
(db1) mysql> UNLOCK TABLES;Copy the database backup to db2, db3 and db4. db1$ scp /tmp/database-backup.sql <user>@192.168.0.12:/tmp db1$ scp /tmp/database-backup.sql <user>@192.168.0.13:/tmp db1$ scp /tmp/database-backup.sql <user>@192.168.0.14:/tmp
Then import this into db2, db3 and db4:
db2$ mysql -u root -p < /tmp/database-backup.sql db3$ mysql -u root -p < /tmp/database-backup.sql db4$ mysql -u root -p < /tmp/database-backup.sql
Then flush the privileges on db2, db3 and db4. We have altered the user-table and mysql has to reread this table.
(db2) mysql> FLUSH PRIVILEGES; (db3) mysql> FLUSH PRIVILEGES; (db4) mysql> FLUSH PRIVILEGES;
On debian and ubuntu, copy the passwords in /etc/mysql/debian.cnf from db1 to db2, db3 and db4. This password is used for starting and stopping mysql.
Both databases now contain the same data. We now can setup replication to keep it that way.
Note: Import just only add records from dump file. You should drop all databases before import dump file.
Setup replication
Configure replication on db2, db3 and db4 with the following commands:
(db2) mysql> CHANGE MASTER TO master_host='192.168.0.11', master_port=3306, master_user='replication',
master_password='replication_password', master_log_file='<file>', master_log_pos=<position>;
(db3) mysql> CHANGE MASTER TO master_host='192.168.0.11', master_port=3306, master_user='replication',
master_password='replication_password', master_log_file='<file>', master_log_pos=<position>;
(db4) mysql> CHANGE MASTER TO master_host='192.168.0.11', master_port=3306, master_user='replication',
master_password='replication_password', master_log_file='<file>', master_log_pos=<position>;Please insert the values return by “show master status” on db1 at the <file> and <position> tags.
Start the slave-process on all 3 hosts:
(db2) mysql> START SLAVE; (db3) mysql> START SLAVE; (db4) mysql> START SLAVE;
Now check if the replication is running correctly on all hosts:
(db2) mysql> SHOW SLAVE STATUS\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.0.11
Master_User: replication
Master_Port: 3306
Connect_Retry: 60
…
(db3) mysql> SHOW SLAVE STATUS\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.0.11
Master_User: replication
Master_Port: 3306
Connect_Retry: 60
…
(db4) mysql> SHOW SLAVE STATUS\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.0.11
Master_User: replication
Master_Port: 3306
Connect_Retry: 60 …
Now we have to make db1 replicate from db2. First we have to determine the values for master_log_file and master_log_pos:
(db2) mysql> SHOW MASTER STATUS; +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000001 | 98 | | | +------------------+----------+--------------+------------------+ 1 row in set (0.00 sec) Now we configure replication on db1 with the following command:
(db1) mysql> CHANGE MASTER TO master_host = '192.168.0.12', master_port=3306, master_user='replication',
master_password='replication_password', master_log_file='<file>', master_log_pos=<position>;
Now insert the values return by “show master status” on db2 at the <file> and <position> tags.
Start the slave-process:
(db1) mysql> START SLAVE;Now check if the replication is running correctly on db1:
(db1) mysql> SHOW SLAVE STATUS\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.0.12
Master_User: <replication>
Master_Port: 3306
Connect_Retry: 60 …Replication between the nodes should now be complete. Try it by inserting some data into both db1 and db2 and check that the data will appear on all other nodes.
Install MMM
Create user
Optional: Create user that will be the owner of the MMM scripts and configuration files. This will provide an easier method to securely manage the monitor scripts.
useradd --comment "MMM Script owner" --shell /sbin/nologinmmmdMonitoring host
First install dependencies:
aptitude install liblog-log4perl-perl libmailtools-perl liblog-dispatch-perl libclass-singleton-perl libproc-daemon-perl libalgorithm-diff-perl libdbi-perl libdbd-mysql-perl
Then fetch the latest mysql-mmm-common*.deb and mysql-mmm-monitor*.deb and install it:
dpkg -i mysql-mmm-common_*.deb mysql-mmm-monitor*.deb
Database hosts
On Ubuntu First install dependencies:
aptitude install liblog-log4perl-perl libmailtools-perl liblog-dispatch-perl iproute libnet-arp-perl libproc-daemon-perl libalgorithm-diff-perl libdbi-perl libdbd-mysql-perl
Then fetch the latest mysql-mmm-common*.deb and mysql-mmm-agent*.deb and install it:
dpkg -i mysql-mmm-common_*.deb mysql-mmm-agent_*.deb
On RedHat
yum install -y mysql-mmm-agent
This will take care of all the dependencies, which may include:
Installed:
mysql-mmm-agent.noarch 0:2.2.1-1.el5Dependency Installed:
libart_lgpl.x86_64 0:2.3.17-4 mysql-mmm.noarch 0:2.2.1-1.el5 perl-Algorithm-Diff.noarch 0:1.1902-2.el5 perl-DBD-mysql.x86_64 0:4.008-1.rf perl-DateManip.noarch 0:5.44-1.2.1 perl-IPC-Shareable.noarch 0:0.60-3.el5 perl-Log-Dispatch.noarch 0:2.20-1.el5 perl-Log-Dispatch-FileRotate.noarch 0:1.16-1.el5 perl-Log-Log4perl.noarch 0:1.13-2.el5 perl-MIME-Lite.noarch 0:3.01-5.el5 perl-Mail-Sender.noarch 0:0.8.13-2.el5.1 perl-Mail-Sendmail.noarch 0:0.79-9.el5.1 perl-MailTools.noarch 0:1.77-1.el5 perl-Net-ARP.x86_64 0:1.0.6-2.1.el5 perl-Params-Validate.x86_64 0:0.88-3.el5 perl-Proc-Daemon.noarch 0:0.03-1.el5 perl-TimeDate.noarch 1:1.16-5.el5 perl-XML-DOM.noarch 0:1.44-2.el5 perl-XML-Parser.x86_64 0:2.34-6.1.2.2.1 perl-XML-RegExp.noarch 0:0.03-2.el5 rrdtool.x86_64 0:1.2.27-3.el5 rrdtool-perl.x86_64 0:1.2.27-3.el5
Configure MMM
All generic configuration-options are grouped in a separate file called /etc/mysql-mmm/mmm_common.conf. This file will be the same on all hosts in the system:
active_master_role writer
<host default>
cluster_interface eth0
pid_path /var/run/mmmd_agent.pid
bin_path /usr/lib/mysql-mmm/
replication_user replication
replication_password replication_password
agent_user mmm_agent
agent_password agent_password
</host>
<host db1>
ip 192.168.0.11
mode master
peer db2
</host>
<host db2>
ip 192.168.0.12
mode master
peer db1
</host>
<host db3>
ip 192.168.0.13
mode slave
</host>
<host db4>
ip 192.168.0.14
mode slave
</host>
<role writer>
hosts db1, db2
ips 192.168.0.100
mode exclusive
</role>
<role reader>
hosts db1, db2, db3, db4
ips 192.168.0.101, 192.168.0.102, 192.168.0.103, 192.168.0.104
mode balanced
</role>
Don't forget to copy this file to all other hosts (including the monitoring host).
On the database hosts we need to edit /etc/mysql-mmm/mmm_agent.conf. Change “db1” accordingly on the other hosts:
include mmm_common.conf this db1
On the monitor host we need to edit /etc/mysql-mmm/mmm_mon.conf:
include mmm_common.conf
<monitor>
ip 127.0.0.1
pid_path /var/run/mmmd_mon.pid
bin_path /usr/lib/mysql-mmm/
status_path /var/lib/misc/mmmd_mon.status
ping_ips 192.168.0.1, 192.168.0.11, 192.168.0.12, 192.168.0.13, 192.168.0.14
</monitor>
<host default>
monitor_user mmm_monitor
monitor_password monitor_password
</host>
debug 0
ping_ips are some ips that are pinged to determine whether the network connection of the monitor is ok. I used my switch (192.168.0.1) and the four database server.
Start MMM
Start the agents
(On the database hosts)
Debian/Ubuntu
Edit /etc/default/mysql-mmm-agent to enable the agent:
ENABLED=1Red Hat
RHEL/Fedora does not enable packages to start at boot time per default policy, so you might have to turn it on manually so the agents will start automatically when server is rebooted:
chkconfig mysql-mmm-agent on
Then start it:
/etc/init.d/mysql-mmm-agent start
Start the monitor
(On the monitoring host) Edit /etc/default/mysql-mmm-monitor to enable the monitor:
ENABLED=1
Then start it:
/etc/init.d/mysql-mmm-monitor start
Wait some seconds for mmmd_mon to start up. After a few seconds you can use mmm_control to check the status of the cluster:
mon$ mmm_control show db1(192.168.0.11) master/AWAITING_RECOVERY. Roles: db2(192.168.0.12) master/AWAITING_RECOVERY. Roles: db3(192.168.0.13) slave/AWAITING_RECOVERY. Roles: db4(192.168.0.14) slave/AWAITING_RECOVERY. Roles:
Because its the first startup the monitor does not know our hosts, so it sets all hosts to state AWAITING_RECOVERY and logs a warning message:
mon$ tail /var/log/mysql-mmm/mmmd_mon.warn … 2009/10/28 23:15:28 WARN Detected new host 'db1': Setting its initial state to 'AWAITING_RECOVERY'. Use 'mmm_control set_online db1' to switch it online. 2009/10/28 23:15:28 WARN Detected new host 'db2': Setting its initial state to 'AWAITING_RECOVERY'. Use 'mmm_control set_online db2' to switch it online. 2009/10/28 23:15:28 WARN Detected new host 'db3': Setting its initial state to 'AWAITING_RECOVERY'. Use 'mmm_control set_online db3' to switch it online.
2009/10/28 23:15:28 WARN Detected new host 'db4': Setting its initial state to 'AWAITING_RECOVERY'. Use 'mmm_control set_online db4' to switch it online.Now we set or hosts online (db1 first, because the slaves replicate from this host):
mon$ mmm_control set_online db1 OK: State of 'db1' changed to ONLINE. Now you can wait some time and check its new roles! mon$ mmm_control set_online db2 OK: State of 'db2' changed to ONLINE. Now you can wait some time and check its new roles! mon$ mmm_control set_online db3 OK: State of 'db3' changed to ONLINE. Now you can wait some time and check its new roles! mon$ mmm_control set_online db4 OK: State of 'db4' changed to ONLINE. Now you can wait some time and check its new roles!
原文地址： http://mysql-mmm.org/mmm2:guide