1. 找出AIX的WWN号,

hscroot@localhost:~> vtmenu
 ----------------------------------------------------------
  Managed Systems:
 ----------------------------------------------------------
   1) Server-9179-MHB-SN06F53ER
   2) Server-9179-MHB-SN06F53AR
 Enter Number of Managed System.   (q to quit): 2
 ----------------------------------------------------------
  Partitions On Managed System:  Server-9179-MHB-SN06F53AR
  OS/400 Partitions not listed
 ----------------------------------------------------------
   1)    ffjz-a                               Not Activated
   2)    js-gshx-dg-a                         Running
   3)    js-hxcx-dg-a-swhxcx                  Running
   4)    js-hxzg-dg-a                         Running
   5)    js-jcpt-dg-a                         Running
   6)    js-sky-dg-a                          Running
   7)    p780-sc-a                            Running
 Enter Number of Running Partition (q to quit): 4
AIX Version 7
Copyright IBM Corporation, 1982, 2015.
Console login: root
root's Password: 
*******************************************************************************
*                                                   *
*                                                   *
*  Welcome to AIX Version 7.1!                               *
*                                                  *
*                                                   *
*  Please see the README file in /usr/lpp/bos for information pertinent to    *
*  this release of the AIX Operating System.                       *
*                                                    *
*                                                    *
*******************************************************************************
Last unsuccessful login: Fri Jul 20 13:37:31 CST 2012 on ssh from 80.12.73.51
Last login: Sat Jul 21 13:20:55 CST 2012 on /dev/pts/0 from 80.12.131.105
js-hxzg-dg-a#lsdev -Cc adapter
ent0    Available 04-00    2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent1    Available 04-01    2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent2    Available 06-00    2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent3    Available 06-01    2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent4    Available 00-00-00 10 Gigabit Ethernet Adapter (ct3)
ent5    Available 01-00-00 10 Gigabit Ethernet Adapter (ct3)
ent6    Available          EtherChannel / IEEE 802.3ad Link Aggregation
ent7    Available          EtherChannel / IEEE 802.3ad Link Aggregation
fcs0    Available 02-00    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs1    Available 02-01    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs2    Available 03-00    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs3    Available 03-01    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs4    Available 07-00    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs5    Available 07-01    8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
hba0    Available 00-00    10 Gigabit Ethernet-SR PCI-Express Host Bus Adapter (2514300014108c03)
hba1    Available 01-00    10 Gigabit Ethernet-SR PCI-Express Host Bus Adapter (2514300014108c03)
pkcs11  Available          ACF/PKCS#11 Device
sissas0 Available 05-00    PCI Express x8 Planar 3Gb SAS Adapter
sissas1 Defined   08-00    PCI Express x8 Ext Dual-x4 3Gb SAS Adapter
vsa0    Available          LPAR Virtual Serial Adapter
js-hxzg-dg-a#lscfg -vpl fcs*
  fcs4             U78C0.001.DBJ5582-P2-C5-T1  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23500B93
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA0D47A2
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA0D47A2
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5582-P2-C5-T1
  fcs5             U78C0.001.DBJ5582-P2-C5-T2  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23500B93
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA0D47A3
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA0D47A3
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5582-P2-C5-T2
  fcs2             U78C0.001.DBJ5485-P2-C2-T1  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23400655
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA08D03C
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA08D03C
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5485-P2-C2-T1
  fcs3             U78C0.001.DBJ5485-P2-C2-T2  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23400655
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA08D03D
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA08D03D
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5485-P2-C2-T2
  fcs0             U78C0.001.DBJ5485-P2-C1-T1  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23400838
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA08DCEA
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA08DCEA
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5485-P2-C1-T1
  fcs1             U78C0.001.DBJ5485-P2-C1-T2  8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
        Part Number.................00E0806
        Serial Number...............1A23400838
        Manufacturer................001A
        EC Level.................... D77161
        Customer Card ID Number.....577D
        FRU Number..................00E0806
        Device Specific.(ZM)........3
        Network Address.............10000090FA08DCEB
        ROS Level and ID............02782037
        Device Specific.(Z0)........31004549
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........09030909
        Device Specific.(Z4)........FF781150
        Device Specific.(Z5)........02782037
        Device Specific.(Z6)........07732037
        Device Specific.(Z7)........0B7C2037
        Device Specific.(Z8)........20000120FA08DCEB
        Device Specific.(Z9)........US2.00X7 
        Device Specific.(ZA)........U2D2.00X7 
        Device Specific.(ZB)........U3K2.00X7 
        Device Specific.(ZC)........00000000
        Hardware Location Code......U78C0.001.DBJ5485-P2-C1-T2
  PLATFORM SPECIFIC
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5485-P2-C1-T1
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0,1
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5485-P2-C1-T2
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5485-P2-C2-T1
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0,1
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5485-P2-C2-T2
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5582-P2-C5-T1
  Name:  fibre-channel
    Model:  00E0806
    Node:  fibre-channel@0,1
    Device Type:  fcp
    Physical Location: U78C0.001.DBJ5582-P2-C5-T2


      找出LINUX的WWN号:

[root@localhost ~]# cat /sys/class/fc_host/host1/port_name 
0x21000024ff11bc40 
[root@localhost ~]# cat /sys/class/fc_host/host2/port_name 
0x21000024ff91df9a
[root@localhost ~]# cat /sys/class/fc_host/host3/port_name 
0x21000024ff91df9b
[root@localhost ~]# cat /sys/class/fc_host/host4/port_name 
0x21000024ff91df94
[root@localhost ~]# cat /sys/class/fc_host/host5/port_name 
0x21000024ff91df95


  2. 在交换机上找到每个主机的WWN号,WWN做双链路,每个交换机上会有各一个对于的WWN号

SNS5384_1:FID128:admin> switchshow |grep "47:a2"
 301    3   45   33a5c0   id    N8         Online      FC  F-Port  10:00:00:90:fa:0d:47:a2


SNS5384_2:FID128:admin> switchshow |grep "ea"
switchBeacon:   OFF
 302    3   46   34a6c0   id    N8         Online      FC  F-Port  10:00:00:90:fa:08:dc:ea

3. 然后跟华为存储的存储启动器,划zone

在SNS5384_1上把华为存储的启动器四个启动器  

20:09:00:2e:c7:43:e3:01 

20:19:00:2e:c7:43:e3:01

20:29:00:2e:c7:43:e3:01

20:39:00:2e:c7:43:e3:01跟主机的fcs4划zone

SNS5384_1:FID128:admin> switchshow |grep "47:a2"
 301    3   45   33a5c0   id    N8         Online      FC  F-Port  10:00:00:90:fa:0d:47:a2 
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_A_R1_P1_aix_fwskcx_fcs4","20:09:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_B_L1_P1_aix_fwskcx_fcs4","20:19:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_C_R1_P1_aix_fwskcx_fcs4","20:29:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_D_L1_P1_aix_fwskcx_fcs4","20:39:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> cfgadd "cfg01","HW18500V3_B_A_R1_P1_aix_fwskcx_fcs4;HW18500V3_B_B_L1_P1_aix_fwskcx_fcs4;HW18500V3_B_C_R1_P1_aix_fwskcx_fcs4;HW18500V3_B_D_L1_P1_aix_fwskcx_fcs4"
SNS5384_1:FID128:admin> cfgsave
WARNING!!!
The changes you are attempting to save will render the
Effective configuration and the Defined configuration
inconsistent. The inconsistency will result in different
Effective Zoning configurations for switches in the fabric if
a zone merge or HA failover happens. To avoid inconsistency
it is recommended to commit the configurations using the
'cfgenable' command.
Do you want to proceed with saving the Defined
zoning configuration only?  (yes, y, no, n): [no] y
Updating flash ...
SNS5384_1:FID128:admin> cfgenable "cfg01"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes 
to one or more traffic isolation zones, the update may result in  
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'cfg01' configuration  (yes, y, no, n): [no] y
zone config "cfg01" is in effect
Updating flash ...

在SNS5384_2上把华为存储的启动器四个启动器 

20:08:00:2e:c7:43:e3:01

20:08:00:2e:c7:43:e3:01

20:08:00:2e:c7:43:e3:01

20:08:00:2e:c7:43:e3:01跟主机的fcs0划zone

SNS5384_2:FID128:admin> switchshow |grep "ea"
switchBeacon:   OFF
 302    3   46   34a6c0   id    N8         Online      FC  F-Port  10:00:00:90:fa:08:dc:ea 
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_A_R1_P0_aix_fwskcx_fcs0","20:08:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_B_L1_P0_aix_fwskcx_fcs0","20:18:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_C_R1_P0_aix_fwskcx_fcs0","20:28:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_D_L1_P0_aix_fwskcx_fcs0","20:38:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> cfgadd "cfg01","HW18500V3_B_A_R1_P0_aix_fwskcx_fcs0;HW18500V3_B_B_L1_P0_aix_fwskcx_fcs0;HW18500V3_B_C_R1_P0_aix_fwskcx_fcs0;HW18500V3_B_D_L1_P0_aix_fwskcx_fcs0"
SNS5384_2:FID128:admin> cfgsave
WARNING!!!
The changes you are attempting to save will render the
Effective configuration and the Defined configuration
inconsistent. The inconsistency will result in different
Effective Zoning configurations for switches in the fabric if
a zone merge or HA failover happens. To avoid inconsistency
it is recommended to commit the configurations using the
'cfgenable' command.
Do you want to proceed with saving the Defined
zoning configuration only?  (yes, y, no, n): [no] y
Updating flash ...
SNS5384_2:FID128:admin> cfgenable "cfg01"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes 
to one or more traffic isolation zones, the update may result in  
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'cfg01' configuration  (yes, y, no, n): [no] y
zone config "cfg01" is in effect
Updating flash ...

最后一步需要在主机上 cfgmgr,或者LINUX 扫描硬件

4. AIX安装华为多路径流程:

下载地址:  https://share.weiyun.com/58lOzi6 

js-hxzg-dg-a#chmod +x unzip     
js-hxzg-dg-a#./unzip OceanStor_UltraPath_21.1.0_AIX.zip
Archive:  OceanStor_UltraPath_21.1.0_AIX.zip
   creating: AIX/
   creating: AIX/Docs/
  inflating: AIX/Docs/Open Source Software Notice.doc  
  inflating: AIX/install.tar         
   creating: AIX/Packages/
  inflating: AIX/Packages/UltraPath-8.01.2102.0048.AIX.ppc_64.install.bff  
   creating: AIX/Packages/Update/
  inflating: AIX/Packages/Update/UltraPath-8.01.2102.0048.AIX.ppc_64.ndu.bff  
  inflating: AIX/Packages/Update/UltraPath-8.01.2102.0048.AIX.ppc_64.update.bff  
   creating: AIX/Tools/
  inflating: AIX/Tools/cfg_upgrade   
  inflating: AIX/Tools/ouc           
  inflating: AIX/unattend_install.conf  
js-hxzg-dg-a#lslpp -l U*.*.rte
lslpp: 0504-132  Fileset U*.*.rte not installed.
js-hxzg-dg-a#cd AIX
js-hxzg-dg-a#ls
Docs                   Packages               Tools                  install.tar            unattend_install.conf
js-hxzg-dg-a#tar -xvf install.tar
x install.sh, 160823 bytes, 315 media blocks.
js-hxzg-dg-a#ls
Docs                   Packages               Tools                  install.sh             install.tar            unattend_install.conf
js-hxzg-dg-a#chmod +x install.sh
js-hxzg-dg-a#sh install.sh
        NOTICE 1   :The UltraPath for AIX requires services to be stopped during the install.
                   After the install is completed, the system must be restarted.
        NOTICE 2   :For properties of SAN HBA,please set dyntrk to yes and set fc_err_recov to fast_fail.
                   If not,the function of fail_over may be invalid.
The os is AIX 7.1
+-----------------------------------------------------------------------------+
                    Pre-installation Verification...
+-----------------------------------------------------------------------------+
Verifying selections...done
Verifying requisites...done
Results...
SUCCESSES
---------
  Filesets listed in this section passed pre-installation verification
  and will be installed.
  Selected Filesets
  -----------------
  UltraPath.AIX.ppc_64.rte 8.1.2102.48        # UltraPath for AIX
  << End of Success Section >>
+-----------------------------------------------------------------------------+
                   BUILDDATE Verification ...
+-----------------------------------------------------------------------------+
Verifying build dates...done
FILESET STATISTICS 
------------------
    1  Selected to be installed, of which:
        1  Passed pre-installation verification
  ----
    1  Total to be installed
0503-409 installp:  bosboot verification starting...
installp:  bosboot verification completed.
+-----------------------------------------------------------------------------+
                         Installing Software...
+-----------------------------------------------------------------------------+
installp:  APPLYING software for:
        UltraPath.AIX.ppc_64.rte 8.1.2102.48
Begin to check the size of the boot image
        NOTICE 1: The UltraPath for AIX requires services to be stopped during the install.
              After the install is completed, the system must be restarted.
        NOTICE 2: For properties of SAN HBA,please set dyntrk to yes and set fc_err_recov to fast_fail.
              If not,the function of fail_over may be invalid.
        NOTICE 3: If array disk exist in system,please delete it first.
              If not,the function of UltraPath may be invalid.
Add smit for ultrapath success.
+============================= A T T E N T I O N =============================+
You must restart your system for the configuration changes made to UltraPath to take effect.
+=============================================================================+
UltraPath will use the system hostname for alarm generation and automatic host registration. Make sure that the system hostname is correctly configured.
Finished processing all filesets.  (Total time:  36 secs).
0503-409 installp:  bosboot verification starting...
installp:  bosboot verification completed.
0503-408 installp:  bosboot process starting...
bosboot: Boot image is 55324 512 byte blocks.
0503-292 This update will not fully take effect until after a
        system reboot.
    * * *  A T T E N T I O N  * * *
    System boot image has been updated. You should reboot the
    system as soon as possible to properly integrate the changes
    and to avoid disruption of current functionality.
installp:  bosboot process completed.
+-----------------------------------------------------------------------------+
                                Summaries:
+-----------------------------------------------------------------------------+
Installation Summary
--------------------
Name                        Level           Part        Event       Result
-------------------------------------------------------------------------------
UltraPath.AIX.ppc_64.rte    8.1.2102.48     USR         APPLY       SUCCESS    
Install UltraPath For AIX Success.
js-hxzg-dg-a#shutdown -Fr

LINUX安装华为多路径流程:

下载地址:https://down.51cto.com/data/2461927 

                 https://share.weiyun.com/50tDCOo 

[root@localhost ~]# cd /tmp
[root@localhost tmp]# ls
OceanStor_UltraPath_21.1.0_RHEL.zip  pulse-UXXMfHGOXc0h
[root@localhost tmp]# unzip OceanStor_UltraPath_21.1.0_RHEL.zip
Archive:  OceanStor_UltraPath_21.1.0_RHEL.zip
   creating: RHEL/
   creating: RHEL/doc/
  inflating: RHEL/doc/Open Source Software Notice.doc  
  inflating: RHEL/install.sh         
   creating: RHEL/packages/
  inflating: RHEL/packages/UltraPath-21.02.048-OL5.i386.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-OL5.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-OL6.i386.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-OL6.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-OL7.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL4.i386.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL4.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL5.i386.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL5.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL6.i386.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL6.x86_64.rpm  
  inflating: RHEL/packages/UltraPath-21.02.048-RHEL7.x86_64.rpm  
  inflating: RHEL/unattend_install.conf  
[root@localhost tmp]# ls
OceanStor_UltraPath_21.1.0_RHEL.zip  pulse-UXXMfHGOXc0h  RHEL
[root@localhost tmp]# cd RHEL/
[root@localhost RHEL]# ls
doc  install.sh  packages  unattend_install.conf
[root@localhost RHEL]# ls -l
total 192
drwxr-xr-x 2 root root   4096 Feb 26  2018 doc
-rw-r--r-- 1 root root 182574 Feb 26  2018 install.sh
drwxr-xr-x 2 root root   4096 Feb 26  2018 packages
-rw-r--r-- 1 root root   1904 Feb 26  2018 unattend_install.conf
[root@localhost RHEL]# chmod +x install.sh 
[root@localhost RHEL]# ls -l
total 192
drwxr-xr-x 2 root root   4096 Feb 26  2018 doc
-rwxr-xr-x 1 root root 182574 Feb 26  2018 install.sh
drwxr-xr-x 2 root root   4096 Feb 26  2018 packages
-rw-r--r-- 1 root root   1904 Feb 26  2018 unattend_install.conf
[root@localhost RHEL]# ./install.sh 
iscsi is not installed.
complete FC checking.
Verify the UltraPath existence.
The UltraPath is not installed.
iscsi is not installed.
Modify system configuration.[file:/etc/modprobe.d/nxupmodules.conf,module:qla2xxx,item:qlport_down_retry,value:5]
Modify system configuration.[file:/etc/modprobe.d/nxupmodules.conf,module:lpfc,item:lpfc_nodev_tmo,value:5]
If the operating system is installed on a local drive of the server, you are advised
to choose boot from local; if the operating system is installed on a SAN storage
system, you must choose boot from san. Please choose the boot type of your system:
<1>--boot-from-Local
<2>--boot-from-SAN
please input your select:1
Preparing...                ##################################################
UltraPath                   ##################################################
User configuration is saved successfully.
The boot service is installed successfully.
The running service is installed successfully.
************************************Attention************************************
* UltraPath would modify some parameters of HBA cards for better performace. If *
* UltraPath is installed for the first time, you may need to update the initrd  *
* image before system reboot to make the modification take effect.              *
*********************************************************************************
*********************************************************************************
* UltraPath will use the system hostname for alarm generation and automatic host*
* registration. Make sure that the system hostname is correctly configured..    *
*********************************************************************************
The installation is complete. Whether to restart the system now?
:y
Broadcast message from [email protected]
        (/dev/pts/0) at 15:59 ...
The system is going down for reboot NOW!


添加主机--->添加主机组--->创建映射视图

AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第1张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第2张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第3张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第4张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第5张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第6张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第7张图片

创建LUN组和主机组,形成对应关系

AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第8张图片

AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第9张图片

添加LUN组,加到对应的主机对应的LUN组

AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第10张图片


AIX或LINUX,通过华为存储V3上添加对应LUN组,分配存储资源_第11张图片