OpenWrt：WRTnode2P实现联网

登陆WRTnode2P（telnet或ssh）

使用microUSB供电，一头接在WRTnode2P标准底板的迷你usb接口，一头接到一个超过500ma的5v供电的地方，上电以后，WRTnode2P底板上的蓝灯亮起，里面的OpenWrt开始启动了，20秒后就能发现一个WRTnode2P_xxxx（xxxx指WRTnode2P mac地址的后四位）的Wi-Fi，用电脑或手机或ipad连上，密码是12345678。

首先通过ping openwrt.lan看看连上WRTnode2P没有，WRTnode2P的IP地址是192.168.8.1，openwrt.lan这个域名会被WRTnode2P拦截并解析到自己的ip地址。

如果第一次登陆WRTnode2P，或者之前没有给OpenWrt的root用户设置密码，那就telnet：

$ telnet 192.168.8.1 

或是

$ telnet openwrt.lan

或者已经设置过root密码了，那就ssh:

$ ssh [email protected]

或是

$ ssh [email protected]

联网

aps是WRTnode的自定义命令，扫描当前的Wi-Fi，结果如下所示：

# aps
WRTnode AP scaner.
Begin scaning APs, pls wait...
Finished.
APs available are...
ra0       get_site_survey:
Ch  SSID                             BSSID               Security               Signal(%)  
1   TP-LINK_0C9FE8                   3c:46:d8:0c:9f:e8   NONE                   0            
1   MERCURY_42D4                     e4:d3:32:de:42:d4   WPA1PSKWPA2PSK/AES     0        
2   360                              c8:3a:35:05:13:80   WPAPSK/AES             0        
2   superficial                      d8:42:ac:6a:14:40   WPA1PSKWPA2PSK/TKIPAES 29          
6   HUAWEI-HT8AYK                    b0:e5:ed:c7:7f:38   WPA2PSK/AES            0        
6   TP-LINK_403                      50:bd:5f:00:a6:90   WPA1PSKWPA2PSK/AES     0        
6   FAST_C98E9E11                    8c:21:0a:c9:8e:9e   WPA1PSKWPA2PSK/AES     0             
7   Phicomm_2CBFA0                   f0:eb:d0:2c:bf:a0   WPA1PSKWPA2PSK/TKIPAES 10       
11  TP-LINK_FE42                     24:69:68:e4:fe:42   WPA1PSKWPA2PSK/AES     0        

然后将WRTnode2P连上路由器：

# setwifi 连接的路由器SSID 对应的密码

看看WRTnode2P有没有从上级路由DHCP获取IP地址:

root@OpenWrt:/# ia
apcli0    Link encap:Ethernet  HWaddr 66:51:7E:00:82:8C  
          inet addr:192.168.0.102  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::6451:7eff:fe00:828c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:134 errors:0 dropped:0 overruns:0 frame:0
          TX packets:83 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:31804 (31.0 KiB)  TX bytes:6514 (6.3 KiB)

获取到IP后，看看是不是已经连上互联网了：

root@OpenWrt:/# ping www.baidu.com
PING www.baidu.com (115.239.211.112): 56 data bytes
64 bytes from 115.239.211.112: seq=0 ttl=55 time=5.686 ms
64 bytes from 115.239.211.112: seq=1 ttl=55 time=8.942 ms
64 bytes from 115.239.211.112: seq=2 ttl=55 time=5.893 ms
^C
--- www.baidu.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 5.686/6.840/8.942 ms

参考文章

WRTnode2P开箱指南