nginx高并发优化——轻松应对1万并发

PHP交流群:294088839,

测试机器512M内存,swap分区407M ,centos6.5,nginx1.10.1,php5.6
默认的Linux内核参数和nginx参数考虑的是最通用场景,不适合高并发
所以优化思路主要包括两个层面:系统层面+nginx层面


一、系统层面
1、调整同时打开文件数量
ulimit -n 20480
2、TCP最大连接数(somaxconn)
echo 10000 > /proc/sys/net/core/somaxconn
3、TCP连接立即回收、回用(recycle、reuse)
echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse
echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle
4、不做TCP洪水抵御
echo 0 > /proc/sys/net/ipv4/tcp_syncookies
也可以直接使用优化后的配置,在/etc/sysctl.conf中加入:
net.core.somaxconn = 20480
net.core.rmem_default = 262144
net.core.wmem_default = 262144
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 4096 16777216
net.ipv4.tcp_wmem = 4096 4096 16777216
net.ipv4.tcp_mem = 786432 2097152 3145728
net.ipv4.tcp_max_syn_backlog = 16384
net.core.netdev_max_backlog = 20000
net.ipv4.tcp_fin_timeout = 15
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_orphans = 131072
net.ipv4.tcp_syncookies = 0
使用:sysctl -p 生效
sysctl -p


二、nginx层面
修改nginx配置文件,nginx.conf
增加work_rlimit_nofile和worker_connections数量,并禁用keepalive_timeout。
worker_processes  1; #nginx 进程数,建议按照cpu 数目来指定,一般为它的倍数
worker_rlimit_nofile 20000; #一个nginx 进程打开的最多文件描述符数目,理论值应该是最多打开文件数(ulimit -n)与nginx 进程数相除,但是nginx 分配请求并不是那么均匀,所以最好与ulimit -n 的值保持一致
events {
use epoll;#使用epoll的I/O模型
worker_connections 20000;#每个进程允许的最多连接数, 理论上每台nginx 服务器的最大连接数为worker_processes*worker_connections
multi_accept on;
}
http {
keepalive_timeout 0;
}


三、测试
重启nginx
service nginx restart


使用ab压力测试
D:\phpStudy\Apache\bin>ab -r -n 150000  -c 10000 http://192.168.1.198/msg.php
This is ApacheBench, Version 2.3 <$Revision: 1706008 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/
 
Benchmarking 192.168.1.198 (be patient)
Completed 15000 requests
Completed 30000 requests
Completed 45000 requests
Completed 60000 requests
Completed 75000 requests
Completed 90000 requests
Completed 105000 requests
Completed 120000 requests
Completed 135000 requests
Completed 150000 requests
Finished 150000 requests
 
 
Server Software:        nginx/1.10.1
Server Hostname:        192.168.1.198
Server Port:            80
 
Document Path:          /msg.php
Document Length:        955 bytes
 
Concurrency Level:      10000
Time taken for tests:   553.886 seconds
Complete requests:      150000
Failed requests:        74065
   (Connect: 0, Receive: 0, Length: 74065, Exceptions: 0)
Non-2xx responses:      74065
Total transferred:      108769526 bytes
HTML transferred:       85048014 bytes
Requests per second:    270.81 [#/sec] (mean)
Time per request:       36925.756 [ms] (mean)
Time per request:       3.693 [ms] (mean, across all concurrent requests)
Transfer rate:          191.77 [Kbytes/sec] received
 
Connection Times (ms)
              min  mean[+/-sd] median   max
Connect:        0    1  19.0      1    3004
Processing:   332 33370 25597.6  31689   92093
Waiting:      163 32879 25640.0  31420   91598
Total:        332 33370 25597.5  31689   92093
 
Percentage of the requests served within a certain time (ms)
  50%  31689
  66%  60464
  75%  60730
  80%  60928
  90%  61319
  95%  61790
  98%  62191
  99%  62640
 100%  92093 (longest request)
 
D:\phpStudy\Apache\bin>

如果不优化,运行时间超过半个小时!!!
ab -r -n 150000  -c 10000 http://192.168.1.198/msg.php
This is ApacheBench, Version 2.3 <$Revision: 1706008 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/
 
Benchmarking 192.168.1.198 (be patient)
Completed 15000 requests
Completed 30000 requests
Completed 45000 requests
Completed 60000 requests
Completed 75000 requests
Completed 90000 requests
Completed 105000 requests
Completed 120000 requests
Completed 135000 requests
Completed 150000 requests
Finished 150000 requests
 
 
Server Software:        nginx/1.10.1
Server Hostname:        192.168.1.198
Server Port:            80
 
Document Path:          /msg.php
Document Length:        955 bytes
 
Concurrency Level:      10000
Time taken for tests:   3136.477 seconds
Complete requests:      150000
Failed requests:        0
Total transferred:      168150000 bytes
HTML transferred:       143250000 bytes
Requests per second:    47.82 [#/sec] (mean)
Time per request:       209098.485 [ms] (mean)
Time per request:       20.910 [ms] (mean, across all concurrent requests)
Transfer rate:          52.35 [Kbytes/sec] received
 
Connection Times (ms)
              min  mean[+/-sd] median   max
Connect:        0   20 236.9      1    3045
Processing:  4178 202109 29524.0 208780  220830
Waiting:     1246 105285 59956.2 104752  216204
Total:       4179 202129 29523.9 208806  220831
 
Percentage of the requests served within a certain time (ms)
  50%  208806
  66%  210991
  75%  211892
  80%  212733
  90%  213611
  95%  214917
  98%  217376
  99%  217451
 100%  220831 (longest request)

--------------------- 
作者:爱代码也爱生活 
来源:CSDN 
原文:https://blog.csdn.net/nuli888/article/details/51865267 
版权声明:本文为博主原创文章,转载请附上博文链接!

你可能感兴趣的:(学习总结)