POJ 2256 Artificial Intelligence?

原题地址：http://poj.org/problem?id=2256

Artificial Intelligence?

Time Limit:1000MS		Memory Limit:65536K

Description

Physics teachers in high school often think that problems given as text are more demanding than pure computations. After all, the pupils have to read and understand the problem first!
So they don't state a problem like "U=10V, I=5A, P=?" but rather like "You have an electrical circuit that contains a battery with a voltage of U=10V and a light-bulb. There's an electrical current of I=5A through the bulb. Which power is generated in the bulb?".
However, half of the pupils just don't pay attention to the text anyway. They just extract from the text what is given: U=10V, I=5A. Then they think: "Which formulae do I know? Ah yes, P=U*I. Therefore P=10V*5A=500W. Finished."
OK, this doesn't always work, so these pupils are usually not the top scorers in physics tests. But at least this simple algorithm is usually good enough to pass the class. (Sad but true.)
Today we will check if a computer can pass a high school physics test. We will concentrate on the P-U-I type problems first. That means, problems in which two of power, voltage and current are given and the third is wanted.

Your job is to write a program that reads such a text problem and solves it according to the simple algorithm given above.

Input

The first line of the input will contain the number of test cases.
Each test case will consist of one line containing exactly two data fields and some additional arbitrary words. A data field will be of the form I=xA, U=xV or P=xW, where x is a real number. Directly before the unit (A,V or W) one of the prefixes m (milli), k (kilo) and M (Mega) may also occur. To summarize it: Data fields adhere to the following grammar:
DataField ::= Concept '=' RealNumber [Prefix] Unit

Concept   ::= 'P' | 'U' | 'I'

Prefix    ::= 'm' | 'k' | 'M'

Unit      ::= 'W' | 'V' | 'A'

Additional assertions:

• The equal sign ('=') will never occur in an other context than within a data field.
  
• There is no whitespace (tabs,blanks) inside a data field.
  
• Either P and U, P and I, or U and I will be given.

Output

For each test case, print three lines:

• a line saying "Problem #k" where k is the number of the test case
  
• a line giving the solution (voltage, power or current, dependent on what was given), written without a prefix and with two decimal places as shown in the sample output
  
• a blank line

Sample Input

3
If the voltage is U=200V and the current is I=4.5A, which power is generated?

A light-bulb yields P=100W and the voltage is U=220V. Compute the current, please.

bla bla bla lightning strike I=2A bla bla bla P=2.5MW bla bla voltage?

Sample Output

Problem #1
P=900.00W


Problem #2
I=0.45A


Problem #3
U=1250000.00V

由于开始以为是m是million的意思，WA了好多次，郁闷........

AC代码如下

/**************************************************************************
* Problem: POJ 2256 Artificial Intelligence?
* Copyright 2011 by Yan
* DATE:
* E-Mail: [email protected]
************************************************************************/
#include <stdio.h>

char cache[2000];

char op1[50];
char op2[50];
double dop1,dop2;

int len;

void get_op(int p1,int p2)
{
	int index=p1;
	int op_index=0;
	int i;
	char tmp;/*存放单位字符*/

	while(cache[++index]!='A'&& cache[index]!='W'&& cache[index]!='V')
	{
		op1[op_index++]=cache[index];
	}

	op1[op_index]='\0';
	tmp=op1[op_index-1];

	if(tmp=='m'||tmp=='k'||tmp=='M') op1[op_index-1]='\0';/*从字符串中取出单位*/

	sscanf(op1,"%lf",&dop1);
	switch (tmp)
	{
		case 'k':dop1=dop1*1000.0;break;
		case 'm':dop1=dop1*0.001;break;
		case 'M':dop1=dop1*1000000.0;break;
	}

	index=p2;
	op_index=0;
	while(cache[++index]!='A'&& cache[index]!='W'&& cache[index]!='V')
	{
		op2[op_index++]=cache[index];
	}
	op2[op_index]='\0';
	tmp=op2[op_index-1];

	if(tmp=='m'||tmp=='k'||tmp=='M') op1[op_index-1]='\0';/*从字符串中取出单位*/

	sscanf(op2,"%lf",&dop2);
	switch (tmp)
	{
		case 'k':dop2=dop2*1000.0;break;
		case 'm':dop2=dop2*0.001;break;
		case 'M':dop2=dop2*1000000.0;break;
	}

}
int main()
{
	/*freopen("input","r",stdin);*/
	int n,i,j;
	int index[2];/*存放两个等号的位置*/
	int cnt;
	double ans;
	scanf("%d ",&n);
	for(i=1;i<=n;i++)
	{
		gets(cache);
		/*puts(cache);*/
		len=strlen(cache);

		cnt=0;

		for(j=0;j<len;j++)
		{
			if(cache[j]=='=') index[cnt++]=j;
			if(cnt==2) break;
		}/*扫描到两个等号*/

		get_op(index[0],index[1]);/*获取操作数和操作*/
		printf("Problem #%d\n",i);
		if( (cache[index[0]-1]=='U'&&cache[index[1]-1]=='I') || (cache[index[0]-1]=='I'&&cache[index[1]-1]=='U'))
		{
			printf("P=%.2fW\n\n",dop1*dop2);
		}
		else if( (cache[index[0]-1]=='P'&&cache[index[1]-1]=='I') || (cache[index[0]-1]=='I'&&cache[index[1]-1]=='P'))
		{
			if(cache[index[0]-1]=='P')
				printf("U=%.2fV\n\n",dop1/dop2);
			else printf("U=%.2fV\n\n",dop2/dop1);
		}
		else if( (cache[index[0]-1]=='U'&&cache[index[1]-1]=='P') || (cache[index[0]-1]=='P'&&cache[index[1]-1]=='U'))
		{
			if(cache[index[0]-1]=='P')
				printf("I=%.2fA\n\n",dop1/dop2);
			else printf("I=%.2fA\n\n",dop2/dop1);
		}
	}
	return 0;
}