Spring Boot RabbitMQ快速入门 (2)

Spring Boot RabbitMQ快速入门 (2)

Prefetch设置

当我们进入RabbitMQ的GUI管理界面, 点入某个队列查看消费者的属性时, 有记录如下

Channel	Consumer tag	Ack required	Exclusive	Prefetch count	Arguments
172.22.0.1:57382 (1)	amq.ctag-Gsix2DEjaFI9zVlsJJZp3Q	●	○	1
172.22.0.1:57378 (1)	amq.ctag-_FIcIOpflMXXaBQN7xLYcA	●	○	1

上面的表格说明消息的消费需要手工ack, 且是公平分发的. 设置prefetch的方式有两种

• 全局式设定

  在application.yml文件中设定spring.rabbitmq.listener.prefetch即可, 这会影响到本Spring Boot应用中所有使用默认SimpleRabbitListenerContainerFactory的消费者

  spring:
  rabbitmq:
    host: localhost
    username: chris
    password: 123123
    virtual-host: prontera
    listener:
      prefetch: 100

• 特定消费者设置

  在消费者的配置中自定义一个SimpleRabbitListenerContainerFactory

  @Bean
  public SimpleRabbitListenerContainerFactory myContainerFactory(
  SimpleRabbitListenerContainerFactoryConfigurer configurer, 
  ConnectionFactory connectionFactory) {
  SimpleRabbitListenerContainerFactory factory = new SimpleRabbitListenerContainerFactory();
  factory.setPrefetchCount(100);
  configurer.configure(factory, connectionFactory);
  return factory;
  }
  

  然后在消费者上声明使用该ContainerFactory即可达到对特定消费者配置prefetch的作用

  @RabbitListener(queues = "#{rabbitConfiguration.TOPIC_QUEUE}", containerFactory = "myContainerFactory")
  public void processBootTask2(WorkUnit content) {
  System.out.println(content);
  }
  

Ack机制

Spring Boot Rabbit使用手工应答机制, 当@RabbitListener修饰的方法被调用且没有抛出异常时, Spring Boot会为我们自动应答. 否则会根据设定的重试机制而作出nack或reject等行为.

重试机制

重试分两种, template的重试与listener的重试, 分别代表生产者与消费者

生产者端的重试

spring:
  rabbitmq:
    template:
      retry:
        enabled: true

通过以上配置可以启动AmqpTemplate的重试机制, 例如与RabbitMQ连接丢失的时候将会自动重试事件的发布, 这个特性默认是关闭的

消费者端的重试

消费者一端, 即@RabbitListener也有像AmqpTemplate一样的重试机制, 当重试次数(默认是3)耗尽的时候, 该特性同样也是默认关闭的, 可以通过以下配置打开

spring:
  rabbitmq:
    host: localhost
    username: chris
    password: 123123
    virtual-host: prontera
    listener:
      retry:
        enabled: true

如果消费一端的重试机制没有被启动, 而且Listener抛出异常的话, 那么该消息就会无限地被重试(刚开始我也晕, retry都关了居然会被无限地重试, 这个不是bug, 官方文档就是这么写的, 实测结果也是一样). 通常我们的做法是抛出AmqpRejectAndDontRequeueException以reject该消息, 同时如果有dead-letter queue被设置的话该消息就会被置入, 否则被丢弃.

如果启动消费端的重试机制, 我们可以设置其最大的尝试次数(默认为3次)

spring:
  rabbitmq:
    listener:
      retry:
        enabled: true
        max-attempts: 5

死信队列

@Bean
public DirectExchange directExchange() {
  return new DirectExchange(DEFAULT_DIRECT_EXCHANGE, true, true);
}

@Bean
public Queue tradeQueue() {
  final ImmutableMap args = 
    ImmutableMap.of("x-dead-letter-exchange", DEFAULT_DIRECT_EXCHANGE,
                    "x-dead-letter-routing-key", TRADE_DEAD_ROUTE_KEY);
  return new Queue(TRADE_QUEUE, true, false, true, args);
}

@Bean
public Binding tradeBinding() {
  return BindingBuilder.bind(tradeQueue()).to(directExchange()).with(TRADE_ROUTE_KEY);
}

@Bean
public Queue deadLetterQueue() {
  return new Queue(TRADE_DEAD_QUEUE, true, false, true);
}

@Bean
public Binding deadLetterBinding() {
  return BindingBuilder.bind(deadLetterQueue()).to(directExchange()).with(TRADE_DEAD_ROUTE_KEY);
}

队列定义不一致

对于已经存在的Queue配置将不会被后来的覆盖, 且会在Spring Boot控制台抛出一条WARN日志

Caused by: com.rabbitmq.client.ShutdownSignalException: channel error; protocol method: #method<channel.close>(reply-code=406, reply-text=PRECONDITION_FAILED - inequivalent arg 'durable' for queue 'boot_task' in vhost 'prontera': received 'false' but current is 'true', class-id=50, method-id=10)

Spring Boot RabbitMQ Properties

# RABBIT (RabbitProperties)
spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect.
spring.rabbitmq.cache.channel.checkout-timeout= # Number of milliseconds to wait to obtain a channel if the cache size has been reached.
spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache.
spring.rabbitmq.cache.connection.mode=CHANNEL # Connection factory cache mode.
spring.rabbitmq.cache.connection.size= # Number of connections to cache.
spring.rabbitmq.connection-timeout= # Connection timeout, in milliseconds; zero for infinite.
spring.rabbitmq.dynamic=true # Create an AmqpAdmin bean.
spring.rabbitmq.host=localhost # RabbitMQ host.
spring.rabbitmq.listener.acknowledge-mode= # Acknowledge mode of container.
spring.rabbitmq.listener.auto-startup=true # Start the container automatically on startup.
spring.rabbitmq.listener.concurrency= # Minimum number of consumers.
spring.rabbitmq.listener.default-requeue-rejected= # Whether or not to requeue delivery failures; default `true`.
spring.rabbitmq.listener.max-concurrency= # Maximum number of consumers.
spring.rabbitmq.listener.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).
spring.rabbitmq.listener.retry.enabled=false # Whether or not publishing retries are enabled.
spring.rabbitmq.listener.retry.initial-interval=1000 # Interval between the first and second attempt to deliver a message.
spring.rabbitmq.listener.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
spring.rabbitmq.listener.retry.max-interval=10000 # Maximum interval between attempts.
spring.rabbitmq.listener.retry.multiplier=1.0 # A multiplier to apply to the previous delivery retry interval.
spring.rabbitmq.listener.retry.stateless=true # Whether or not retry is stateless or stateful.
spring.rabbitmq.listener.transaction-size= # Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count.
spring.rabbitmq.password= # Login to authenticate against the broker.
spring.rabbitmq.port=5672 # RabbitMQ port.
spring.rabbitmq.publisher-confirms=false # Enable publisher confirms.
spring.rabbitmq.publisher-returns=false # Enable publisher returns.
spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout, in seconds; zero for none.
spring.rabbitmq.ssl.enabled=false # Enable SSL support.
spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate.
spring.rabbitmq.ssl.key-store-password= # Password used to access the key store.
spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates.
spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store.
spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default configure by the rabbit client library.
spring.rabbitmq.template.mandatory=false # Enable mandatory messages.
spring.rabbitmq.template.receive-timeout=0 # Timeout for `receive()` methods.
spring.rabbitmq.template.reply-timeout=5000 # Timeout for `sendAndReceive()` methods.
spring.rabbitmq.template.retry.enabled=false # Set to true to enable retries in the `RabbitTemplate`.
spring.rabbitmq.template.retry.initial-interval=1000 # Interval between the first and second attempt to publish a message.
spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to publish a message.
spring.rabbitmq.template.retry.max-interval=10000 # Maximum number of attempts to publish a message.
spring.rabbitmq.template.retry.multiplier=1.0 # A multiplier to apply to the previous publishing retry interval.
spring.rabbitmq.username= # Login user to authenticate to the broker.
spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker.