更新-LabVIEW固高函数库源码文档调试软件-2019年4月14日

 

函数名：dir.mnu
     dir.mnu
    GT 2D Compare Clear Data.vi
    GT 2D Compare Clear.vi
    GT 2D Compare Data.vi
    GT 2D Compare Mode.vi
    GT 2D Compare Pulse.vi
    GT 2D Compare Set Pre Out Time.vi
    GT 2D Compare Set Prm.vi
    GT 2D Compare Start.vi
    GT 2D Compare Status.vi
    GT 2D Compare Stop.vi
    GT Alarm Off.vi
    GT Alarm On.vi
    GT Arc XYC Override2.vi
    GT Arc XYC Override2WN.vi
    GT Arc XYC.vi
    GT Arc XYCWN.vi
    GT Arc XYR Override2.vi
    GT Arc XYR Override2WN.vi
    GT Arc XYR.vi
    GT Arc XYRWN.vi
    GT Arc XYZ.vi
    GT Arc XYZWN.vi
    GT Arc YZC Override2.vi
    GT Arc YZC Override2WN.vi
    GT Arc YZC.vi
    GT Arc YZCWN.vi
    GT Arc YZR Override2.vi
    GT Arc YZR Override2WN.vi
    GT Arc YZR.vi
    GT Arc YZRWN.vi
    GT Arc ZXC Override2.vi
    GT Arc ZXC Override2WN.vi
    GT Arc ZXC.vi
    GT Arc ZXCWN.vi
    GT Arc ZXR Override2.vi
    GT Arc ZXR Override2WN.vi
    GT Arc ZXR.vi
    GT Arc ZXRWN.vi
    GT Auto Focus.vi
    GT Axis Off.vi
    GT Axis On.vi
    GT Bind.vi
    GT Buf Compare Pulse.vi
    GT Buf DA.vi
    GT Buf Delay.vi
    GT Buf Disable Do Bit Pulse.vi
    GT Buf Enable Do Bit Pulse.vi
    GT Buf Follow Event Cross.vi
    GT Buf Follow Event Trigger.vi
    GT Buf Follow Master.vi
    GT Buf Follow Next.vi
    GT Buf Follow Return.vi
    GT Buf Follow Start.vi
    GT Buf Gear Percent.vi
    GT Buf Gear.vi
    GT Buf IO.vi
    GT Buf Jump Next Seg.vi
    GT Buf Laser Follow Mode.vi
    GT Buf Laser Follow Off.vi
    GT Buf Laser Follow Ratio.vi
    GT Buf Laser Follow Spline.vi
    GT Buf Laser Off.vi
    GT Buf Laser On.vi
    GT Buf Laser Prf Cmd.vi
    GT Buf Lmts Off.vi
    GT Buf Lmts On.vi
    GT Buf Move.vi
    GT Buf Set Double Var.vi
    GT Buf Set Long Var.vi
    GT Buf Set Stop Io.vi
    GT Buf Set Var Value.vi
    GT Buf Smart Cutter Off.vi
    GT Buf Smart Cutter On.vi
    GT Buf Stop Motion.vi
    GT Buf Synch Prf Pos.vi
    GT Buf Virtual To Actual.vi
    GT Clear Capture Status.vi
    GT Clear Trigger Status.vi
    GT Close Ext Mdl.vi
    GT Close.vi
    GT Clr Sts.vi
    GT Combine Axes Off.vi
    GT Combine Axes On.vi
    GT Compare Continue Pulse Mode.vi
    GT Compare Data.vi
    GT Compare Linear.vi
    GT Compare Pulse.vi
    GT Compare Status.vi
    GT Compare Stop.vi
    GT Compile.vi
    GT Config Auto Focus.vi
    GT Crd Clear.vi
    GT Crd Data Circle.vi
    GT Crd Data.vi
    GT Crd Space.vi
    GT Crd Start Step.vi
    GT Crd Start.vi
    GT Crd Status.vi
    GT Crd Step Mode.vi
    GT Ctrl Mode.vi
    GT Delay High Precision.vi
    GT Delay.vi
    GT Dis FPK.vi
    GT Disable Do Bit Pulse.vi
    GT Disable Enc Response Check.vi
    GT Disable Gantry.vi
    GT Download Config.vi
    GT Download.vi
    GT Ena FPK.vi
    GT Enable Do Bit Pulse.vi
    GT Enable Enc Response Check.vi
    GT Enable Gantry.vi
    GT Enable Lead Screw Comp.vi
    GT Enable Lead Screw Cross Comp.vi
    GT Enc Off.vi
    GT Enc On.vi
    GT Enc Scale.vi
    GT Enc Sns.vi
    GT End Handwheel.vi
    GT Follow Clear.vi
    GT Follow Data.vi
    GT Follow Space.vi
    GT Follow Start.vi
    GT Follow Switch.vi
    GT Gantry Axis Off.vi
    GT Gantry Axis On.vi
    GT Gear Start.vi
    GT Get Adc Config.vi
    GT Get Adc Filter Prm.vi
    GT Get Adc Value.vi
    GT Get Adc.vi
    GT Get Auto Focus Status.vi
    GT Get Axis Addition.vi
    GT Get Axis Band.vi
    GT Get Axis Enc Acc.vi
    GT Get Axis Enc Pos.vi
    GT Get Axis Enc Vel.vi
    GT Get Axis Error.vi
    GT Get Axis On Delay Time.vi
    GT Get Axis Prf Acc.vi
    GT Get Axis Prf Pos.vi
    GT Get Axis Prf Vel.vi
    GT Get Backlash.vi
    GT Get Capture Home Gpi.vi
    GT Get Capture Mode.vi
    GT Get Capture Repeat Pos.vi
    GT Get Capture Repeat Status.vi
    GT Get Capture Status.vi
    GT Get Capture Width.vi
    GT Get Card No.vi
    GT Get Clock High Precision.vi
    GT Get Clock.vi
    GT Get Combine Axes Status.vi
    GT Get Combine Axes.vi
    GT Get Compensate.vi
    GT Get Compensate2D Table.vi
    GT Get Compensate2D Value.vi
    GT Get Compensate2D.vi
    GT Get Control Config Ex.vi
    GT Get Control Filter.vi
    GT Get Control Superimposed.vi
    GT Get Crd Buffer Mode.vi
    GT Get Crd Follow Loop.vi
    GT Get Crd Follow Prm.vi
    GT Get Crd Follow Status.vi
    GT Get Crd Jerk.vi
    GT Get Crd Lmt Stop Mode.vi
    GT Get Crd Map Base.vi
    GT Get Crd Pos.vi
    GT Get Crd Prm.vi
    GT Get Crd Segment Time.vi
    GT Get Crd Single Max Vel.vi
    GT Get Crd Smooth.vi
    GT Get Crd Stop Dec.vi
    GT Get Crd Time.vi
    GT Get Crd Vel.vi
    GT Get Dac.vi
    GT Get Di Raw.vi
    GT Get Di Reverse Count.vi
    GT Get Di.vi
    GT Get Dll Version.vi
    GT Get Do.vi
    GT Get Double Var.vi
    GT Get Enc Pos Pre.vi
    GT Get Enc Pos.vi
    GT Get Enc Response Check.vi
    GT Get Enc Vel.vi
    GT Get Encoder Scale.vi
    GT Get Ext Ad Current.vi
    GT Get Ext Ad Value.vi
    GT Get Ext Ad Voltage.vi
    GT Get Ext Do Value.vi
    GT Get Ext Io Bit.vi
    GT Get Ext Io Value.vi
    GT Get Ext Mdl Mode.vi
    GT Get Follow Event.vi
    GT Get Follow Loop.vi
    GT Get Follow Master.vi
    GT Get Follow Memory.vi
    GT Get Follow Phasing.vi
    GT Get Follow Status.vi
    GT Get Fun Id.vi
    GT Get Gantry Err Lmt.vi
    GT Get Gantry Mode.vi
    GT Get Gantry Pid.vi
    GT Get Gear Event.vi
    GT Get Gear Master.vi
    GT Get Gear Ratio.vi
    GT Get Home Prm.vi
    GT Get Home Status.vi
    GT Get HSIO Opt.vi
    GT Get Interface Board Sts.vi
    GT Get Interrupt Mask.vi
    GT Get Jog Prm.vi
    GT Get Kvff Filter.vi
    GT Get Laser Crd Map.vi
    GT Get Laser Follow Spline.vi
    GT Get Laser On Time.vi
    GT Get Lead Screw Comp Inner Value.vi
    GT Get Lead Screw Link.vi
    GT Get Long Var.vi
    GT Get Look Ahead Seg Count.vi
    GT Get Look Ahead Space.vi
    GT Get Motion Smooth.vi
    GT Get Move Absolute Ex.vi
    GT Get Move Absolute.vi
    GT Get Move Velocity.vi
    GT Get Mtr Bias.vi
    GT Get Mtr Lmt.vi
    GT Get Pid.vi
    GT Get Pos Err.vi
    GT Get Pos.vi
    GT Get Prf Acc.vi
    GT Get Prf Mode.vi
    GT Get Prf Pos.vi
    GT Get Prf Vel.vi
    GT Get Profile Scale.vi
    GT Get Pt Link.vi
    GT Get Pt Loop.vi
    GT Get Pt Memory.vi
    GT Get Pt Precision Mode.vi
    GT Get Pvt Loop.vi
    GT Get Rand Code.vi
    GT Get Remainder Seg Num.vi
    GT Get Seg Target Pos.vi
    GT Get Smart Cutter Info.vi
    GT Get Smart Cutter Prm.vi
    GT Get Soft Limit.vi
    GT Get Stop Dec.vi
    GT Get Sts Ext Mdl.vi
    GT Get Sts.vi
    GT Get Thread Sts.vi
    GT Get Transform Orthogonal Position.vi
    GT Get Transform Orthogonal.vi
    GT Get Transform Perpendicularity Position.vi
    GT Get Transform Perpendicularity.vi
    GT Get Trap Prm.vi
    GT Get Trigger Status.vi
    GT Get Trigger.vi
    GT Get User Seg Num WN.vi
    GT Get User Seg Num.vi
    GT Get User Target Vel.vi
    GT Get Uuid.vi
    GT Get Var Id.vi
    GT Get Var Value.vi
    GT Get Vel.vi
    GT Get Version.vi
    GT Go Home.vi
    GT Gpi Sns.vi
    GT Handwheel Init.vi
    GT Helix XYCZ Override2.vi
    GT Helix XYCZ Override2WN.vi
    GT Helix XYCZ.vi
    GT Helix XYCZWN.vi
    GT Helix XYRZ Override2.vi
    GT Helix XYRZ Override2WN.vi
    GT Helix XYRZ.vi
    GT Helix XYRZWN.vi
    GT Helix YZCX Override2.vi
    GT Helix YZCX Override2WN.vi
    GT Helix YZCX.vi
    GT Helix YZCXWN.vi
    GT Helix YZRX Override2.vi
    GT Helix YZRX Override2WN.vi
    GT Helix YZRX.vi
    GT Helix YZRXWN.vi
    GT Helix ZXCY Override2.vi
    GT Helix ZXCY Override2WN.vi
    GT Helix ZXCY.vi
    GT Helix ZXCYWN.vi
    GT Helix ZXRY Override2.vi
    GT Helix ZXRY Override2WN.vi
    GT Helix ZXRY.vi
    GT Helix ZXRYWN.vi
    GT Home Init.vi
    GT Home Stop.vi
    GT Home Sts.vi
    GT Home.vi
    GT Index.vi
    GT Init Look Ahead.vi
    GT Interrupt Off.vi
    GT Interrupt On.vi
    GT Interrupt Trigger.vi
    GT Laser Out Frq.vi
    GT Laser Power Mode.vi
    GT Laser Prf Cmd.vi
    GT Laser Pwm Dac Off.vi
    GT Laser Pwm Dac On.vi
    GT Lmt Sns.vi
    GT Lmts Off.vi
    GT Lmts On.vi
    GT Ln XY Override2.vi
    GT Ln XY Override2WN.vi
    GT Ln XY.vi
    GT Ln XYG0.vi
    GT Ln XYG0Override2.vi
    GT Ln XYG0Override2WN.vi
    GT Ln XYG0WN.vi
    GT Ln XYWN.vi
    GT Ln XYZ Override2.vi
    GT Ln XYZ Override2WN.vi
    GT Ln XYZ.vi
    GT Ln XYZA Override2.vi
    GT Ln XYZA Override2WN.vi
    GT Ln XYZA.vi
    GT Ln XYZACUVW Override2.vi
    GT Ln XYZACUVW Override2WN.vi
    GT Ln XYZACUVW.vi
    GT Ln XYZACUVWWN.vi
    GT Ln XYZAG0.vi
    GT Ln XYZAG0Override2.vi
    GT Ln XYZAG0Override2WN.vi
    GT Ln XYZAG0WN.vi
    GT Ln XYZAWN.vi
    GT Ln XYZG0.vi
    GT Ln XYZG0Override2.vi
    GT Ln XYZG0Override2WN.vi
    GT Ln XYZG0WN.vi
    GT Ln XYZWN.vi
    GT Load Config.vi
    GT Load Ext Config.vi
    GT Move Absolute Ex.vi
    GT Move Absolute.vi
    GT Move Velocity.vi
    GT Multi Axis Off.vi
    GT Multi Axis On.vi
    GT Open Ext Mdl.vi
    GT Open.vi
    GT Pause Thread.vi
    GT Prf Follow.vi
    GT Prf Gear.vi
    GT Prf Jog.vi
    GT Prf Pt.vi
    GT Prf Pvt.vi
    GT Prf Trap.vi
    GT Profile Scale.vi
    GT Pt Ao.vi
    GT Pt Clear.vi
    GT Pt Data WN.vi
    GT Pt Data.vi
    GT Pt Do Bit.vi
    GT Pt Get Seg Num.vi
    GT Pt Space.vi
    GT Pt Start.vi
    GT Pvt Continuous Calculate.vi
    GT Pvt Percent Calculate.vi
    GT Pvt Start.vi
    GT Pvt Status.vi
    GT Pvt Table Complete.vi
    GT Pvt Table Continuous.vi
    GT Pvt Table Ex.vi
    GT Pvt Table Move Percent.vi
    GT Pvt Table Percent.vi
    GT Pvt Table Select.vi
    GT Pvt Table.vi
    GT Reset Ext Mdl.vi
    GT Reset.vi
    GT Run Thread.vi
    GT Set Adc Config.vi
    GT Set Adc Filter Prm.vi
    GT Set Adc Filter.vi
    GT Set Arc Allow Error.vi
    GT Set Auto Focus Aux Prm.vi
    GT Set Auto Focus Ref Vol.vi
    GT Set Axis Addition.vi
    GT Set Axis Band.vi
    GT Set Axis Input Shaping.vi
    GT Set Axis On Delay Time.vi
    GT Set Backlash.vi
    GT Set Capture Encoder.vi
    GT Set Capture Mode.vi
    GT Set Capture Repeat.vi
    GT Set Capture Sense.vi
    GT Set Card No.vi
    GT Set Combine Axes.vi
    GT Set Compare Port.vi
    GT Set Compensate2D Table.vi
    GT Set Compensate2D.vi
    GT Set Control Config Ex.vi
    GT Set Control Filter.vi
    GT Set Control Superimposed.vi
    GT Set Crd Buffer Mode.vi
    GT Set Crd Follow Loop.vi
    GT Set Crd Follow Prm.vi
    GT Set Crd Jerk.vi
    GT Set Crd Lmt Stop Mode.vi
    GT Set Crd Map Base.vi
    GT Set Crd Prm.vi
    GT Set Crd Single Max Vel.vi
    GT Set Crd Smooth.vi
    GT Set Crd Stop Dec.vi
    GT Set Dac.vi
    GT Set Di Reverse Count.vi
    GT Set Do Bit Reverse.vi
    GT Set Do Bit.vi
    GT Set Do Mask.vi
    GT Set Do.vi
    GT Set Double Var.vi
    GT Set Enc Pos.vi
    GT Set Enc Response Check.vi
    GT Set Encoder Scale.vi
    GT Set Ext Da Value.vi
    GT Set Ext Da Voltage.vi
    GT Set Ext Io Bit.vi
    GT Set Ext Io Value.vi
    GT Set Ext Mdl Mode.vi
    GT Set Follow Event.vi
    GT Set Follow Loop.vi
    GT Set Follow Master.vi
    GT Set Follow Memory.vi
    GT Set Follow Phasing.vi
    GT Set Gantry Err Lmt.vi
    GT Set Gantry Mode.vi
    GT Set Gantry Pid.vi
    GT Set Gear Event.vi
    GT Set Gear Master.vi
    GT Set Gear Ratio.vi
    GT Set Handwheel Stop Dec.vi
    GT Set HSIO Opt.vi
    GT Set Interface Board Sts.vi
    GT Set Interrupt Mask.vi
    GT Set Jog Prm.vi
    GT Set Kvff Filter.vi
    GT Set Laser Crd Map.vi
    GT Set Laser Dis Mode.vi
    GT Set Laser Dis Ratio.vi
    GT Set Laser Dis Table1D.vi
    GT Set Laser Dis Table2D Ex.vi
    GT Set Laser Dis Table2D.vi
    GT Set Laser Follow Spline.vi
    GT Set Laser Mode.vi
    GT Set Laser Pwm Dac.vi
    GT Set Lead Screw Comp.vi
    GT Set Lead Screw Cross Comp.vi
    GT Set Lead Screw Link.vi
    GT Set Level Delay.vi
    GT Set Long Var.vi
    GT Set Max Override LA.vi
    GT Set Motion Smooth.vi
    GT Set Mtr Bias.vi
    GT Set Mtr Lmt.vi
    GT Set Override.vi
    GT Set Override2.vi
    GT Set Pid.vi
    GT Set Pos Err.vi
    GT Set Pos.vi
    GT Set Pre Vltg.vi
    GT Set Prf Pos.vi
    GT Set Profile Scale.vi
    GT Set Pt Link.vi
    GT Set Pt Loop.vi
    GT Set Pt Memory.vi
    GT Set Pt Precision Mode.vi
    GT Set Pt Vel.vi
    GT Set Pulse Width.vi
    GT Set Pvt Loop.vi
    GT Set Rand Code.vi
    GT Set Smart Cutter Prm.vi
    GT Set Smart Cutter Value.vi
    GT Set Soft Limit.vi
    GT Set Stop Dec.vi
    GT Set Stop Io.vi
    GT Set Transform Orthogonal.vi
    GT Set Transform Perpendicularity.vi
    GT Set Trap Prm.vi
    GT Set Trigger.vi
    GT Set User Seg Num.vi
    GT Set Var Value.vi
    GT Set Vel.vi
    GT Set Wait Pulse Ex.vi
    GT Set Wait Pulse.vi
    GT Smart Cutter Off.vi
    GT Smart Cutter On.vi
    GT Smart Cutter Start.vi
    GT Start Handwheel.vi
    GT Step Dir.vi
    GT Step Pulse.vi
    GT Stop Capture.vi
    GT Stop Thread.vi
    GT Stop.vi
    GT Switchto Card No Ext Mdl.vi
    GT Synch Axis Pos.vi
    GT Update.vi
    GT Upload Config.vi
    GT Zero Gantry Pos.vi
    GT Zero Laser On Time.vi
    GT Zero Pos.vi

DLL  -- 动态链接库包括---- C#;Delphi;VB.NET;VB6.0;VC   这是我生成的其他的是百度和固高提供的。
example  --  固高官方例程 。
gts  --  固高LabVIEW GTS-VB系列多轴运动控制器 --2019年4月6日生成
mct2008  --  固高mode调试软件
MCB_SOR_1.0  --  固高源码 GTS400 注意是4轴的 （8轴的用户要修改的！！）

注：本人花了大量时间研究和制作只供参考  出现任何问题与作者无关
这个lab库加入了 Error Converter (ErrCode or Status).vi 主要处理vi错误和函数返回错误代码 

作者：三多
博客地址：https://blog.csdn.net/ChinaSanDuo
QQ:1064331064 （请注明意图 谢谢！）