关于SAP F4 Search Help Exit Module
1. 机能作用
Search Help Exit是用于对标准帮助进行扩充,以便与更加灵活的使用.
2. 使用场合
标准的Search Help其本身就可以进行一些简单的动态表示设定,比如:对选择条件的初期值进行设定(固定值,SAP Memory params(BUK)等.
但是,比如选择条件并非是DB字段的话,就需要用Search Help Exit Module进行扩充了.
3. 使用方法
- 执行T-cd:SE11
- 检索Help设定画面的[检索Help Exit]中输入Search Help Exit Module名
- 执行T-cd:SE37,进入Module Editer
- Help Exit Module的编写
Module模版可以拷贝自既存的标准Module[F4IF_SHLP_EXIT_EXAMPLE]
实例
FUNCTION F4IF_SHLP_EXIT_EXAMPLE.
*"----------------------------------------------------------------------
*"*"Lokale Schnittstelle:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCT
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
*"----------------------------------------------------------------------
* EXIT immediately, if you do not want to handle this step
IF CALLCONTROL-STEP <> 'SELONE' AND
CALLCONTROL-STEP <> 'SELECT' AND
" AND SO ON
CALLCONTROL-STEP <> 'DISP'.
EXIT.
ENDIF.
*"----------------------------------------------------------------------
* STEP SELONE (Select one of the elementary searchhelps)
*"----------------------------------------------------------------------
* This step is only called for collective searchhelps. It may be used
* to reduce the amount of elementary searchhelps given in SHLP_TAB.
* The compound searchhelp is given in SHLP.
* If you do not change CALLCONTROL-STEP, the next step is the
* dialog, to select one of the elementary searchhelps.
* If you want to skip this dialog, you have to return the selected
* elementary searchhelp in SHLP and to change CALLCONTROL-STEP to
* either to 'PRESEL' or to 'SELECT'.
IF CALLCONTROL-STEP = 'SELONE'.
* PERFORM SELONE .........
EXIT.
ENDIF.
*"----------------------------------------------------------------------
* STEP PRESEL (Enter selection conditions)
*"----------------------------------------------------------------------
* This step allows you, to influence the selection conditions either
* before they are displayed or in order to skip the dialog completely.
* If you want to skip the dialog, you should change CALLCONTROL-STEP
* to 'SELECT'.
* Normaly only SHLP-SELOPT should be changed in this step.
IF CALLCONTROL-STEP = 'PRESEL'.
* PERFORM PRESEL ..........
EXIT.
ENDIF.
*"----------------------------------------------------------------------
* STEP SELECT (Select values)
*"----------------------------------------------------------------------
* This step may be used to overtake the data selection completely.
* To skip the standard seletion, you should return 'DISP' as following
* step in CALLCONTROL-STEP.
* Normally RECORD_TAB should be filled after this step.
* Standard function module F4UT_RESULTS_MAP may be very helpfull in this
* step.
IF CALLCONTROL-STEP = 'SELECT'.
* PERFORM STEP_SELECT TABLES RECORD_TAB SHLP_TAB
* CHANGING SHLP CALLCONTROL RC.
* IF RC = 0.
* CALLCONTROL-STEP = 'DISP'.
* ELSE.
* CALLCONTROL-STEP = 'EXIT'.
* ENDIF.
EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
*"----------------------------------------------------------------------
* STEP DISP (Display values)
*"----------------------------------------------------------------------
* This step is called, before the selected data is displayed.
* You can e.g. modify or reduce the data in RECORD_TAB
* according to the users authority.
* If you want to get the standard display dialog afterwards, you
* should not change CALLCONTROL-STEP.
* If you want to overtake the dialog on you own, you must return
* the following values in CALLCONTROL-STEP:
* - "RETURN" if one line was selected. The selected line must be
* the only record left in RECORD_TAB. The corresponding fields of
* this line are entered into the screen.
* - "EXIT" if the values request should be aborted
* - "PRESEL" if you want to return to the selection dialog
* Standard function modules F4UT_PARAMETER_VALUE_GET and
* F4UT_PARAMETER_RESULTS_PUT may be very helpfull in this step.
IF CALLCONTROL-STEP = 'DISP'.
* PERFORM AUTHORITY_CHECK TABLES RECORD_TAB SHLP_TAB
* CHANGING SHLP CALLCONTROL.
*--------------对象DATA抽出检索画面未表示前的处理(改修代码一般在这里完成)------------------
* SHLP-FIELDDESCR里存放有检索表示画面中个项目的基本情况(项目名,类型,长度等)
* RECORD_TAB中存放有实际的表示DATA,并且各个表示项目内容被连接成一个字符串存放与STRING字段中
* 利用RECORD_TAB和SHLP-FIELDDESCR就可以对表示DATA进行该修了
. 读取某个项目的基本情况
READ TABLE SHLP-FIELDDESCR…
. 取得该项目在RECORD_TAB-STRING中的开始位置与长度
OFFSET = SHLP-FIELDDESCR-OFFSET / 2
OUTPUTLEN = SHLP-FIELDDESCR-OUTPUTLEN
. 循环RECORD_TAB，取得RECORD_TAB中的每条数据的该当项目的值
RECORD_TAB-STRING+OFFSET(OUTPUTLEN).
EXIT.
ENDIF.
ENDFUNCTION.