AspectJ使用实例
一、在 Spring 中启用 AspectJ 注解支持
-
1要在 Spring 应用中使用 AspectJ 注解, 必须在 classpath 下包含 AspectJ 类库: aopalliance.jar、aspectj.weaver.jar 和 spring-aspects.jar
maven 引入<dependency> <groupId>org.springframeworkgroupId> <artifactId>spring-aopartifactId> <version>4.1.9.RELEASEversion> dependency> <dependency> <groupId>org.springframeworkgroupId> <artifactId>spring-aspectsartifactId> <version>4.1.9.RELEASEversion> dependency> <dependency> <groupId>org.aspectjgroupId> <artifactId>aspectjrtartifactId> <version>1.6.8version> dependency> <dependency> <groupId>org.aspectjgroupId> <artifactId>aspectjweaverartifactId> <version>1.6.8version> <scope>runtimescope> dependency> - 2将 aop Schema 添加到 根元素中.
-
3要在 Spring IOC 容器中启用 AspectJ 注解支持, 只要在 Bean 配置文件中定义一个空的 XML 元素
<aop:aspectj-autoproxy>aop:aspectj-autoproxy> -
4当 Spring IOC 容器侦测到 Bean 配置文件中的 元素时, 会自动为与 AspectJ 切面匹配的 Bean 创建代理.
二、AspectJ 支持 5 种类型的通知注解:
- @Before: 前置通知, 在方法执行之前执行
- @After: 后置通知, 在方法执行之后执行
- @AfterRunning: 返回通知, 在方法返回结果之后执行
- @AfterThrowing: 异常通知, 在方法抛出异常之后
- @Around: 环绕通知, 围绕着方法执行
2.1、使用之前的 计算器接口和实现类 ArithmeticCalculator.java , ArithmeticCalculatorImpl.java
@Component("arithmeticCalculator")
public class ArithmeticCalculatorImpl implements ArithmeticCalculator{} 2.2、在xml中增加扫描注解和aspectj的支持
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-4.1.xsd
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.1.xsd">
<context:component-scan base-package="com.hp.spring.aop.annotation">context:component-scan>
<aop:aspectj-autoproxy>aop:aspectj-autoproxy>
beans> 2.3、编写切面类，定义各种通知
@Aspect //注解定义切面
@Component
public class LoggingAspect {
//前置通知
@Before("execution(public int com.hp.spring.aop.annatation.ArithmeticCalculator.*(int, int))")
public void beforeMethod(JoinPoint joinPoint){
String methodName = joinPoint.getSignature().getName();
Object [] args = joinPoint.getArgs();
System.out.println("The method " + methodName + " begins with " + Arrays.asList(args));
}
//前置通知
@After("execution(* com.hp.spring.aop.annatation.*.*(..))")
public void afterMethod(JoinPoint joinPoint){
String methodName = joinPoint.getSignature().getName();
System.out.println("The method " + methodName + " ends");
}
} 由于@before 和@after的表达式都一样，所以spring支持对表达式进行抽取成一个方法，抽取后的代码如下：
package com.hp.spring.aop.annotation;
import java.util.Arrays;
import org.aspectj.lang.JoinPoint;
import org.aspectj.lang.annotation.After;
import org.aspectj.lang.annotation.AfterReturning;
import org.aspectj.lang.annotation.AfterThrowing;
import org.aspectj.lang.annotation.Aspect;
import org.aspectj.lang.annotation.Before;
import org.aspectj.lang.annotation.Pointcut;
import org.springframework.core.annotation.Order;
import org.springframework.stereotype.Component;
/**
* 可以使用 @Order 注解指定切面的优先级, 值越小优先级越高
*/
@Order(2)
@Aspect
@Component
public class LoggingAspect {
/**
* 定义一个方法, 用于声明切入点表达式. 一般地, 该方法中再不需要添入其他的代码.
* 使用 @Pointcut 来声明切入点表达式.
* 后面的其他通知直接使用方法名来引用当前的切入点表达式.
*/
@Pointcut("execution(public int com.hp.spring.aop.annotation.ArithmeticCalculator.*(..))")
public void declareJointPointExpression(){}
/**
* 在 com.hp.spring.aop.annotation.ArithmeticCalculator 接口的每一个实现类的每一个方法开始之前执行一段代码
*/
@Before("declareJointPointExpression()")
public void beforeMethod(JoinPoint joinPoint){
String methodName = joinPoint.getSignature().getName();
Object [] args = joinPoint.getArgs();
System.out.println("The method " + methodName + " begins with " + Arrays.asList(args));
}
/**
* 在方法执行之后执行的代码. 无论该方法是否出现异常
*/
@After("declareJointPointExpression()")
public void afterMethod(JoinPoint joinPoint){
String methodName = joinPoint.getSignature().getName();
System.out.println("The method " + methodName + " ends");
}
/**
* 在方法法正常结束受执行的代码
* 返回通知是可以访问到方法的返回值的!
*/
@AfterReturning(value="declareJointPointExpression()",
returning="result")
public void afterReturning(JoinPoint joinPoint, Object result){
String methodName = joinPoint.getSignature().getName();
System.out.println("The method " + methodName + " ends with " + result);
}
/**
* 在目标方法出现异常时会执行的代码.
* 可以访问到异常对象; 且可以指定在出现特定异常时在执行通知代码
*/
@AfterThrowing(value="declareJointPointExpression()",
throwing="e")
public void afterThrowing(JoinPoint joinPoint, Exception e){
String methodName = joinPoint.getSignature().getName();
System.out.println("The method " + methodName + " occurs excetion:" + e);
}
/**
* 环绕通知需要携带 ProceedingJoinPoint 类型的参数.
* 环绕通知类似于动态代理的全过程: ProceedingJoinPoint 类型的参数可以决定是否执行目标方法.
* 且环绕通知必须有返回值, 返回值即为目标方法的返回值
*/
/*
@Around("execution(public int com.hp.spring.aop.annotation.ArithmeticCalculator.*(..))")
public Object aroundMethod(ProceedingJoinPoint pjd){
Object result = null;
String methodName = pjd.getSignature().getName();
try {
//前置通知
System.out.println("The method " + methodName + " begins with " + Arrays.asList(pjd.getArgs()));
//执行目标方法
result = pjd.proceed();
//返回通知
System.out.println("The method " + methodName + " ends with " + result);
} catch (Throwable e) {
//异常通知
System.out.println("The method " + methodName + " occurs exception:" + e);
throw new RuntimeException(e);
}
//后置通知
System.out.println("The method " + methodName + " ends");
return result;
}
*/
}- 切面二
package com.hp.spring.aop.annotation;
import java.util.Arrays;
import org.aspectj.lang.JoinPoint;
import org.aspectj.lang.annotation.Aspect;
import org.aspectj.lang.annotation.Before;
import org.springframework.core.annotation.Order;
import org.springframework.stereotype.Component;
@Order(1)
@Aspect
@Component
public class VlidationAspect {
@Before("com.hp.spring.aop.annotation.LoggingAspect.declareJointPointExpression()")
public void validateArgs(JoinPoint joinPoint){
System.out.println("-->validate:" + Arrays.asList(joinPoint.getArgs()));
}
}
- 测试类
package com.hp.spring.aop.annotation;
import org.springframework.context.ApplicationContext;
import org.springframework.context.support.ClassPathXmlApplicationContext;
public class Main {
public static void main(String[] args) {
ApplicationContext ctx = new ClassPathXmlApplicationContext("beans-aspectj.xml");
ArithmeticCalculator arithmeticCalculator = (ArithmeticCalculator) ctx.getBean("arithmeticCalculator");
System.out.println(arithmeticCalculator.getClass().getName());
int result = arithmeticCalculator.add(1, 2);
System.out.println("result:" + result);
result = arithmeticCalculator.div(1000, 10);
System.out.println("result:" + result);
}
} 打印出：
com.sun.proxy.$Proxy12
-->validate:[1, 2]
The method add begins with [1, 2]
The method add ends
The method add ends with 3
result:3
-->validate:[1000, 10]
The method div begins with [1000, 10]
The method div ends
The method div ends with 100
result:100
打印的日志中，可以看出，跟动态代理一样，可以定义各类通知。