消息中间件 rabbitmq 级联-Federation

Federation Plugin

Introduction

The high-level goal of the federation plugin is to transmit messages between brokers without requiring clustering. This is useful for various reasons:

Loose coupling

The federation plugin can transmit messages between brokers (or clusters) in different administrative domains:

• they may have different users and virtual hosts;
• they may run on different versions of RabbitMQ and Erlang.

WAN-friendly

The federation plugin uses AMQP 0-9-1 to communicate between brokers, and is designed to tolerate intermittent connectivity.

Specificity

A broker can contain federated  and local-only components - you don't need to federate everything if you don't want to.

Scalability

Federation does not require O(n ²) connections between  n brokers (although this is the easiest way to set things up), which should mean it scales better.

What Does It Do?

The federation plugin allows you to make exchanges and queues federated. A federated exchange or queue can receive messages from one or more upstreams (remote exchanges and queues on other brokers). A federated exchange can route messages published upstream to a local queue. A federated queue lets a local consumer receive messages from an upstream queue.

Federation links connect to upstreams using RabbitMQ Erlang client. Therefore they can connect to a specific vhost, use TLS, use multiple authentication mechanisms.

For more details, see the documentation on federated exchanges and federated queues.

How is Federation Set Up?

To use federation, one needs to configure two things

• One or more upstreams that define federation connections to other nodes. This can be done via runtime parameters or the federation management plugin which adds a federation management tab to the management UI.
• One or more policies that match exchanges/queues and makes them federated.

Getting Started

The federation plugin is included in the RabbitMQ distribution. To enable it, use rabbitmq-plugins:

rabbitmq-plugins enable rabbitmq_federation

When using the management plugin, you will also want to enable rabbitmq_federation_management:

rabbitmq-plugins enable rabbitmq_federation_management

When using a federation in a cluster, all the nodes of the cluster should have the federation plugin enabled.

Information about federation upstreams is stored in the RabbitMQ database, along with users, permissions, queues, etc. There are three levels of configuration involved in federation:

• Upstreams: each upstream defines how to connect to another broker.
• Upstream sets: each upstream set groups together a set of upstreams to use for federation.
• Policies: each policy selects a set of exchanges, queues or both, and applies a single upstream or an upstream set to those objects.

In practice, for simple use cases you can almost ignore the existence of upstream sets, since there is an implicitly-defined upstream set called all to which all upstreams are added.

Upstreams and upstream sets are both instances of runtime parameters. Like exchanges and queues, each virtual host has its own distinct set of parameters and policies. For more generic information on parameters and policies, see the documentation on parameters and policies. For full details on the parameters used by federation, see the federation reference.

Parameters and policies can be set in three ways - either with an invocation of rabbitmqctl, a call to the management HTTP API, or (usually) through the web UI presented by rabbitmq_federation_management. (The web UI does not present all possibilities - in particular, it does not allow you to manage upstream sets.)

A simple example

Here we will federate all the built-in exchanges except for the default exchange, with a single upstream. The upstream will be defined to buffer messages when disconnected for up to one hour (3600000ms).

Define an upstream:

rabbitmqctl	rabbitmqctl set_parameter federation-upstream my-upstream \ '{"uri":"amqp://server-name","expires":3600000}'
rabbitmqctl (Windows)	rabbitmqctl set_parameter federation-upstream my-upstream ^ "{""uri"":""amqp://server-name"",""expires"":3600000}"
HTTP API	PUT /api/parameters/federation-upstream/%2f/my-upstream {"value":{"uri":"amqp://server-name","expires":3600000}}
Web UI	Navigate to Admin > Federation Upstreams > Add a new upstream. Enter "my-upstream" next to Name, "amqp://server-name" next to URI, and 36000000 next to Expiry. Click Add upstream.

Then define a policy that will match built-in exchanges and use this upstream:

rabbitmqctl	rabbitmqctl set_policy --apply-to exchanges federate-me "^amq\." \ '{"federation-upstream-set":"all"}'
rabbitmqctl (Windows)	rabbitmqctl set_policy --apply-to exchanges federate-me "^amq\." ^ "{""federation-upstream-set"":""all""}"
HTTP API	PUT /api/policies/%2f/federate-me {"pattern":"^amq\.", "definition":{"federation-upstream-set":"all"}, \ "apply-to":"exchanges"}
Web UI	Navigate to Admin > Policies > Add / update a policy. Enter "federate-me" next to "Name", "^amq\." next to "Pattern", choose "Exchanges" from the "Apply to" drop down list and enter "federation-upstream-set" = "all" in the first line next to "Policy". Click "Add" policy.

We tell the policy to federate all exchanges whose names begin with "amq." (i.e. all the built in exchanges except for the default exchange) with (implicit) low priority, and to federate them using the implicitly created upstream set "all", which includes our newly-created upstream. Any other matching policy with a priority greater than 0 will take precedence over this policy. Keep in mind that federate-me is just a name we used for this example, you can use any string you want there.

The built in exchanges should now be federated because they are matched by the policy. You can check that the policy has applied to the exchanges by checking the exchanges list in management or with:

rabbitmqctl list_exchanges name policy | grep federate-me

And you can check that federation links for each exchange have come up with Admin > Federation Status > Running Links or with:

rabbitmqctl eval 'rabbit_federation_status:status().'

In general there will be one federation link for each upstream that is applied to an exchange. So for example with three exchanges and two upstreams for each there will be six links.

For simple use this should be all you need - you will probably want to look at the AMQP URI reference. The federation reference contains more details on setting up upstreams and upstream sets.

Federation Connection (Link) Failures

Inter-node connections used by Federation are based on AMQP 0-9-1 connections. Federation links can be treated as special kind of clients by operators.

Should a link fail, e.g. due to a network interruption, it will attempt to re-connect. Reconnection period is a configurable value that's defined in upstream definition. See federation reference for more details on setting up upstreams and upstream sets.

Links generally try to recover ad infinitum but there are scenarios when they give up:

• Failure rate is too high (max tolerated rate depends on upstream's reconnect-delay but is generally a failure every few seconds by default).
• Link no longer can locate its "source" queue or exchange.
• Policy changes in such a way that a link considers itself no longer necessary.

By increasing  reconnect-delay for upstreams it is possible to tolerate higher link failure rates. This is primarily relevant for RabbitMQ installations where a moderate or large number of active links.

Federating Clusters

Clusters can be linked together with federation just as single brokers can. To summarise how clustering and federation interact:

• You can define policies and parameters on any node in the downstream cluster; once defined on one node they will apply on all nodes.
• Exchange federation links will start on any node in the downstream cluster. They will fail over to other nodes if the node they are running on crashes or stops.
• Queue federation links will start on the same node as the downstream queue. If the downstream queue is mirrored, they will start on the same node as the master, and will be recreated on the same node as the new master if the node the existing master is running on crashes or stops.
• To connect to an upstream cluster, you can specify multiple URIs in a single upstream. The federation link process will choose one of these URIs at random each time it attempts to connect.

Securing Federation Connections with TLS

Federation connections (links) can be secured with TLS. Because Federation uses a RabbitMQ client under the hood, it is necessary to both configure source broker to listen for TLS connections and Federation/Erlang client to use TLS.

To configure Federation to use TLS, one needs to

• Use the amqps URI scheme instead of amqp
• Specify CA certificate and client certificate/key pair via URI query parameters when configuring upstream(s)
• Configure Erlang client to use TLS

Just like with "regular" client connections, server's CA should be trusted on the node where federation link(s) runs, and vice versa.

Getting Help

If you have any questions or comments regarding RabbitMQ, feel free to ask them on RabbitMQ mailing list.