JLink Support for the Nuvoton NUC1xx devices

http://forum.segger.com/index.php?page=Thread&threadID=1441

Friday, April 19th 2013, 7:25pm

 

Hi Martin,

Support for the Nuvoton NUC1xx devices has been added in V4.69b of the J-Link software (beta).
Please note that the connector on the NuMicro SDK is non-standard and not compatible to anything we have seen so far.
We connected ICE_DAT, ICE_CLK, ICE_RST, GND and VTref (3.3V or 5V depending on how the board is jumpered) manually to J-Link to make it work.
Note that the 5V present on pin 1 of the connector on the board can NOT be used as VTref since there is a catch diode placed on the board which inhibits to provide supply to the buffers of J-Link. We recommend to get VTref from the jumper that is used to jumper between 3.3V and 5V.

Download-Link:  http://www.segger.com/jlink-software-beta-version.html


Best regards
Alex

你可能感兴趣的:(device)