Mockit:测试框架基础使用

  • 什么是mock?
    在软件开发的世界之外, "mock"一词是指模仿或者效仿。 因此可以将“mock”理解为一个替身,替代者. 在软件开发中提及"mock",通常理解为模拟对象或者Fake。
  • 为什么需要Mock?
    Mock是为了解决units之间由于耦合而难于被测试的问题。所以mock object是unit test的一部分。
  • Mock的好处是什么?

    • 提前创建测试,TDD(测试驱动开发)
      如果你创建了一个Mock那么你就可以在service接口创建之前写Service Tests了,这样你就能在开发过程中把测试添加到你的自动化测试环境中了。换句话说,模拟使你能够使用测试驱动开发。
    • 团队可以并行工作
      这类似于上面的那点;为不存在的代码创建测试。但前面讲的是开发人员编写测试程序,这里说的是测试团队来创建。当还没有任何东西要测的时候测试团队如何来创建测试呢?模拟并针对模拟测试!这意味着当service借口需要测试时,实际上QA团队已经有了一套完整的测试组件;没有出现一个团队等待另一个团队完成的情况。这使得模拟的效益型尤为突出了。
    • 你可以创建一个验证或者演示程序。
      由于Mocks非常高效,Mocks可以用来创建一个概念证明,作为一个示意图,或者作为一个你正考虑构建项目的演示程序。这为你决定项目接下来是否要进行提供了有力的基础,但最重要的还是提供了实际的设计决策。
    • 隔离系统
      有时,你希望在没有系统其他部分的影响下测试系统单独的一部分。由于其他系统部分会给测试数据造成干扰,影响根据数据收集得到的测试结论。使用mock你可以移除掉除了需要测试部分的系统依赖的模拟。当隔离这些mocks后,mocks就变得非常简单可靠,快速可预见。这为你提供了一个移除了随机行为,有重复模式并且可以监控特殊系统的测试环境。

Mockito使用示例

  • 模拟对象
// 模拟LinkedList 的一个对象  
LinkedList mockedList = mock(LinkedList.class);
// 此时调用get方法,会返回null,因为还没有对方法调用的返回值做模拟
System.out.println(mockedList.get(0));
  • 模拟方法调用的返回值
// 模拟获取第一个元素时,返回字符串first。  给特定的方法调用返回固定值在官方说法中称为stub。
when(mockedList.get(0)).thenReturn("first");
// 此时打印输出first
System.out.println(mockedList.get(0));
  • 模拟方法调用抛出异常
// 模拟获取第二个元素时,抛出RuntimeException  
when(mockedList.get(1)).thenThrow(new RuntimeException());
// 此时将会抛出RuntimeException  
System.out.println(mockedList.get(1));
如果一个函数没有返回值类型,那么可以使用此方法模拟异常抛出

doThrow(new RuntimeException("clear exception")).when(mockedList).clear();
mockedList.clear();
  • 模拟调用方法时的参数匹配
// anyInt()匹配任何int参数,这意味着参数为任意值,其返回值均是element  
when(mockedList.get(anyInt())).thenReturn("element");
// 此时打印是element
System.out.println(mockedList.get(999));
  • 模拟方法调用次数
// 调用add一次
mockedList.add("once"); 
// 下面两个写法验证效果一样,均验证add方法是否被调用了一次
verify(mockedList).add("once");
verify(mockedList, times(1)).add("once");
  • 校验行为
// mock creation
 List mockedList = mock(List.class);
 // using mock object
 mockedList.add("one");
 mockedList.clear();
 //verification
 verify(mockedList).add("one");
 verify(mockedList).clear();
  • 模拟方法调用(Stubbing)
 //You can mock concrete classes, not just interfaces
 LinkedList mockedList = mock(LinkedList.class);
 //stubbing
 when(mockedList.get(0)).thenReturn("first");
 when(mockedList.get(1)).thenThrow(new RuntimeException());
 //following prints "first"
 System.out.println(mockedList.get(0));
 //following throws runtime exception
 System.out.println(mockedList.get(1));
 //following prints "null" because get(999) was not stubbed
 System.out.println(mockedList.get(999));

 verify(mockedList).get(0);
  • 参数匹配
 //stubbing using built-in anyInt() argument matcher
 when(mockedList.get(anyInt())).thenReturn("element");
 //stubbing using custom matcher (let's say isValid() returns your own matcher implementation):
 when(mockedList.contains(argThat(isValid()))).thenReturn("element");
 //following prints "element"
 System.out.println(mockedList.get(999));
 //you can also verify using an argument matcher
 verify(mockedList).get(anyInt());
 //argument matchers can also be written as Java 8 Lambdas
 verify(mockedList).add(someString -> someString.length() > 5);
  • 校验方法调用次数
//using mock
 mockedList.add("once");

 mockedList.add("twice");
 mockedList.add("twice");

 mockedList.add("three times");
 mockedList.add("three times");
 mockedList.add("three times");
 //following two verifications work exactly the same - times(1) is used by default
 verify(mockedList).add("once");
 verify(mockedList, times(1)).add("once");
 //exact number of invocations verification
 verify(mockedList, times(2)).add("twice");
 verify(mockedList, times(3)).add("three times");
 //verification using never(). never() is an alias to times(0)
 verify(mockedList, never()).add("never happened");
 //verification using atLeast()/atMost()
 verify(mockedList, atLeastOnce()).add("three times");
 verify(mockedList, atLeast(2)).add("five times");
 verify(mockedList, atMost(5)).add("three times");
  • 模拟无返回方法抛出异常
doThrow(new RuntimeException()).when(mockedList).clear();
//following throws RuntimeException:
mockedList.clear();
  • 校验方法调用顺序
// A. Single mock whose methods must be invoked in a particular order
 List singleMock = mock(List.class);
 //using a single mock
 singleMock.add("was added first");
 singleMock.add("was added second");
 //create an inOrder verifier for a single mock
 InOrder inOrder = inOrder(singleMock);
 //following will make sure that add is first called with "was added first, then with "was added second"
 inOrder.verify(singleMock).add("was added first");
 inOrder.verify(singleMock).add("was added second");

 // B. Multiple mocks that must be used in a particular order
 List firstMock = mock(List.class);
 List secondMock = mock(List.class);
 //using mocks
 firstMock.add("was called first");
 secondMock.add("was called second");
 //create inOrder object passing any mocks that need to be verified in order
 InOrder inOrder = inOrder(firstMock, secondMock);
 //following will make sure that firstMock was called before secondMock
 inOrder.verify(firstMock).add("was called first");
 inOrder.verify(secondMock).add("was called second");
 // Oh, and A + B can be mixed together at will
  • 校验方法是否从未调用
 //using mocks - only mockOne is interacted
 mockOne.add("one");
 //ordinary verification
 verify(mockOne).add("one");
 //verify that method was never called on a mock
 verify(mockOne, never()).add("two");
 //verify that other mocks were not interacted
 verifyZeroInteractions(mockTwo, mockThree);
  • 快速创建Mock对象
public class ArticleManagerTest {
   @Mock private ArticleCalculator calculator;
      @Mock private ArticleDatabase database;
      @Mock private UserProvider userProvider;
      @Before
      public void before(){
          MockitoAnnotations.initMocks(this);
      }
}
  • 自定义返回不同结果
when(mock.someMethod("some arg"))
   .thenThrow(new RuntimeException())  // 第一次会抛出异常
   .thenReturn("foo"); // 第二次会返回这个结果
//First call: throws runtime exception:
mock.someMethod("some arg"); // 第一次
//Second call: prints "foo"
System.out.println(mock.someMethod("some arg")); // 第二次
//Any consecutive call: prints "foo" as well (last stubbing wins).
System.out.println(mock.someMethod("some arg")); // 第n次(n> 2),依旧以最后返回最后一个配置
  • 对返回结果进行拦截
when(mock.someMethod(anyString())).thenAnswer(new Answer() {
    Object answer(InvocationOnMock invocation) {
        Object[] args = invocation.getArguments();
        Object mock = invocation.getMock();
        return "called with arguments: " + args;
    }
});
//the following prints "called with arguments: foo"
System.out.println(mock.someMethod("foo"));
  • Mock函数操作

可以通过doThrow(), doAnswer(), doNothing(), doReturn() and doCallRealMethod() 来自定义函数操作。

暗中调用真实对象

List list = new LinkedList();
List spy = spy(list);
//optionally, you can stub out some methods:
when(spy.size()).thenReturn(100);
//using the spy calls *real* methods
spy.add("one");
spy.add("two");
//prints "one" - the first element of a list
System.out.println(spy.get(0));
//size() method was stubbed - 100 is printed
System.out.println(spy.size());
//optionally, you can verify
verify(spy).add("one");
   verify(spy).add("two");
  • 改变默认返回值
Foo mock = mock(Foo.class, Mockito.RETURNS_SMART_NULLS);
Foo mockTwo = mock(Foo.class, new YourOwnAnswer());
  • 捕获函数的参数值
ArgumentCaptor argument = ArgumentCaptor.forClass(Person.class);
verify(mock).doSomething(argument.capture());
assertEquals("John", argument.getValue().getName());
  • 部分Mock
//you can create partial mock with spy() method:
List list = spy(new LinkedList());
//you can enable partial mock capabilities selectively on mocks:
Foo mock = mock(Foo.class);
//Be sure the real implementation is 'safe'.
//If real implementation throws exceptions or depends on specific state of the object then you're in trouble.
when(mock.someMethod()).thenCallRealMethod();

你可能感兴趣的:(mockito)