RFIDler——软件RFID阅读器/读卡器/模拟器

https://www.kickstarter.com/projects/1708444109/rfidler-a-software-defined-rfid-reader-writer-emul

https://github.com/ApertureLabsLtd/RFIDler

http://adamsblog.aperturelabs.com/2013/08/rfidler-open-source-software-defined.html

The Goal

To produce a tool for Low Frequency (125-134Khz) RFID research projects, as well as a cut-down (Lite) version that can be embedded into your own hardware projects. The fully featured version we hope to bring in for around £30.00, and the Lite version for under £20.00.

Features

We have written extensive firmware which includes a user interface and an API to allow easy use of the system and to allow you to explore, read and emulate a wide range of low frequency RFID tags.

• Utilise ANY modulation scheme, including bi-directional protocols
• Write data to tag
• Read data from tag
• Emulate tag
• Sniff conversations between external reader & tag
• Provide raw as well as decoded data
• Built-in antenna
• External antenna connection
• USB power and user interface
• TTL interface
• GPIO interface
• JTAG interface for programming
• USB Bootloader for easy firmware updating
• External CLOCK interface if not using processor

• External power connector if not using USB

The hardware gives you the capability to read/write/emulate more or less any LF tag, but we've also taken the hard work out of most of them by implementing all the tag types we can find in the public domain. These include:

• EM4102 / Unique
• Hitag 1/2/S
• FDX-B (ISO 11784/5 Animal Standard)
• Q5
• T55xx
• Indala
• Noralsy
• HID Prox
• NXP PCF7931 
• Texas Instruments
• VeriChip
• FlexPass