Oracle EBS Material Status FAQ
Oracle EBS MATERIAL STATUS FAQ
Contents
Profile:INV: Material Status Support 14
Material Status FAQ
What’s onhand status
In R12 a new feature, called onhand status. It will take a location status to be material status. Once you enabled your organization as onhand status tracking then you should need to look for material status at onhand level and not at the individual level.
The benefit of this is that if a portion of a pallet is crushed you can separate the pallet into two parts and assign the bad crushed part a status of 'throw away' while assigning the good portion an acceptable status.
The onhand status only persists as long as you have inventory onhand. Once your inventory goes to 0 for a certain lot or location the status no longer exists.
An example of onhand in the material workbench showing status
How to activate onhand level material status control
Activate On-hand Level Material Status Tracking for one organization, Run concurrent request ‘Activate Onhand Level Material Status Tracking’
NOTE: Once an organization is activated as onhand status tracked it cannot be reverted back. If you have accidentally Run Activate On-Hand Material Status, Please refer to Note 1198443.1, The following Enhancement Request was logged suggesting that users should be allowed to deactivate the status: Bug 8626159 - ER to allow de-activate: Allow user to deactivate / de-activate 12.1 Feature: On-hand Status Tracking
What’s the relationship between Onhand Status and Sub/Loc/Lot Status Level
For onhand status tracked organization, status at subinventory, locator and lot level would ONLY be used to default onhand status.
Once you enabled your organization as onhand status tracking then you should need to look for material status at onhand level and not at the individual level. All the status validations will happen considering status at onhand level.
Which level status(Org/Sub/Loc/Lot Level) will be picked as default onhand status(In case doesn’t existing onhand)
The default status comes from the lowest available default at the organization, subinventory, locator, lot (as determined by a PL/SQL call to INV_MATERIAL_STATUS_GRP.get_default_status)
If Org is onhand tracking, and Org level default status is ‘Org_Status’,
Sub level status is ‘Sub_Status’,
Locator level status is ‘Locator_Status’,
Item level status is ‘Item_Status’,
Perform misc receipt for the item, you will see onhand status will pick item level status as default onhand status.
Similarly, for lot controlled item, onhand status will pick default lot status as onhand status.
If user does not set a default status at Item level or Lot level, onhand status will pick locator level status as default onhand status.
There is priority order for onhand status picking, and like following…
Item Status/Lot status > Locator Status > Sub status > Org status
For lot controlled item, it can only set ‘Default Lot Status’, can NOT set ‘Default Material Status’. For plain item, it can only set ‘Default Material Status’, can NOT set ‘Default Lot Status’. So for a item, it’s impossible that item has item level status as well as has lot level status.
Which function is used to get default status id(Code Level)
Function: INV_MATERIAL_STATUS_GRP.get_default_status
This function returns the default material status for an onhand record in the table MOQD
Pseudo-Code:
-
Org is onhand tracking
-
Check whether there is already existing a onhand record, If existing a onhand record, then return status_id of MOQD as default status id.
-
If no onhand existing, Then get default status id from ‘Lot>Locator>Sub>Org’ level default status
-
How To modify onhand material status
Once clicking on the lower level onhand record then going to Tools > Status Update
How To Inquire On Onhand Material Status Updates And History
-
For Lot controlled item, we can check onhand status update history via
Lot Number Form > View Genealogy > Material Transaction Tab > Grade/Status
-
Material Status History Report
-
SQL query to check status history
SELECT MSIB.ORGANIZATION_ID, MP.ORGANIZATION_CODE,MSIB.SEGMENT1,MMSH.PRIMARY_ONHAND,ML.MEANING UPDATE_METHOD,MTR.REASON_NAME,MMSH.*
FROM MTL_MATERIAL_STATUS_HISTORY MMSH,MTL_SYSTEM_ITEMS_B MSIB,MFG_LOOKUPS ML,MTL_TRANSACTION_REASONS MTR,MTL_PARAMETERS MP
WHERE MSIB.INVENTORY_ITEM_ID = MMSH.INVENTORY_ITEM_ID
AND MSIB.ORGANIZATION_ID = MMSH.ORGANIZATION_ID
AND MP.ORGANIZATION_ID = MMSH.ORGANIZATION_ID
AND ML.LOOKUP_CODE = MMSH.UPDATE_METHOD
AND ML.LOOKUP_TYPE = 'MTL_STATUS_UPDATE_METHOD'
AND MTR.REASON_ID(+) = MMSH.UPDATE_REASON_ID
AND MSIB.SEGMENT1 LIKE '&EnterYouritem%'
ORDER BY MSIB.SEGMENT1;
Onhand Status for Intransit Org-Transfer
In intransit Org-Transfer, if onhand not exists in the destination, the Onhand status was not carried over as it does for direct org-transfer(For Direct org-transfer, Status_ID can be carried over from source org to receiving org). Currently the status of the onhand created was using defaulting logic.
Reference: NOTE: 1300203.1, Bug 11719987
For lot controlled item, onhand status is stamped on to lot transaction history. This can be used to default onhand status for intransit org transfer.
(Version of QtyManager.java should be >= 120.26.12010000.25 )
For non-lot controlled, there’s no efficient way getting the status once item completely issued out, hence it is also not in the scope of this project.
Copy/Retain/Default Lot Status for Org-Transfer (Between Non-Onhand status tracking org)
|
Item is lot status enabled, Source org & Destination org are non-onhand enabled.
|
Allow Different material Status = Y
|
Allow Different material Status = N
|
Allow Different material Status = With Exception
|
|
Lot Does NOT Exist in Destination Org |
Intransit/Direct: Default Status from the organization item setup. (See Bug 11688000) |
Intransit: Default Status from the organization item setup. Direct: Copy lot status from source org to destination org. |
Intransit/Direct: Default Status from the organization item setup.
|
|
Lot Exist In Destination org
|
Retain lot status in destination organization
|
Retain lot status in destination organization. (If lot status is different between source org and destination org, Then user can Not perform org transfer for the lot number, Cannot select the lot while shipping) |
Retain lot status in destination organization. (If lot status is different between source org and destination org, Then user can Not perform org transfer for the lot number, Cannot select the lot while shipping) |
Status_ID handle code logic see method createLotNumber in LotTrxManager.java
What’s value of Status_ID in MOQD If Org is Non-Onhand status tracking
Status_ID should be NULL(In some customer’s cases, I saw it is -1) in MOQD, if organization is non-onhand status tracking.
Which status_id is used to stamp into MTL_TRANSACTION_LOT_NUMBERS
-
If org is tracking status at onhand level, Whenever perform a transaction for a lot controlled item, we need to stamp status_id into the lot history table(MTL_TRANSACTION_LOT_NUMBERS), And this status_id in MTL_TRANSACTION_LOT_NUMBERS is populated with the value of status_id from MTL_ONHAND_QUANTITIES_DETAIL.
-
If org is not tracking status at onhand level, we will stamp status_id from mtl_lot_numbers into MTLN
See bug: 10322629
For serial controlled item, What’s value of onhand status_id
In case organization is onhand status enabled, Other than plain item or lot controlled item, For serial controlled item, status_id in MOQD always stamp NULL value, We take status_id in MSN to be material status.
In Material Status Form, The specific transaction type is not in the Allowed/Disallowed txn type list, How can I make my transaction type into Allowed/Disallowed txn type list?
You need enable ‘Status Control’ for the transaction type in Transaction Types Form.
Cumulative Allowed/Disallowed Txn type
A example, Misc receipt item into sub:pt_subb01, locator:55.55.55.., lot number:S00567
Subinv Status: s_sub01, It disallow transaction type: Sales Order issue
Locator Status:s_loc01, It disallow transaction type: Transfer to Consigned
Lot Status: s_lot01, It disallow transaction type: Transfer to Regular
So for the item, it will disallow all above three transaction types.
What’s the ‘Item Status‘
This item status is different with ‘Material Status’.
We use item statuses to provide default values for certain item attributes to control the functionality of an item. When you update the values for a status, all items to which it is assigned are also updated.
Attention: When your current organization is not the Item Master organization, the organization is temporarily changed to the Item Master organization until you exit this window. You can use the statuses created here in all defined organizations.
A status code controls certain item attributes designated as status attributes. The status attributes are:
BOM Allowed
Build in WIP
Customer Orders Enabled
Internal Orders Enabled
Invoice Enabled
Transactable
Purchasable
Stockable
Process Execution Enabled
Recipe Enabled
Associated with each status attribute is a Status Setting option. This option determines whether a status attribute value is set by the status code and is not updatable, defaulted and updatable, or not used when you define an item. You choose a Status Setting for a status attribute with the Item Attributes Controls window. You assign a status code to an item when you define the item.
Material Status Useful SQL Queries
Check whether the organization is onhand status tracking org
SELECT DEFAULT_STATUS_ID
FROM MTL_PARAMETERS WHERE ORGANIZATION_ID = 207;
Query Material Status Definition Header Part
SELECT B.*
FROM MTL_MATERIAL_STATUSES_B B,MTL_MATERIAL_STATUSES_TL T
WHERE B.STATUS_ID = T.STATUS_ID
AND T.STATUS_CODE = '&StatusCode';
For specific status, Check whether specific transaction type is allowed
SELECT IS_ALLOWED
FROM MTL_STATUS_TRANSACTION_CONTROL
WHERE STATUS_ID = &StatusID
AND TRANSACTION_TYPE_ID = &TxnTypeID;
Or use PL/SQL function to query IS_TRX_ALLOWED
SELECT INV_MATERIAL_STATUS_GRP.IS_TRX_ALLOWED_WRAP(&StatusID,&TxnTypeID)
FROM DUAL;
Use location information to check IS_STATUS_APPLICABLE
DECLARE
result VARCHAR2 (2);
v_user_id NUMBER := 1068;
v_resp_id NUMBER := 20634;
v_appl_id NUMBER := 401;
BEGIN
FND_GLOBAL.apps_initialize (v_user_id, v_resp_id, v_appl_id);
fnd_global.set_nls_context ('AMERICAN');
SELECT INV_MATERIAL_STATUS_GRP.IS_STATUS_APPLICABLE
('TRUE',1,18,'Y',NULL,207,1416050,'tp_sub',7919,'test01',NULL,'O')
is_status_applicable
INTO result
FROM DUAL;
DBMS_OUTPUT.put_line ('is_status_applicable=' || result);
END;
Material Status Validation Sample Query for Lot/Sub LOV
Lot Number LOV Sample
SELECT MLN.LOT_NUMBER, MIN (MLN.EXPIRATION_DATE) EXPIRATION_DATE
, PARENT_LOT_NUMBER, GRADE_CODE
FROM MTL_LOT_NUMBERS MLN
WHERE MLN.INVENTORY_ITEM_ID
= :MTL_LOT_REFERENCE.INVENTORY_ITEM_ID
AND MLN.ORGANIZATION_ID = :MTL_LOT_REFERENCE.ORG_ID
AND NVL (MLN.DISABLE_FLAG, '2') = '2'
AND INV_MATERIAL_STATUS_GRP.IS_STATUS_APPLICABLE (
:PARAMETER.WMS_INSTALLED
, :MTL_LOT_REFERENCE.TRX_STATUS_ENABLED
, :MTL_LOT_REFERENCE.TRANSACTION_TYPE_ID
, :MTL_LOT_REFERENCE.LOT_STATUS_ENABLED
, NULL
, :PARAMETER.ORG_ID
, :MTL_LOT_REFERENCE.INVENTORY_ITEM_ID
, NULL
, NULL
, MLN.LOT_NUMBER
, NULL
, 'O'
) = 'Y'
GROUP BY MLN.LOT_NUMBER, PARENT_LOT_NUMBER, GRADE_CODE
ORDER BY 2, MLN.LOT_NUMBER
Subinventory LOV Sample
SELECT SECONDARY_INVENTORY_NAME ,DESCRIPTION,
QUANTITY_TRACKED, ASSET_INVENTORY, LOCATOR_TYPE,
MATERIAL_ACCOUNT
FROM MTL_SUBINVENTORIES_VAL_V
WHERE ORGANIZATION_ID = :PARAMETER.ORG_ID
AND INV_MATERIAL_STATUS_GRP.IS_STATUS_APPLICABLE (
:PARAMETER.WMS_INSTALLED
, :MTL_TRX_HEADER.TRX_STATUS_ENABLED
, DECODE(:MTL_TRX_HEADER.TRANSACTION_TYPE_ID,-99,
:MTL_TRX_LINE.TRANSACTION_TYPE_ID,:MTL_TRX_HEADER.TRANSACTION_TYPE_ID)
, NULL
, NULL
, :PARAMETER.ORG_ID
, :MTL_TRX_LINE.INVENTORY_ITEM_ID
, SECONDARY_INVENTORY_NAME
, NULL
, NULL
, NULL
, NVL(:MTL_TRX_HEADER.MATERIAL_STATUS_OBJECT_TYPE,'Z') ) = 'Y'
ORDER BY SECONDARY_INVENTORY_NAME
Profile:INV: Material Status Support
This profile option determines whether material status is enforced. The available values are Yes and No. This profile option is updateable only at the site level. If your installation never uses material status, and you set this profile option to No, then system performance improves slightly.
转载请注明出处:http://blog.csdn.net/pan_tian/article/details/7489165