Jetty 5

Downloading
============
Jetty is can be downloaded in one of the following distribution files:

Jetty-5.0.X.tar.gz - This is the binary release for JDK 1.4

Jetty-5.0.X-extra.tar.gz - Extra modules for Jetty, including:
Jetty demo
JettyPlus
jdk 1.2 & 1.3 support
log4j
ftp client
win32 and unix start scripts

Jetty-5.0.X-src.tar.gz - A source only distribution which needs
to be build using ant. This distribution also excludes the demo.

Jetty-5.0.X-all.tar.gz - Everything in one jar.

Quick Start
===========

Unpack the jetty release Jetty-5.0.x.tar.gz or Jetty-5.0.x-all.tar.gz
using an archive tool such as tar or winzip.

The default configuration file (etc/jetty.xml) can be run with:

cd Jetty-5.0.x
java -jar start.jar

Then point your browser at http://localhost:8080

The demo server (in the all or extra bundle ) can be run with the commands

cd Jetty-5.0.x
java -jar start.jar etc/demo.xml

The JMX variants may be started with

java -Dmain.class=org.mortbay.xml.XmlConfiguration -jar start.jar etc/jetty-jmx.xml

or

java -Dmain.class=org.mortbay.xml.XmlConfiguration -jar start.jar etc/demo-jmx.xml

[ NB. When using java >= 1.5 you will need to add -Djavax.management.builder.initial=mx4j.server.MX4JMBeanServerBuilder
to the command line to avoid a clash with the builting JMX implementation ]

Jetty start.jar
===============

The start.jar file in the Jetty distribution may be run with

java -jar start.jar <configfile> ...

For example

java -jar start.jar etc/admin.xml etc/demo.xml

On some systems with graphical file browsers, it may be possible to start
jetty by double clicking on this jar file. For more details see

$JETTY_HOME/src/org/mortbay/start/README.txt
or
http://jetty.mortbay.org/javadoc/org/mortbay/start/Main.html

If jetty is not being started from the current directory, then
the jetty.home property should be set:

java -Djetty.home=C:/jetty -jar start.jar <configfile> ...

If JSPs do not work with this start method, you may want to clearly specify
the location of the JDK so the compiler can be accessed:

java -Djava.home=C:/j2sdk1.4.1 -jar start.jar <configfile> ...

If an extra classpaths are needed, they can be added with the jetty.class.path
property:

java -Djetty.class.path=/usr/share/java -jar start.jar <configfile> ...

If no configuration file is provided, start.jar will use etc/admin.xml and
etc/jetty.xml

The system propoerty -DDEBUG can be set to see the workings of start.jar

java -DDEBUG -jar start.jar

If you have your own start configuration file (see javadoc), you can use
it with

java -DSTART=mystart.config -jar start.jar

Jetty stop.jar
==============

Programs started with the start.jar mechanism may be stopped with the
stop.jar:

java -jar stop.jar

This connects via a local port to stop the server. The default port can be set with the
STOP.PORT system property (default 8079 and a port of < 0 disables the stop mechanism).
If the STOP.KEY system property is set, then a random key is generated and
written to stdout. This key must be passed to the stop.jar. eg

[540] java -DSTOP.PORT=9999 -DSTOP.KEY -jar start.jar
1rukbu7owi3uo
17:39:49.082 EVENT Starting Jetty/4.2.10pre0
...

[526] java -DSTOP.PORT=9999 -DSTOP.KEY=1rukbu7owi3uo -jar stop.jar

Jetty with Ant
==============

If you have the ant java build tool ant installed, you may use that to
start jetty. The demo can be started with:

Unix: ant demo
Win32: ant.bat demo

The JMX enabled demo can be started with

Unix: ant demo.jmx
Win32: ant.bat demo.jmx

The default jetty.xml configuration can be started with:

Unix: ant run
Win32: ant.bat run

An alternative configuration file can be run with

Unix: ant -Djetty.run=acme.xml run
Win32: ant.bat -Djetty.run=acme.xml run

Manual Start
============

If you are using jdk1.4, you should use the path (or non-unix equivalent):

CLASSPATH=/
$JETTY_HOME/lib/org.mortbay.jetty.jar:/
$JETTY_HOME/lib/javax.servlet.jar:/
$JETTY_HOME/ext/jasper-runtime.jar:/
$JETTY_HOME/ext/jasper-compiler.jar:/
$JETTY_HOME/ext/xercesImpl.jar

For jdk1.2 or jdk1.3 us the following classpath, you need to use an
alternative jetty jars and add the XML support. Thus the classpath
to use is:

CLASSPATH=/
$JETTY_HOME/lib/org.mortbay.jetty-jdk1.2.jar:/
$JETTY_HOME/lib/javax.servlet.jar:/
$JETTY_HOME/ext/jasper-runtime.jar:/
$JETTY_HOME/ext/jasper-compiler.jar:/
$JETTY_HOME/ext/xercesImpl.jar:/
$JETTY_HOME/ext/xml-apis.jar:/
$JETTY_HOME/ext/xmlParserAPIs.jar

To use the default SSL provider you may also need to add the the jars below,
which is a merge of the jsse, jnet and jcert jars from the JSSE package
(see $JETTY_HOME/demo/webapps/jetty/doc/JsseSSL.html for more details):

$JETTY_HOME/ext/jnet.jar (not required for JDK 1.4.1)
$JETTY_HOME/ext/jcert.jar
$JETTY_HOME/ext/jsse.jar

To use JMX the classpath must also include:

$JETTY_HOME/ext/jmxri.jar
$JETTY_HOME/ext/jmxtools.jar

To run JSP with the JDK compiler, you will also need to add the
jar containing the JDK compiler (if you wish to use another compiler
you will have to configure jasper) and the ant.jar from jakarta-ant 1.5
or later.

If your JVM supports the -server flag, then it can be a useful
option to include when starting Jetty. It can reduce memory size and
avoid some JVM crashes.

External Jars
=============

The ext directories within the Jetty hierarchy contain external libraries
that are required to compile run Jetty. Many of these jars may now be
provided by your JVM or elsewhere on your classpath. If so, these jars
can probably be safely removed from the Jetty distribution.

A SAX XML parser is required by webapp components of Jetty and the xerces
parser is included as well as the javax apis for this:

$JETTY_HOME/ext/xercesImpl.jar
$JETTY_HOME/ext/xml-apis.jar
$JETTY_HOME/ext/xmlParserAPIs.jar

If JSP is to be used, then the Jasper jars from jakarta and an ant jar must
be present. Jetty includes Jasper2, but jasper1 may be safely substituted:

$JETTY_HOME/ext/jasper-compiler.jar
$JETTY_HOME/ext/jasper-runtime.jar
$JETTY_HOME/ext/ant.jar

If SSL is to be used then the JSSE libraries may need to be present plus
the reference implementation from sun:

$JETTY_HOME/ext/jnet.jar
$JETTY_HOME/ext/jcert.jar
$JETTY_HOME/ext/jsse.jar

If SSL is to be used, then the JMX library and tools need present:

$JETTY_HOME/ext/jmxri.jar
$JETTY_HOME/ext/jmxtools.jar

There are additional ext jars that may be included in the extra/ext
directory. These are docuented elsewhere.

LOGGING AND DEBUGGING
=====================

Since 5.0, Jetty has used jakarta commons logging. This is a facade over
other logging mechanism. By default, this is configured in start.config
to use the Jetty logger. Debugging can be enabled with -DDEBUG or see the
jetty.xml and demo.xml files for more examples.

To use the JDK logger:
java -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -jar start.jar

To use log4j:
java -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Log4JLogger -jar start.jar

Note that any jetty logging config should be removed from the configuration files before using another log mechanism

For more information see the Jetty Tutorial
http://jetty.mortbay.org/jetty/tut/logging.html

Package contents
================

src - The source for the HTTP server and servlet container.
lib - The jars of the compile jetty code.
ext - The external jars needed for the main jetty server.
etc - The config files and resources.
demo - Demos of the HTTP server and servlet container.
test - Test harnesses.
webapps - The default location for war files or webapps.
webapps/template
- A template webapp that can be used to base your own on.
extra - Directory of optional extras
/plus - Extended jetty with JNDI, transaction, JAAS & log4j
/ftp - FTP client
/j2ee - J2EE distributions and integration
/jdk1.2 - Classes for JDK < 1.4
/loadbalancer - A simple load balancer

Support FAQ
===========
+ The [email protected] list is for jetty related support
questions. General questions about servlets and/or java should not
be posted here.

+ Before posting, please check the archives that the question has
not been asked before by checking the archives at
http://groups.yahoo.com/group/jetty-support

+ Please also read the improving documentation at
http://jetty.mortbay.org/jetty/resources.html

Please read the tutorial, then read it again.

+ Jetty 4 configuration is based around the concept of contexts,
which were introduced in the 2.2 servlet specification. It is
important to understand contexts when configuring Jetty and it may
be worth while reading the 2.4 servlet specification in addtion to
the Jetty documentation.

+ Before posting, try increasing the debug output of Jetty. Debugging
control is described in the README file. Even if you cannot spot the
problem in the output, it may be valuable to make the trace available
to whoever helps you with your problem.

+ When posting a support question, please provide as much information as
possible, which should include:
- The version of Jetty.
- The version of java.
- Your Operating system.
- Overview of your configuration.
- What URL was tried.
- What browser and what it rendered.
- Details of the problem, including stack traces and/or log files.
- Details of what you have tried to make it work.

+ For JSP problems, consider checking JSP forums first. Jetty uses the
Jasper engine from jakarta.apache.org - bugs and all.
If you can write a small JSP that demonstrates your problem, you
will get much faster results.

+ For general class loading problems, the solution is often best to start
with your classes on the system classpath until you are more familiar
with the configuration of Contexts.

+ If in doubt about if you should post or not - please post, we are pretty
friendly and will tell you nicely if it is not appropriate.

Building from source
====================
An Ant build file is included in build.xml. Ant is available from

http://jakarta.apache.org/ant/index.html

You will also need the optional ant junit task and the junit jar in the
lib directory of ant (this is a common setup for ant distributions).
The ant.properties file can be edited to customize the environment and
then the following ant targets can be used to build and run Jetty:

ant - Build source
ant all - Build everything
ant test - Build and run tests
ant demo - Build and run the demo
ant dist - Build the distriutions
ant clean - Remove generated files

Test Harnesses
==============
The class org.mortbay.http.TestRFC2616 is a test harness linked
to the RFC document. This and the other test harnesses can be run with

java org.mortbay.util.TestHarness
java org.mortbay.http.TestHarness

Note that the test harnesses are not in the jar file, so you will need
to build all the source and run with the source hierarchy in the CLASSPATH.

Running Watchdog Tests
======================
See the etc/watchdog.xml configuration file comments for instructions
on how to run the Jakarta Watchdog 4.0 tests.

Distribution
============
Jetty distributions and information is available from:

http://jetty.mortbay.org
http://sourceforge.net/project/jetty
ftp://jetty.mortbay.org/pub

How to Contribute
=================
Comments, contributions, feedback, bugs, testing, etc. please....

The mailing lists are the best place to start:

http://www.yahoogroups.com/group/jetty-announce/
http://www.yahoogroups.com/group/jetty-discuss/
http://www.yahoogroups.com/group/jetty-support/
http://sourceforge.net/mail/?group_id=7322

NOTES
=====

HTTP Server vs Servlet Server
-----------------------------
Jetty can be considered both as a HTTP server with it own powerful
extension architecture and as a Servlet Container implementing the
standards for web applications. The style of configuration of these
two view is significantly different. The Jetty tutorial provided
by the demo server should be read in detail to understand the
difference between these two approaches.

JDK 1.4 Support
---------------
Jetty is written for JDK 1.4. However it can be built and run on 1.3
and 1.2. The build file for this and the source changes required are
in the $JETTY_HOME/extra/jdk1.2 directory.

These build an alternate jetty jar called org.mortbay.jetty-jdk1.2.jar

Minimal HTTP jar
----------------
A minimal HTTP server can be built with the ant target mini.http.jar.
This builds the lib/org.mortbay.http.jar file which contains:
+ Full HTTP/1.1 server
+ Basic Authentication support
+ ResourceHandler with cache and range support.
+ DumpHandler as dynamic content demo.
+ NCSA request log
+ javax.servlet.http.Cookie support.

The mini server can be run with

java -jar lib/org.mortbay.http.jar

JSP Engine
----------
Jetty uses the Jasper JSP engine from jakarta to provide java
server pages. Jetty switched to use Jasper2 for the 4.1.x releases,
as it promises greater performance and standards compliance.
However, jasper2 requires the ant.jar in the classpath and still
has some backwards compatibility issues with older JSPs.

The jasper2 engine can simply be replace with the jasper1 engine
by replacing the org.apache.jasper.jar from a Jetty 4.0 release.

JSP Classpaths
--------------
The context classloader is passed to the Jasper JspServlet and
is used as the parent loader of the JspLoader.
A file classpath is also passed for used by the JSP compiler. Note
that if the context is a packed WAR file, then there is no
reasonable file based classpath that can be passed to the compiler.

If this proves to be a problem for you, then unpack your WAR files
(which is what most other containers do by default anyway).

Unix SystemV Init
-----------------
Jetty includes a SystemV Init script that has been tested under
RedHat Linux 6.2. This script allows Jetty to be automatically started
and stoped when the operating system is booted or shutdown.

To use the script, follow these steps:

- Login as root.

- Make the script executable:

chmod u+x $JETTY_HOME/bin/jetty.sysvinit

- Place a symbolic link to the script in the /etc/rc.d/init.d directory:

ln -s $JETTY_HOME/bin/jetty.sysvinit /etc/rc.d/init.d/jetty

you can also copy the script there. Just remember to make it executable.

- Edit the script and make sure that the JETTY_HOME and JAVA_HOME
variables are set properly.

- Enable the script:

chkconfig --add jetty
chkconfig --level 345 jetty on

you can also use ntsysv if available for this purpose.

To start the jetty server for the first time without rebooting the machine,
execute:

/etc/rc.d/init.d/jetty start

Check /var/log/messages to see if everything worked fine.

The Jetty SystemV Init script uses the $JETTY_HOME/bin/jetty.sh shell
script to launch Jetty. Read the shell script's documentation above,
or the one in the script's initial comments to learn about available
configuration options.

Win32 Service
-------------
The win32 directory contains instructions of how to start Jetty as
a win32 service.

Web Application Security
------------------------
Jetty makes the following interpretations for the configuration of security
constraints within a web.xml file:

+ Methods PUT, DELETE and GET are disabled unless explicitly enabled.

+ If multiple security-constraints are defined, the most specific
applies to a request.

+ A security-constraint an empty auth-constraint forbids all access by any
user:

<security-constraint>
<web-resource-collection>
<web-resource-name>Forbidden</web-resource-name>
<url-pattern>/auth/noaccess/*</url-pattern>
</web-resource-collection>
<auth-constraint/>
</security-constraint>

+ A security constraint with an auth constraint with a role of "*"
gives access to all authenticated users:

<security-constraint>
<web-resource-collection>
<web-resource-name>Any User</web-resource-name>
<url-pattern>/auth/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>*</role-name>
</auth-constraint>
</security-constraint>

+ A security-constraint with no auth-constraint and no data contraint
gives access to any request:

<security-constraint>
<web-resource-collection>
<web-resource-name>Relax</web-resource-name>
<url-pattern>/auth/relax/*</url-pattern>
</web-resource-collection>
</security-constraint>

+ By default or when the org.mortbay.util.FileResource.checkAliases is not false,
then the FileResouce class compares the absolutePath and canonicalPath and
treats the resource as not found if they do not match. THIS means
that win32 platforms need to exactly match the case of drive letters
and filenames.

+ Dynamic servlets by default, can only be loaded from the context classpath.
Use ServletHandler.setServeDynamicSystemServlets to control this behaivour.

It is strongly recommended that secure WebApplications take following
approach. All access should be denied by default with

<security-constraint>
<web-resource-collection>
<web-resource-name>Default</web-resource-name>
<url-pattern>/</url-pattern>
</web-resource-collection>
<auth-constraint/>
</security-constraint>

Specific access should then be granted with constraints like:

<security-constraint>
<web-resource-collection>
<url-pattern>/public/*</url-pattern>
<url-pattern>/images/*</url-pattern>
<http-method>GET</http-method>
<http-method>HEAD</http-method>
</web-resource-collection>
<web-resource-collection>
<url-pattern>/servlet/*</url-pattern>
<http-method>GET</http-method>
<http-method>HEAD</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>*</role-name>
</auth-constraint>
</security-constraint>

Session Security
----------------
Jetty uses the standard java.util.Random class to generate session IDs. This
may be insufficient for high security sites. The SessionManager instance can
be initialized with a more secure random number generator, such as
java.security.SecureRandom. The XML to do this to a webapplication is:

<Call name="addWebApplication">
<Arg>/myapp/*</Arg>
<Arg><SystemProperty name="jetty.home" default="."/>/demo/webapps/myapp</Arg>
<Arg><SystemProperty name="jetty.home" default="."/>/etc/webdefault.xml</Arg>
<Arg type="boolean">false</Arg>
<Call name="getServletHandler">
<Set name="sessionManager">
<New class="org.mortbay.jetty.servlet.HashSessionManager">
<Arg><New class="java.security.SecureRandom"/></Arg>
</New>
</Set>
</Call>
</Call>

Note: initialising the SecureRandom object is a one-off time consuming
operation which may cause the initial request to take much longer.