supervisord 的 XML-RPC API 使用说明

supervisord 的安装

使用 easy_install 安装 supervisord

sudo easy_install  supervisord

supervisord 的配置

生成配置文件

sudo sh -c '/usr/local/bin/echo_supervisord_conf  > /etc/supervisord.conf'

supervisord 的配置文件如下

; Sample supervisor config file.
;
; For more information on the config file, please see:
; http://supervisord.org/configuration.html
;
; Note: shell expansion ("~" or "$HOME") is not supported.  Environment
; variables can be expanded using this syntax: "%(ENV_HOME)s".

[unix_http_server]
file=/tmp/supervisor.sock   ; (the path to the socket file)
;chmod=0700                 ; socket file mode (default 0700)
;chown=nobody:nogroup       ; socket file uid:gid owner
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

[inet_http_server]         ; inet (TCP) server disabled by default
port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
username=ops              ; (default is no username (open server))
password=vipshop               ; (default is no password (open server))

[supervisord]
logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB        ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10           ; (num of main logfile rotation backups;default 10)
loglevel=info                ; (log level;default info; others: debug,warn,trace)
pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false               ; (start in foreground if true;default false)
minfds=1024                  ; (min. avail startup file descriptors;default 1024)
minprocs=200                 ; (min. avail process descriptors;default 200)
;umask=022                   ; (process file creation umask;default 022)
;user=chrism                 ; (default is current user, required if root)
;identifier=supervisor       ; (supervisord identifier, default is 'supervisor')
;directory=/tmp              ; (default is not to cd during start)
;nocleanup=true              ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
;environment=KEY="value"     ; (key value pairs to add to environment)
;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history  ; use readline history if available

; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.

[program:ds.tools.vip.com]
command=sh /apps/dat/web/newcode/debug_ds/run.sh ; the program (relative uses PATH, can take args)
process_name=%(program_name)s ; process_name expr (default %(program_name)s)
numprocs=1                    ; number of processes copies to start (def 1)
directory=/apps/dat/web/newcode/debug_ds/ ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=999                  ; the relative start priority (default 999)
autostart=true                ; start at supervisord start (default: true)
autorestart=true        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT               ; signal used to kill process (default TERM)
stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions (def no adds)
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.

;[eventlistener:theeventlistenername]
;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;events=EVENT                  ; event notif. types to subscribe to (req'd)
;buffer_size=10                ; event buffer queue size (default 10)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=-1                   ; the relative start priority (default -1)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=unexpected        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups        ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.

;[group:thegroupname]
;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions
;priority=999                  ; the relative start priority (default 999)

; The [include] section can just contain the "files" setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.

;[include]
;files = relative/directory/*.ini

启动 supervisord

启动 supervisord 的命令如下：

supervisord

使用 supervisorctl 查看 supervisord 相关信息

$ supervisorctl
ds.tools.vip.com                 RUNNING    pid 13794, uptime 0:17:25
supervisor>

查看 supervisor 的所有命令可以使用 help 帮助命令

 ~]$ supervisorctl
ds.tools.vip.com                 RUNNING    pid 13794, uptime 0:17:25
supervisor> help

default commands (type help ):
=====================================
add    clear  fg        open  quit    remove  restart   start   stop  update 
avail  exit   maintail  pid   reload  reread  shutdown  status  tail  version

查看某个命令的具体用法为 help commandname

supervisor> help start
start             Start a process
start :*         Start all processes in a group
start       Start multiple processes or groups
start all               Start all processes
supervisor>

XML-RPC API 的使用

通过配置文件所知，我们的配置的 url 如下：

[inet_http_server]         ; inet (TCP) server disabled by default
port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
username=ops              ; (default is no username (open server))
password=vipshop               ; (default is no password (open server))

连接 supervisord 的代码示例如下：

import xmlrpclib
server = xmlrpclib.Server('http://ops:[email protected]:9001/RPC2')

当我们不知道 supervisord 有哪些方法的时候，可以使用如下接口查询出 API 支持的方法

methods = server.system.listMethods()
print methods

输出如下：

>>> print methods
['supervisor.addProcessGroup', 'supervisor.clearAllProcessLogs', 'supervisor.clearLog', 'supervisor.clearProcessLog', 'supervisor.clearProcessLogs', 'supervisor.getAPIVersion', 'supervisor.getAllConfigInfo', 'supervisor.getAllProcessInfo', 'supervisor.getIdentification', 'supervisor.getPID', 'supervisor.getProcessInfo', 'supervisor.getState', 'supervisor.getSupervisorVersion', 'supervisor.getVersion', 'supervisor.readLog', 'supervisor.readMainLog', 'supervisor.readProcessLog', 'supervisor.readProcessStderrLog', 'supervisor.readProcessStdoutLog', 'supervisor.reloadConfig', 'supervisor.removeProcessGroup', 'supervisor.restart', 'supervisor.sendProcessStdin', 'supervisor.sendRemoteCommEvent', 'supervisor.shutdown', 'supervisor.startAllProcesses', 'supervisor.startProcess', 'supervisor.startProcessGroup', 'supervisor.stopAllProcesses', 'supervisor.stopProcess', 'supervisor.stopProcessGroup', 'supervisor.tailProcessLog', 'supervisor.tailProcessStderrLog', 'supervisor.tailProcessStdoutLog', 'system.listMethods', 'system.methodHelp', 'system.methodSignature', 'system.multicall']

注：官方的文档的 XML-RPC API

查看某个进程的详细信息

proInfo = server.supervisor.getProcessInfo('ds.tools.vip.com')
print proInfo